Headlight On/Off; Batterystatus; Multi-Functional Indication; Set Up Parameters - Ozark Trail 23FR2602YD User Manual

4.4 Headlight ON/OFF

Long Press
second to turn off the headlight.
4.5 Battery Status
100% 80%
WARNING: When the charge is only 5%, you should charge the battery immediately.

4.6 Multi-Functional Indication

Tripdistance
When the display is on, short press
TRIP/ODO/TIME/VOL/Current/Error code.
NOTICE: Error code will show in this area if there is any mistake. Check the troubleshooting
chart for more error information.

4.7 Set Up Parameters

With the display ON, press Plus Button + Minus Button at the same time to enter the
parameter setting interface. You can set the parameters for backlight brightness(1-3 levels),
and ODO reset. Short press Power Button to switch from current parameter setting menu to
other.
Set Up Backlight Brightness
Long press Plus Button + Minus Button together to enter Backlight Brightness setting
interface.
Short press Plus Button or Minus Button to set the parameter value under the current
menu. Level 1
is the brightest.

5. Tech

5.1 Brake

Your Electric Bike is equipped with disc brakes for maximum reliability. Applying hand
pressure to the brake levers will engage the wheel brake to cause friction against the brake disc,
slowing the wheel. The more hand pressure applied to the brake lever, the faster the
Electric Bike will come to a stop.
for 5 seconds to turn on the headlight, Press
50%
Singleridetime
is the darkest, level 2
25%
Voltage Current
button to view the different functions, such as:
15% 5%
Errorcode
is moderate, and level 3
for 1
24