Table of Contents
Related Manuals for dynarex Bari+Max 10439
Summary of Contents for dynarex Bari+Max 10439
- Page 1 Reorder No. 10439 Reorder No. 10445 Reorder No. 10446 Bariatric Airfloat Air Mattress with Pump User’s Manual Manufactured for: Dynarex Corporation 10 Glenshaw Street | Orangeburg, NY 10962 USA • www.dynarex.com | Made in China...
-
Page 2: Intended Use
• Never block the air openings of the • Dynarex declines all liability for any product or place it on a soft surface, such consequences resulting from incorrect as a bed or couch, where the air openings use of this product and from any may be blocked. -
Page 3: General Description
Bari+Max Support Where You Need It GENERAL DESCRIPTION Pump Controls and Features POUNDS WEIGHT SETTING CYCLE TIME ALARM MINUTES POWER ALTERNATING ALTERNATING STATIC MAX FIRM SEAT INFLATE PRESSURE FAILURE FAILURE NOTE: Unit locks all functions automatically LOCK POWER after 5 minutes of use. MUTE Bariatric Airfloat Air Mattress To unlock, press and... - Page 4 Bari+Max Support Where You Need It (1) Pillow Section - does not alternate (2) Cover (3) Fixing belt (4) Low air loss holes (5) Male quick connector (6) Air tubing (7) CPR Valve CELL-ON-CELL FEATURE The mattress is a 10″ cell-on-cell type Please note this is only temporary.
-
Page 5: Installation
Bari+Max Support Where You Need It INSTALLATION 1. This is a replacement mattress. Place the mattress directly on the bed frame, with the air hose connectors positioned at the footboard. 2. Hang the pump onto the bed board (footboard side) using the hooks on back of the pump, or place it on a flat surface. -
Page 6: Maintenance
2. Do not immerse or soak pump unit. For spare parts and accessories please 3. After cleaning, dry the mattress without contact Dynarex or an authorized dealer. direct sunlight exposure. 4. Check that the connection tubes are not GENERAL CONDITIONS OF DISPOSAL obstructed by dust or other object. -
Page 7: Technical Features
Bari+Max Support Where You Need It TECHNICAL FEATURES Pump Control Unit FEATURE PUMP Power supply 20 V / 60 H z Power 15.5 W Fuse rating 1A / 250 V Pressure 20 mmhg~60 mmhg Dimensions 12½″ (W) × 12″ (L) × 6″ (H) Cycle 10/15/20/25 mins Weight... - Page 8 • Problems arising from failure to adhere herein. to the product instructions If you have a question about your Dynarex • Problems arising from misuse, device or this warranty, please contact an negligence, accident or improper authorized Dynarex dealer.
Need help?
Do you have a question about the Bari+Max 10439 and is the answer not in the manual?
Questions and answers