Voice Recorder - Sharp GX17 User Manual

Rate Conversion (M 3-3-2)
You can also use the calculator as a currency calculator
to convert from/to a home currency using a conversion
rate that you enter.
To Set a Currency Conversion Rate
→
"Applications" "Calculator"
1.
Select "Foreign -> Domestic" or "Domestic ->
Foreign".
2.
Enter the currency conversion rate.
To delete all digits, press [Clear].
To Convert a Value
→
"Applications" "Calculator"
1.
Enter the value to be converted.
2.
Press [Options] and select "In Domestic" or "In
Foreign".
The result is displayed.
If you select "Exchange Rate" in step 2, you can set
a currency conversion rate.
Note
• You cannot perform step 2 when an arithmetic
+ − × ÷
symbol ( , , or ) is displayed.
→
"Exchange Rate"
→
"Calculator"

Voice Recorder

This allows you to record a voice clip of up to 30
seconds, which can be sent within a multimedia
message. The recorded voice clip is registered in Saved
Sounds. Voice clips are saved in ".amr" format.
Recording a Voice Clip
→
"Applications" "Voice Recorder"
1.
Press to start recording.
To stop recording before the recording time is over,
press .
2.
Select "Save" to save the voice clip.
To play back the recorded voice clip, select
"Playback".
To record a voice clip again, press [Cancel].
Note
• To change recorded size before recording, press
[Options] and select "Record Size". Then select
"Extended Voice" or "For Message".
• When the Message Size described on page 50 is set to
"100 KB", "Record Size" is not displayed.
(M 3-4)
Applications 77