Britax MARATHON CLASSIC User Manual page 29

5 Verify that the vehicle belt is not twisted, is
routed under the LATCH bars, then buckle
(Fig. B).
6 Push the child seat firmly into the vehicle seat
while removing slack from the vehicle belt
(Fig. D).
7 Attach the Versa-Tether
designated tether anchor (if available
according to the vehicle owner's manual)
for the chosen seating position. Remove
all slack from the tether to secure. Store
excess webbing in the tether pouch. See
pages 29 – 32.
8 Verify that the vehicle belt is tight, locked and
the child seat is secure.
• The child seat is secure when it cannot be
moved front-to-back or side-to-side more than 1
in. (2.5 cm) at the belt path. If the child seat is not
secure, repeat this procedure or use an alternate
seating location.
WARNING!
with a non-locking, two-point Emergency
Locking Retractor (ELR) vehicle belt.
Installation: Forward-Facing
hook to the
®
Do not use this seat
C
d
27