Page 1
Reorder No. 10447 Manufactured for: Dynarex Corporation 10 Glenshaw Street Orangeburg, NY 10962 USA • www.dynarex.com Made in China DynaRest Airfloat 500 ™ Air Mattress with Digital Pump 50ºC IP21 122ºF -15ºC 5ºF...
The DynaRest AirFloat 500 Air Mattress is ™ ™ AirFloat 500 Air Mattress with Digital Pump. designed for bed sore and wound care therapy This user’s manual provides instructions on treatment and prevention, which may occur how to correctly use the product and gives during an extended hospital stay and nursing valuable advice regarding your safety.
CONTROLS AND FEATURES NOTE: Unit locks all functions DynaRest Airfloat 500 ™ automatically after two minutes of use. To unlock, press and hold Reorder No. 10447 the Lock button for three seconds. Press & hold for 3 sec. to unlock 1.
Page 4
FRONT BACK 1 - Control panel 3 - Fuse 2 - Female quick connector 4 - Main filter 5 - Protective cap of filter 6 - Hook 1 - Pillow 2 - Cover 3 - Fixing belt 4 - Low air loss holes 5 - Male quick connector 6 - Protective cap of connector 7 - Air tubing...
In case of repair, use only original spare parts separate the pump from the mattress and and accessories. For spare parts and place the mattress flat. accessories, please contact Dynarex or an authorized dealer. 2. Fold the mattress in two from mattress foot to head.
INSTALLATION 1. This is a replacement mattress. Place the 3. Connect air hose connectors from air mattress directly on the bed frame, with the mattress to the pump unit. Ensure the air air hose connectors positioned at the hoses are not kinked or tucked under the footboard.
The Warranty shall not apply under the contained herein. following conditions: • Problems arising from normal wear If you have a question about your Dynarex • Problems arising from failure to adhere to device or this warranty, please contact an the product instructions authorized Dynarex dealer.
Need help?
Do you have a question about the Airfloat 500 and is the answer not in the manual?
Questions and answers