Hyundai Pro Series, Jupiter HSL982402 Manual

MAIN PARTS

1. Solar Panel
2. Switch Button
3. Lamp Body
4. LED
5. PIR

TECHNICAL SPECIFICATIONS

Material: ABS

Size: 151X 130 X 137mm

Battery: 3.7V 2000mAh

LED quantity: 20pcs

Light Effect: Max 1000 Lumens

Solar Panel: Monocrystalline Silicon 1.5W

Color temp: 4000K

Sensor: PIR

Charging hours: 7hours

Sensor angle: Max 120 degrees

Sensing distance: >5m

Waterproof: IP65

HOW TO INSTALL THE DEVICE

1. Take off the bracket from the lamp body.
   
2. Drilling and embedding the expansion screws into the wall.
   
3. Fix the bracket by screws onto the wall.
   
4. 
   Hang the lamp body on the bracket.
   

WORKING PROCESS INSTRUCTIONS

SWITCH BUTTON:

1. ON/OFF: Long press for 1.5 seconds. (After the initial activation, the lamp will turn on/off automatically when it gets dark/dawn.)
2. Change lighting mode: Short press.
   

LIGHTING MODES:

M1: 25% brightness until dawn.
M2: 10% brightness + PIR (30 seconds).
M3: 0% brightness + PIR (30 seconds).
M4: 100% brightness until dawn.

SAFETY PRECAUTIONS

SPECIAL NOTE

1. Avoid installing the lamp in areas that face away from the sun, under shadows, or between tall buildings. This can result in insufficient sunlight absorption and reduced brightness and operating time.
2. Do not use the lamp in temperatures above 45°C or below 0°C. This can cause rapid battery deterioration and impact battery life or even cause damage.
3. Only use standard accessories to install the lamp. Using non-standard accessories may result in accidents for which the installer will be held responsible.
4. It is recommended to charge the lamp at least every 3 months to maintain the activity of the lithium battery.
5. If the product has been stored in a warehouse for more than one year, perform a full charge and discharge inspection to ensure the battery is in good condition. If not, refrain from using the product.

1. Keep the device away from fire and oil to avoid any fire or explosion.
2. Only professional technicians should attempt to disassemble the light to avoid damaging it.
3. It is strictly forbidden to disassemble the battery for personal use.
4. If the lamp is not charged for 3 days, the battery may be out of power. Please charge it under bright sunlight.
5. To ensure the lamp works optimally for a long time, regularly clean the solar panel based on the local dust conditions. It is suggested to clean it at least once every 6 months.
6. Long-term static storage (over one year) of the product can cause damage or leakage to the internal battery. If the battery leaks and is suddenly charged by the sun, it can cause ignition.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Hyundai Pro Series, Jupiter HSL982402 Manual