RaceAmerica Stopwatch Display Timer PRODUCT OVERVIEW AVAILABLE OPTIONS The Stopwatch Display Timer series of Cabling options: digital displays (4532SC, 6532SC, 4832SC & Up to 100’ for Push-button 6832SC) are microprocessor controlled systems 6501A AC Adapter based upon the 7-segment format display digit 6076A Heavy Duty Carry Case (for 6832SC) using the latest technology Ultra-Bright LEDs.
A display stand (7606B) Power can be supplied to the display from an is also available from RaceAmerica to hang the optional internal battery. The On/Off switch on the display at a good viewing level 40” above ground bottom of the display operates the internal battery level.
RaceAmerica Stopwatch Display Timer be blank. The charger LED shows Red when COUNT UP CONFIG charging and Green when completely charged. The charger may remain connected to the display Power up while pressing the button (press/ hold) and the display will show [ConFiG] (four when not in use;...
RaceAmerica Stopwatch Display Timer until the screen blanks and the last count-down starting point saved will display as [MM:SS]. If CLOCK MODE starting from the same point, press/hold to move to brightness settings. If you wish to change The time is set on the display and then enabled by one last press of the button;...
SUPPORT AGREEMENTS Support agreements are available from RaceAmerica providing Telephone Assistance on technical issues and operational questions, repair and/or replacement of hardware failures, Software and Firmware updates and bug reporting. Contact RaceAmerica for more information and pricing of Support Agreements.
RaceAmerica Stopwatch Display Timer DISPLAY STAND ASSEMBLY INSTRUCTIONS This assembly instruction is intended for use with six digit 5/8 inch and four digit 8 inch digital displays. Suspension Arms 7606B Stand Kit Contents Pipe section 2 - Suspension Stand Arms with ‘J’ hooks...
RaceAmerica Stopwatch Display Timer REVISION HISTORY A - Original release B - Add four-digit models and Clock mode C - New logo, minor grammer D - Add internal battery models E - Correct 4 digit stopwatch display in chart pg 5 to xxx.x F - Add HH:MM:SS and HH:MM Count Up formats G - Correct mm:ss to 99:59 in count up mode (s/w rev A.2), 7606B stand...
Need help?
Do you have a question about the 4532SC and is the answer not in the manual?
Questions and answers