Positioning Settings; Maps - Nokia 002P1V9 User Manual

Options Satellite
>
satellites, a bar for each satellite is shown in the
satellite info view. The longer the bar, the stronger the
satellite signal. When your device has received enough
data from the satellite signal to calculate the
coordinates of your location, the bar turns black.
Initially your device must receive signals from at least
four satellites to be able to calculate the coordinates of
your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when more
satellites are found.

Positioning settings

Select Menu Tools
>
Positioning.
To use a specific positioning method to detect the
location of your device, select
To select a positioning server, select
server.

Maps

Select Menu Tools
>
With Maps, you can see your current location on the
map, browse maps for different cities and countries,
search for addresses and different points of interest,
plan routes from one location to another, and save
70
locations and send them to compatible devices. You
status. If your device has found
Settings General
> >
Positioning methods.
Positioning
> Maps.
can also purchase licences for extra services, such as
travel guides, traffic information, and navigation
service with voice guidance. These services are not
available for all countries or regions.
If you browse to an area which is not covered by maps
already downloaded in your device, a map for the area
is automatically downloaded through the internet.
Some maps may be available in your device or memory
card. You can also use the Nokia Map Loader PC
software to download maps. To install Nokia Map
Loader to a compatible PC, go to www.nokia.com/
maps.
Downloading maps may involve the transmission of
large amounts of data through your service provider's
network. Contact your service provider for information
about data transmission charges.
When you use Maps for the first time, you may need to
>
select an access point for downloading maps. To
change the access point later, select
Tools Settings
>
point.
The GPS function requires an external Bluetooth GPS
receiver. Your device does not have an integrated GPS
receiver. To use GPS function and navigation, you need
to connect your device to a compatible GPS receiver
using Bluetooth.
About Maps
To connect to the internet automatically when you
start Maps, select
Internet Go online at start-up
>
Options
Internet Default access
> >
Options Tools Settings
> >
> Yes.
>
>