Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nikro PS2009
Summary of Contents for Nikro PS2009
- Page 1 PORTABLE POLY AIR SCRUBBER MODEL #PS2009 INSTRUCTION MANUAL...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. “READ AND SAVE THESE INSTRUCTIONS” RISK OF ELECTRIC SHOCK CAN CAUSE INJURY OR DEATH. UNPLUG UNIT BEFORE SERVICING. TO REDUCE THE RISK OF ELECTRIC SHOCK: CONNECT TO A GFCI OUTLET, DO NOT USE AN EXTENSION CORD.
- Page 3 All Nikro Industries Inc. products that have rated efficiencies of 99.97% @ 0.3 microns and/or 99.99% @ 0.3 microns, have H.E.P.A. filters that have been individually tested to meet these minimum efficiencies. Although all the filters have been pre-tested, the possibility of leaks or filter failure due to handling, transportation, punctures, loaded filters, moisture, wear and tear, etc., does...
- Page 4 The model #PS2009 Air Cleaning unit is equipped with a Filter-Monitor gauge. This gauge is located on the control panel of the unit. When gauge reads 1.75" or higher, filter maintenance is required and the following steps should be taken: 1.
- Page 5 BEFORE OPERATING THE UNIT 1. Inspect cord and plug for damage. 2. Visually inspect the HEPA Filter for damage, punctures or tears. If you are operating in or exhausting into a highly sensitive area it is strongly recommended that this unit is independently tested to assure proper filtration efficiencies.
- Page 6 #PS2009 ASSEMBLY PC NO PART NO PART NAME 860726 STRIKE 862096 DOOR 862442 DOOR GASKET 550047 FILTER PAD 550048 PLEATED FILTER 862062 HEPA HOLD DOWN BRACKET 550046 HEPA FILTER 862599 BLOWER ASSEMBLY 860725 LATCH 860724 HANDLE 862243 FIXED WHEEL 862244...
- Page 7 CONTROL PANEL PART NO PART NAME 861853 THREE WAY SWITCH 860699 FILTER MONITOR GAUGE 861854 CIRCUIT BREAKER 860954 HOUR METER 860721 GAUGE RELIEF BARB #PS2009 WIRING DIAGRAM...
- Page 8 WARRANTY Nikro Air Scrubbers are warranted for 1 year from the date delivered to the original end user and may not be assigned or transferred. Parts, which become defective due to faulty workmanship or materials during normal use in this period will be repaired or exchanged at no charge if returned and approved by an authorized Nikro service center.
Need help?
Do you have a question about the PS2009 and is the answer not in the manual?
Questions and answers