Table of Contents
Advertisement
Authenticate hologram
1
When you look at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements
logo when looking from another angle.
2
When you angle the hologram left, right, down and
up, you should see 1, 2, 3 and 4 dots on each side
respectively.
Successful completion of the steps is not a total assurance
of the authenticity of the battery. If you cannot confirm
authenticity or if you have any reason to believe that your
Nokia battery with the hologram on the label is not an
authentic Nokia battery, you should refrain from using it,
and take it to the nearest Nokia authorised service centre
or dealer for assistance.
© 2009 Nokia. All rights reserved.
Care and maintenance
To find out more about original Nokia batteries, see
www.nokia.com/batterycheck
Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your warranty
coverage.
Keep the device dry. Precipitation, humidity, and all
•
types of liquids or moisture can contain minerals
that will corrode electronic circuits. If your device
does get wet, remove the battery, and allow the
device to dry completely before replacing it.
Use a soft, clean, dry cloth to clean any lenses, such
•
as camera, proximity sensor, and light sensor lenses.
Do not use or store the device in dusty, dirty areas.
•
Its moving parts and electronic components can be
damaged.
Do not store the device in hot areas. High
•
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
Do not store the device in cold areas. When the
•
device returns to its normal temperature, moisture
can form inside the device and damage electronic
circuit boards.
Do not attempt to open the device other than as
•
instructed in this guide.
Do not drop, knock, or shake the device. Rough
•
handling can break internal circuit boards and fine
mechanics.
Do not use harsh chemicals, cleaning solvents, or
•
strong detergents to clean the device.
Do not paint the device. Paint can clog the moving
•
parts and prevent proper operation.
67
67
Advertisement
Table of Contents
