Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Allnet ALL-BM200VDSL2V
Summary of Contents for Allnet ALL-BM200VDSL2V
- Page 1 VDSL2 / ADSL BRIDGE MODEM ALL-BM200VDSL2V USER MANUAL...
- Page 2 All brand and product names are the trademarks of their respective owners. © Copyright 2015 All rights reserved. Default-IP 192.168.1.1 Username & Password: admin © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
-
Page 3: Table Of Contents
6. Appendix: Frequently Asked Questions ............27 6.1 Power, Hardware, Connections and LEDs .................27 6.2 Device Access and Login ......................27 6.3 Internet Access..........................28 7. CE and GPL ......................29 © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 4: Overview
1. Overview Thank you for choosing our product. The ALL-BM200VDSL2V VDSL Router uses Broadcom’s CPE solution that fully complies with DSL, DSL2, DSL2+ standards. It will provide your SOHO with convenient Internet access. 1.1 Features 1.1.1 Data rate Downstream data rate up to 50 Mbps, Upstream data rate up to 100 Mbps 1.1.2 DSL Compliance... -
Page 5: Atm Capabilities
Web Based GUI Upgrade or update via FTP/HTTP Command Line Interface via Telnet Diagnostic Test Firmware upgrade-able for future feature enhancement 1.1.7 Operating System Support WINDOWS 98/SE/ME/2000/XP/VISTA/7/8 Macintosh LINUX © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 6: Environmental
Never install telephone wiring during storm. Avoid using a telephone during an electrical storm. There might be a risk of electric shock from lightening. Do not install telephone jacks in wet locations and never use the product near water. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... - Page 7 DSL Router when you access the Internet. Under the above condition, if you also install telephone with anti-cheat-dial device, please pull out this kind of telephone, otherwise DSL Router may occur frequently off-line. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
-
Page 8: Hardware Description
RJ45 cable Reset System reset or reset to factory defaults ON/OFF Switch it on or off Power Connect tot he supplied power adapter © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 9: Hardware Installation
Router, and the Router may introduce noise to the telephone line. To prevent this from happening, a small external splitter must be connected to each telephone. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 10: Pc Configuration Guide
4. In the Configure IPv4 box under TCP/IP, select Static IP for IP address 192.168.1.2, subnet mask 255.255.255.0, default gateway 192.168.1.1 and Static DNS Server for 192.168.1.1 or 8.8.8.8. Then click OK. Click Apply to save the settings at last. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 11: Web-Based Management Guide
5.2 Internet Access Configuration 5.2.1 Quick Setup Routing 1. After log in, you will see the following screen. Click Quick Setup from the panel and then click Next. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... - Page 12 If your ISP provide ATM mode please input VPI/VCI parameters. Then select WAN service and input PPP configuration. Most ISP provides PPP username and password. Then click Next. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
-
Page 13: Adsl Setup
2. Click Add to configure PVC identifier, select DSL latency and select connection mode according to your local occasion. After the configuration, you need to click Apply/Save. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... - Page 14 6. Input PPP Username & PPP Password and then click Next. The user interface allows a maximum of 256 characters in the user name and a maximum of 32 characters in the password. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 15 IP address and port. Someone on the Internet only needs to know the mapping scheme in order to send packets to a device behind the VDSL Device. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 16 The VDSL gateway bridges the IP packets between WAN and LAN ports, unless the packet is addressed to the gateway's LAN IP address. 7. Select a preferred wan interface as the system default gateway. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 17 9. Make sure that the settings below match the settings provided by your ISP. Click on the Apply/Save button to save your configurations. 10. Then you will see the following screen at Device Info. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
-
Page 18: Vdsl Setup
2. Click Add to configure PTM Priority, select DSL latency and select connection mode according to your local occasion. After the configuration, you need to click Apply/Save. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... - Page 19 6. Input PPP Username & PPP Password and then click Next. The user interface allows a maximum of 256 characters in the user name and a maximum of 32 characters in the password. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 20 Use Static IPv4 address: If the ISP gave you a static (fixed) IP address, select this option and enter it in the IP Address field. If the ISP did not give you a static IP address, clear the Use Static © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 21 8. Get DNS server information from the selected WAN interface or enter static DNS server IP addresses. If only a single PVC with IPoA or static MER protocol is configured, you must enter static DNS server IP addresses. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 22 9. Make sure that the settings below match the settings provided by your ISP. Click on the Apply/Save button to save your configurations. 10. Then you will see the following screen at Device Info. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
-
Page 23: Lan Settings
This is the IP address that other devices on your local network will use IP address to connect to the modem. Subnet mask This defines the size of your network. The default is 255.255.255.0. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 24: Management
Note: If you want to cancel all modification that you do on the Router, please select from “Admin -> Commit/Reboot -> Factory Default Configuration -> Reboot” to restore factory default settings. 5.3.2 Access Control © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 25: Backup
Choose the path where your settings want to set in. Note: If you want to cancel all modification that you do on the Router, please select from “Maintenance -> Reboot -> Restore factory default settings. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 26: Restore Default
Do not turn off the power when the updating is not finished！When it finished, you can’t turn back to the default version unless you have the previous firmware! © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 27: Appendix: Frequently Asked Questions
If this does not work, you have to reset the device to its factory defaults. I cannot see or access the Login screen in the web configurator. Make sure you are using the correct IP address. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 28: Internet Access
Re- configure VDSL router and reboot it. If you still cannot work it out, you may need to verify these variables with the service provider. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... -
Page 29: Ce And Gpl
82110 Germering Your request should include: (i) the name of the covered binary, (ii) the version number of the ALLNET product containing the covered binary, (iii) your name, (iv) your company name (if applicable) and (v) your return mailing and email address (if available). -
Page 30: Gnu General Public License Terms And Conditions For Copying, Distribution And Modification
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... - Page 31 NO WARRANTY © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
-
Page 32: End Of Terms And Conditions
General Public License is the better strategy to use in any particular case, based on the explanations below. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted... - Page 33 License and to the absence of any warranty; and distribute a copy of this License along with the Library. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 34 "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 35 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
- Page 36 Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice That's all there is to it! © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
Need help?
Do you have a question about the ALL-BM200VDSL2V and is the answer not in the manual?
Questions and answers