Advertisement
Quick Links
Cable Lock Bracket - Headphone Stand (NCBRKT-C1)
1
Place a charged and coded
OneKEY into the IR port on the
Cable Lock and press the button
to unlock the Cable Lock.
5
Close the brackets around the
Cable Lock and headphone
display post.
IR Port
2
Place one of the brackets around
the Cable Lock. Ensure that the IR
port is facing out from the bracket.
6
Insert the 2 provided nuts into the
openings in the left side bracket.
3
Fit the thinner channel of the
bracket around the post of the
headphone display.
7a
Holding the nut in place, insert
one of the provided screws
through the hole on the right side
bracket.
1
4
Hook the 2 brackets together.
7b
Use a TT20 bit to tighten the
screw into the nut.
For technical assistance call
NA / LATAM // 704.752.6513 • 888.55.INVUE
EMEA // +31.23.8900150
APAC // +852.3127.6811
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for inVue NCBRKT-C1
Summary of Contents for inVue NCBRKT-C1
- Page 1 Cable Lock Bracket - Headphone Stand (NCBRKT-C1) IR Port Place a charged and coded Place one of the brackets around Fit the thinner channel of the Hook the 2 brackets together. OneKEY into the IR port on the the Cable Lock. Ensure that the IR...
- Page 2 Cable Lock Bracket - Headphone Stand (NCBRKT-C1) Repeat for the other screw. Place the headphones onto the Loop the Cable Lock tether display. around the headphone band and insert the tether into the Cable Lock. The Cable Lock will chirp in confirmation.
Need help?
Do you have a question about the NCBRKT-C1 and is the answer not in the manual?
Questions and answers