Nikro EXPRESS AIR BEAST1000 Instruction Manual

Upright air scrubber

Advertisement

EXPRESS AIR
BEAST1000
UPRIGHT
AIR SCRUBBER
MODEL #BEAST1000
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EXPRESS AIR BEAST1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nikro EXPRESS AIR BEAST1000

  • Page 1 EXPRESS AIR BEAST1000 UPRIGHT AIR SCRUBBER MODEL #BEAST1000 INSTRUCTION MANUAL...
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. “READ AND SAVE THESE INSTRUCTIONS” “READ AND SAVE THESE INSTRUCTIONS” RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY • Unit must be electrically grounded. • Do not use an adapter. •...
  • Page 3 All Nikro Industries Inc. products that have rated efficiencies of 99.97% @ 0.3 microns and/or 99.99% @ 0.3 microns, have H.E.P.A. filters that have been individually tested to meet these minimum efficiencies. Although all the filters have been pre-tested, the possibility of leaks or filter failure due to handling, transportation, punctures, loaded filters, moisture, wear and tear, etc., does...
  • Page 4 Your #BEAST1000 Air Scrubbing System has been thoroughly tested and inspected at the factory and is fully assembled and ready for use. However, prior to plugging the unit in, inspect it for any damage that may have occurred during shipping. Inspect and tighten the HEPA filter hold down nuts, which may have loosened during transportation. ELECTRICAL RATING: 115V 3.5 Amps...
  • Page 5: Filter Maintenance

    NOTE: FILTERS SHOULD BE REPLACED IMMEDIATELY IF TORN OR DAMAGED. USE OF ANY OTHER FILTERS THAN ORIGINAL NIKRO REPLACEMENT PARTS VOIDS THE PRODUCT WARRANTY AND PERFORMANCE CLAIMS TO AVOID CROSS CONTAMINATION CHANGE ALL FILTERS AFTER EVERY REMEDIATION...
  • Page 6: Troubleshooting

    BEFORE OPERATING THE UNIT 1. Inspect cord and plug for damage. 2. Visually inspect the HEPA Filter for damage, punctures or tears. If you are operating in or exhausting into a highly sensitive area it is strongly recommended that this unit is independently tested to assure proper filtration efficiencies.
  • Page 7 #BEAST1000 ASSEMBLY PC NO PART NO PART NAME 862193 POLY CABINET 862222 CABINET DOOR 862176 HEPA FILTER 862224 MOTOR HOUSING ASSY 8” WHEEL 862195 2” CASTER 862221 862226 PS1000 HANDLE 16”X16”X2” PLEATED FILTER 860959 17”X17”X1” FILTER PAD 860958 862227 CONTROL PANEL 862225 PS1000 AXLE 862223...
  • Page 8 CONTROL PANEL PART NO PART NAME 861026 VARIABLE SPEED CONTROL 862110 GFCI OUTLET 860976 CIRCUIT BREAKER 860954 HOUR METER 861067 POWER INDICATOR LIGHT 520005 FILTER INDICATOR LIGHT 860721 PRESSURE RELIEF BARB...
  • Page 9: Warranty

    WARRANTY Nikro Air Scrubbers are warranted for 1 year from the date delivered to the original end user and may not be assigned or transferred. Parts, which become defective due to faulty workmanship or materials during normal use in this period will be repaired or exchanged at no charge if returned and approved by an authorized Nikro service center.

Table of Contents