Summary of Contents for AIRTEQ AirCheq Touch Essential
Page 1
Your AirCheq Touch Screen Detector comes with a Essential / Base / Pro 2 year warranty from date of purchase. If you have any problems of installing or programming you AirCheq Touch Screen Detector, call our dedicated technical support team, who will be more than happy to help.
Page 2
Visit support.airteq.eu for more manuals and support.
Page 3
Main feature Temperature format 20-21 Home screen display Backlight Outline dimension Standby screen Con guration settings 10-11 Lock 23-24 First use of the device Co2 set limitation 24-25 Wi settings Reset co2 to factory settings Operation of home screen Co2 auto base line setting Power on/o Co2 sensor calibration Setup...
Page 7
First use of the device Wi Settings Place the device in a well ventilated room or outside. Click the Airteq button on the homescreen Wait at least 10 minutes. Click on the network settings Reset the co2 to factory settings.
Page 9
7000 measurements Make sure the date and time is correct and the sensor is connected to wi . For this function the sensor needs to be set on the right time and date. This can be done automatically by connecting the sensor with your wi network.
Page 19
Open/WEP/WPA/WPA2-personal (TKIP and AES) Network Wi-Fi router with internet access Protocol TCP-Protocol to communicate with AirTeq Server Port TCP port 25050, Port 1883 has to be open Mac address The ID of the sensor can be found on the box or in the settings.
Need help?
Do you have a question about the AirCheq Touch Essential and is the answer not in the manual?
Questions and answers