Changing The Tone Of An Image (My Colors) - Canon PowerShot A3000 IS User Manual

Changing the Tone of an Image (My
Colors)
You can change the tone of an image to sepia or black and white when
shooting.
My Colors Off
Vivid
Neutral
Sepia
B/W
Custom Color
The white balance cannot be set in the
Custom Color
●
The contrast, sharpness, and color saturation in an image can be chosen
and set at 5 different levels.
Choose My Colors.
1
After pressing the m button, press the op
●
buttons to choose
Choose an option.
2
Press the qr buttons to choose an option,
●
then press the m button.
The setting you chose will display on the
screen.
Emphasizes the contrast and color saturation for a vivid
impression.
Tones down the contrast and color saturation for neutral hues.
Sepia tones.
Black and white.
You can adjust contrast, sharpness, and color saturation etc. to
your preference.
●
Follow Step 2 above to choose
press the l button.
Press the op buttons to choose an option,
●
then press the qr buttons to choose a
value.
●
The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
Press the l button to accept the setting.
●
.
—
and modes (p. 72).
, then
73