Page 1
Standard Picnic Table Assembly Instructions Please note it is critical that assembly instructions are followed step by step. Failure to do so may result in components not aligning as intended. Drill Guide: Lay out your 5 boards, with 3 designated for the tabletop and 2 for the seats. Place the drill guide on one of the seat boards and mark the 4 drill holes.
Page 2
Assembly Step 2: Take your long bolt and place it through the holes in each of your top boards. Flip the board so the bolts are pointing up. Assembly Step 3: Place your center bracket. The holes will line up with the long bolts in the center of the table.
Page 3
Assembly Step 5: Attach your cross braces to each side using your split washer, short bolt, and nut. *Repeat on opposite end. Assembly Step 6: Flip the table right side up. *Ensure table is flipped safely. A 2-person lift may be required. Always flip the table away from you. Get your seat boards ready.
Page 4
Customer service is available Monday-Friday, 8:00am - 4:30pm EST, at 716-483-3406 or live chat at www.jamestownadvanced.com. If any parts are missing, please contact us. Warning: The Jamestown Advanced Products tables are very heavy. Turning the table over in an unsafe manner may cause injury. Exercise extreme caution when turning over. Printed in U.S.A...
Need help?
Do you have a question about the AZNPT001 and is the answer not in the manual?
Questions and answers