Canon PowerShot A3000 IS User Manual page 123

Displaying the Overlay
●
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for postcard size prints.
•
In mode, you cannot set [3:2 Guide] or [Both].
•
Grid Lines will not be recorded on the image.
•
The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
Changing the IS-Mode Settings
●
•
If camera shake is too strong, attach the camera to a tripod. If you
attach the camera to a tripod, you should set the IS Mode to [Off].
•
When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
Changing Shooting Function Settings
Choose [Disp. Overlay], then press the qr
●
buttons to choose an option.
Grid Lines A grid overlays the display.
Gray bars will appear on the top
and bottom of the display. This
3:2 Guide
area will not print when printing
on paper with a 3:2 aspect ratio.
Both grid lines, and the 3:2
Both
guide will display.
Choose [IS Mode], then press the qr
●
buttons to choose an option.
Image stabilization is always on.
You can confirm the result
Continuous directly on the display, which
makes it easier to check the
composition or focus.
Image stabilization is only active
Shoot Only
at the moment of shooting.
Image stabilization only counters
up and down motion. This option
Panning
is recommended for shooting
objects moving horizontally.
123