Connect Pc To Web - Nokia 002P1V9 User Manual

WLAN security mode
•
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
additional settings.
WLAN security settings
•
settings for the selected security mode.
Homepage
•
page you want to display as the home page
when you use this access point.
To set up a WLAN access point automatically, use the
WLAN wizard. Select
wiz..
Advanced access point
settings for WLAN
Select Menu Tools
>
Access points.
After setting up a basic access point for WLAN, select
Options Advanced
>
following advanced settings:
IPv4 settings — Enter the device IP and name
•
server addresses for the IPv4 internet protocol.
IPv6 settings — Select or enter the name server
•
addresses for the IPv6 internet protocol.
Ad-hoc channel
•
automatically. To enter the channel number (1-11)
manually, select
Proxy server address
•
68
address.
— You must select the
— Edit the security
— Enter the web address of the
Menu Connectivity
>
Settings Connection
> >
settings, and define the
— The channel is usually chosen
User defined.
— Enter the proxy server
Proxy port number
•
number.

Connect PC to web

You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of
your device and your PC.
2. Select Connect PC to
is automatically installed from your device to the
PC.
WLAN
>
3. Accept the installation in your PC. Accept also the
connection, if prompted. When the connection to
the web is established, the web browser of your PC
opens.
You must have administrator rights to your PC, and the
autorun option enabled in the PC.
>
— Enter the proxy server port
web. The necessary software