IMPORTANT SAFETY INSTRUCTIONS This lightning flash with arrowhead symbol, within The exclamation point within an equilatereal triangle is an equilateral triangle, is intended to alert the user to intended to alert the user to the presence of important the presence of uninsulated “dangerous voltage” operating and maintenance (servicing) instructions in within the product’s enclosure that may be of sufficient the literature accompanying the appliance.
Page 3
E1152 Parts List 5/17/2010 YS No. Description Qty. YS No. Description Qty. 5447 __3U3 200VAC 10% CAP AXL POLY FLM 5449 __6U8 250VAC 10% CAP AXL POLY FLM 5450 _20U 250VAC 10% CAP AXL POLY FLM 5849 _15U 240V 10%CAP BLK RAD POLYP FLM 5853 _75U 140V 5%CAP BLK AXL POLY FLM 3813 _430UH COIL 18AWG R000 BOBBIN 3764 1300UH COIL 14AWG R280 AIR CORE...
Page 4
W5:A W5.:A W5:B W5.:B To W24 on W5:C W5.:C M1416 PCB W5:D W5.:D Full Range/Bi-Amp W3:D 3407 Full Range/Bi-Amp W4:A W4.:A S1:C W3:C 3407 S1:A W4:B W4.:B W3:B W4:C W4.:C W3:A W4:D W4.:D W6:C W2.:C W2:C W2.:D W2:D THIS PART INSERTED ONLY ON M1440 (N4) W2.:F W2:F S1:D...
Page 5
Pcb Mech X8015 2v00 E1152 M1472 2v00 X8015 2v00 Into Wave Top Assy X8015 2v00 OUTSIDE 5023 R T V R T V 15.W R T V 3543 R T V R T V 4711 R T V R T V R T V R T V 15.W...
Page 6
SEE LAYOUT DIAGRAM X8015 PCB HISTORY MODEL(S):- M1472 PRODUCTION NOTES N4/E502 DATE VER# DESCRIPTION OF CHANGE May 2009 1.00p0 First Prototype June 2009 1.00p1 Second Prototype; Added 1/4" for Elite, value changes JULY 2009 1V00 First Production Issue 1. RTV MUST BE ADDED TO R3 AND R5 BEFORE THEY 20-JAN-2010 2V00 PC7943: Add material under W1, W2, W3.
Page 7
140VAC 75uF W6:D 4 W6:A W6:C 4 W6:B M1416 PCB_DATABASE_HISTORY MODEL(S):- DATE VER# DESCRIPTION OF CHANGE 11-FEB-2009 1.00 FIRST DESIGN 26-FEB-2009 2.00 ADD #3538 TO THE BOARD Product Product Sheet1 Sheet1 PCB# PCB# M1416 M1416 Sheet Sheet Date: Date: Thu Feb 26, 2009 Thu Feb 26, 2009 Rev: Rev:...
Page 9
SEE LAYOUT DIAGRAM M1416 PCB_DATABASE_HISTORY MODEL(S):- C4/E1152 DATE VER# DESCRIPTION OF CHANGE M1416 PRODUCTION NOTES 11-FEB-2009 1.00 FIRST DESIGN 26-FEB-2009 2.00 ADD #3538 TO THE BOARD 1. LITTLE BIT OF RTV UNDER C1 AND L1 AND PUSH COIL AND CAP CLOSE TOGETHER AND MAKE SURE THE COIL IS WITHIN THE BOX LEGEND.
Need help?
Do you have a question about the E1152 and is the answer not in the manual?
Questions and answers