Table of Contents
Advertisement
Inserting the SIM card,
miniSD™ card, and battery
When you register with a service provider, you
receive a Subscriber Identity Module (SIM)
card. Your phone must have a SIM card in order
to make calls. The SIM card is a computer chip
that contains your phone number, phonebook
information, and service provider information.
Handle it with care and do not bend it or expose
it to static electricity or dirt. Be sure the power
to your phone is off before you insert your SIM
card.
The SIM card and the miniSD™ card slots are
situated underneath the battery.
To insert the SIM card:
1. Slide the cover in the
direction of the arrow.
Lift and set it aside.
2. Remove the
battery. The battery
compartment has
a groove at the top
to make it easier to
remove the battery.
Getting started
To insert the miniSD™ card:
NOTE: In some regions, the miniSD™ card may be supplied as
an optional accessory only.
3. Push the SIM card
holder in the direction
of the "Open" arrow,
then lift it using your
fingernail.
4. Insert the SIM card
into the holder. The
gold contacts of the
SIM card should face
down and the notched
edge should be on the
top right corner.
5. Place the SIM card
holder back in place
and slide in the
direction of the "Lock"
arrow to secure.
1. Place the card in the
slot with the gold
contacts facing down.
2. Secure the miniSD™
card in place with the
metal clasp by moving
it towards the card.
Notched edge
Gold contact
7
Advertisement
Table of Contents
