Summary of Contents for Allegro Packets Allegro 500
Page 1
4. Management Interface Configuration 8. Manual 1. Package Contents The Allegro Network Multimeter package contains the following items: 1 x Allegro 500 or 510 1 x Power supply 1 x WiFi management USB adapter 1 x Power cable (already pre-installed)
Page 2
2.2 Network Measurement Installation (Data Plane) The Allegro 500 / 510 analyzes all data traffic transmitted through all network interfaces. The Allegro 500 is equipped with four 10 / 100 / 1000Base-T capture ports, while the Allegro 510 is equipped with 10 / 100 / 1000Base-T and two 10 / 100 / 1000 / 2.5GBase-T capture ports.
Page 3
Web interface: Go to menu ‘Settings’ -> ‘Administration’ and click on ‘Reset system configuration’ . All settings including the network configuration will be reset to factory default. Option B Boot menu: Follow the instructions in section 7. ‘Factory reset‘. Allegro 500 / 510 Installation Guide...
Page 4
Update Information via Email With each release, Allegro Packets will send you an email with release notes and a link to download the update. If you want to be added to this mailing list, please send an email with your serial number (‘Info’ ->...
Need help?
Do you have a question about the Allegro 500 and is the answer not in the manual?
Questions and answers