Specifications; Power Requirements; Power Amplifier - YORKVILLE PULSE PS210P Manual

PS210P
North American: 120VAC 60 Hz
Power (Internal Amp): 600 Watts
Input Impedance: 80 kOhms or greater
2 x 10" drivers, 2-Ohm, 600 Watts (total)
Maximum SPL: 126 dB
Frequency response: 45 Hz to 110 Hz
Inputs: 2 x 1/4", Outputs: 2 x 1/4"
Tip: Positive, Ring: Negative, Sleeve: Optional
The sleeves of the inputs are not grounded except when the GROUND LIFT
push-button is set to GND. Then grounding is done through a 100 ohm protection
device in order to prevent damage due to miswiring.
Clipping, Excursion, Average Voice Coil Current.

Power Requirements

300 VA
European: 230VAC 50 Hz
300 VA

Power Amplifier

Speakers
Performance
Input Connections
Grounding
Limiting
Weight
77 lbs. (35 kg.)
Dimensions
(HxWxD): 19.8" x 22.5" x 22.0"
50.3 x 57.1 x 55.9 cm
4