inVue LIVE OnePOD Quick Release Series Installation Manual

Sensors & brackets
Table of Contents

Advertisement

Quick Links

LIVE OnePOD Quick Release Sensors & Brackets Installation
IMPORTANT:
Ensure that the LoRa
!
Gateway and the InVue
Alarm Nodes have been
configured with the InVue
LIVE app before beginning
the installation. The stand
should NOT be powered at
this point.
1
If not already installed on your
smart phone or tablet, download
the InVue LIVE Display app from
the Google Play store or iOS app
store. Log in using the information
provided by your manager or
admin.
If you already have login
information for the app proceed
to the next step.
Otherwise, see below.

First time setup

Before using the app, users and site
information must be set up within the InVue
LIVE web portal.
This should be completed by a manager or
admin using the information sent by InVue
Customer Service.
If you are a manager or admin and have not
received this information via email from InVue
Customer service, please submit a service
request.
2
With the InVue LIVE Display app
open on your smart phone or
tablet, press the "Add or Scan
InVue Device" button.

LIVE OnePOD QR Bracket Arm Sizing Guide

Check the table below to ensure your bracket arm kit is correctly sized for your device.
Order Code
Description
DLH291
HH Brackets - Medium
DLH292
HH Brackets - Large
DLT291
Tablet Brackets - Small
DLT292
Tablet Brackets - Medium
DLT293
Tablet Brackets - Large
DLT294
Tablet Brackets - Extra Large
3
Use the smart phone or tablet's
camera to scan the barcode on
the sensor (the Device ID can also
be entered manually). Follow the
prompts in the app to set up the
sensor.
Note: App may display "install
pending" at this point.
1
Width Range
Height Range
63.5mm - 84.9mm
133mm - 157mm
63.5mm - 84.9mm
158mm - 182mm
120.0mm - 141.5mm
197mm - 222mm
154.0mm - 175.5mm
236mm - 259mm
178.7mm - 200.2mm
264mm - 288mm
204.3mm - 225.8mm
263mm - 288mm
4
Once the enrollment process
is complete, the app will show
this screen. Select "OK, GOT
IT." to return to the LIVE Display
dashboard.
For technical assistance call
NA / LATAM // 704.752.6513 • 888.55.INVUE
EMEA // +31.23.8900150
APAC // +852.3127.6811

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LIVE OnePOD Quick Release Series and is the answer not in the manual?

Questions and answers

Summary of Contents for inVue LIVE OnePOD Quick Release Series

  • Page 1 DLH292 HH Brackets - Large 63.5mm - 84.9mm 158mm - 182mm Before using the app, users and site information must be set up within the InVue DLT291 Tablet Brackets - Small 120.0mm - 141.5mm 197mm - 222mm LIVE web portal.
  • Page 2 Tip: It helps to angle the arm beginning of this guide. upwards first. For technical assistance call NA / LATAM // 704.752.6513 • 888.55.INVUE EMEA // +31.23.8900150 APAC // +852.3127.6811...
  • Page 3 TT20 not slide out freely (or if it is TOO bit. loose) loosen the screws and adjust the side arms as needed For technical assistance call NA / LATAM // 704.752.6513 • 888.55.INVUE EMEA // +31.23.8900150 APAC // +852.3127.6811...
  • Page 4 *This screen may look different depending on your setup. present for the arm to release. For technical assistance call NA / LATAM // 704.752.6513 • 888.55.INVUE EMEA // +31.23.8900150 APAC // +852.3127.6811...
  • Page 5 • Is the red line fully hidden (see step 13b)? For technical assistance call NA / LATAM // 704.752.6513 • 888.55.INVUE EMEA // +31.23.8900150 APAC // +852.3127.6811...
  • Page 6 (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. SD0909 Rev3 07/31/23 For technical assistance call NA / LATAM // 704.752.6513 • 888.55.INVUE EMEA // +31.23.8900150 APAC // +852.3127.6811...

This manual is also suitable for:

Live onepod qr seriesDlh291Dlh292Dlt291Dlt292Dlt293 ... Show all

Table of Contents