Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bosch PRS9A6H40A
Summary of Contents for Bosch PRS9A6H40A
- Page 1 Built-in gas hob PRS9A6H40A User manual and installation instructions [en]...
- Page 2 PRS9A.H4.A Component Pan support Control knob Economy burner 3.20 / 4.00 MJ Standard-output burner 5.50 / 6.85 MJ High-output burner 9.70 / 11.00 MJ Dual-wok multi-crown 16.50 / 19.50 MJ burner The images shown in these instructions are for guid- ance only.
- Page 3 Safety en Further information and explanations are available online: Table of contents ¡ Keep the instruction manual and the product information safe for future refer- ence or for the next owner. INFORMATION FOR USE ¡ Do not connect the appliance if it has been Safety .............. 3 damaged in transit.
- Page 4 en Safety been instructed on how to use the appliance ¡ Before installing the appliance, check that safely and have understood the resulting the local conditions of the supplier are dangers. compatible with the appliance settings spe- Do not let children play with the appliance. cified on the rating plate (type of gas and Children must not perform cleaning or user pressure, power, voltage).
- Page 5 Safety en Escaping gas may ignite. WARNING ‒ Risk of poisoning! ▶ If the burner does not ignite after Using the gas cooking appliance leads to a 10 seconds, turn the control knob to the build-up of heat, moisture and combustion "Off" position and open the door or window products in the room where the appliance is in the room.
- Page 6 en Safety ▶ Never pull on the power cord to unplug the Cookware that is not the right size, or that is appliance. Always unplug the appliance at damaged or incorrectly positioned may cause the mains. serious injuries. ▶ If the appliance or the power cord is dam- ▶...
- Page 7 Installation instructions en 2 Installation instructions Observe this information when installing the appliance. 2.1 Statutory requirements This installation must conform with the following: ¡ Manufacturer’s Installation instructions ¡ Local Gas Fitting Regulations ¡ Municipal Building Codes ¡ Refer to AS/NZS 5601.1 for Gas Installations ¡...
- Page 8 en Installation instructions 2.4 Shield If the base of the hotplate can be touched, fit a protecting shield. ¡ The shield must be at least 10 mm from the lowest Screw the brackets supplied into the specified posi- part of the hotplate and must be capable of with- tion so that they can turn freely.
- Page 9 Installation instructions en Turn the brackets and tighten them fully. Wiring diagram Observe the wiring diagram. The position of the brackets depends on the work- top thickness. Switch 2.6 Electrical connection Blue wire Follow the instructions for electrical connection. Brown wire ¡ An electrical 10 amp socket needs to be within 1 m of the hotplate to allow electrical connection.
- Page 10 en Installation instructions Gas connection R 1/2 Before leaving Fit the seal and the connecting piece R 1/2 to the It should be expressly noted that we cannot accept any gas connection on the appliance. liability for direct or indirect damage caused by wrong Fit regulator (N.
- Page 11 Installation instructions en Adjusting the taps Adjust the bypass screws: A: For ULPG, the bypass screws must be ‒ Requirement: The upper part of the appliance and the tightened properly. circuit board are removed. B: For Natural Gas, the bypass screws must fin- ‒...
- Page 12 en Preventing material damage 3 Preventing material damage If a control knob is in the wrong position, this could ATTENTION! lead to malfunctions. Heat can cause damage to adjacent appliances or kit- Always turn the control knob to the "Off" position ▶...
- Page 13 Familiarising yourself with your appliance en The controls light up when you are in a position that dif- Dual-wok multi-crown burner fers from the symbol position. With the dual-wok multi-crown burner, you can regulate the inner and outer flames independently of each other. Burner assigned to the control knob.
- Page 14 If the appliance is connected to Home Connect, some More information on the availability of additional func- functions may be available with a software update. tions can be found on the website www.bosch- home.com 8 Accessories You can buy accessories from the after-sales service, You can find out which accessories are available for from specialist retailers or online.
- Page 15 Basic operation en Accessories Description Additional wok grid ¡ Only use on the multi-crown burner. ¡ Always use for cookware with a rounded base. ¡ Recommended in order to extend the ser- vice life of the appliance. Additional espresso maker ¡ Only use on the burner with the lowest grid power setting.
- Page 16 en Cookware Switching the timer on 9.5 Normal behaviour during operation Press . This behaviour is normal for the appliance: or to select the required time. ¡ Slight hissing noise from the ignited burner. Touch to confirm. ¡ Release of odours when using the appliance for the a The time starts to elapse.
- Page 17 Home Connect en ¡ To reduce the cooking time: Power Preparing meals – Use a pressure cooker to cook creams and level pulses. If you are using a pressure cooker, follow ¡ Continuing the cooking process: Pasta, the manufacturer's instructions. soups, creams, paella, pulses, rice pud- –...
- Page 18 en Hob-based hood control As soon as a software update is available, you will be 12.3 Wi-Fi symbol informed via the Home Connect app and will be able to The Wi-Fi indicator on the control panel changes ac- start the software update via the app. Once the update cording to the status and quality of the connection and has been successfully downloaded, you can start in- the availability of the Home Connect server.
- Page 19 Do not use a knife or sharp objects to clean the ▶ You can obtain suitable cleaning products from after- connection between the glass and the burner pan- sales service or the online shop www.bosch- els, the metal frames or the glass/aluminium plates home.com. for cleaning.
- Page 20 en Troubleshooting Part Recommended cleaning method Notes Pan supports Cleaning by hand: ¡ Carefully remove the pan supports. ¡ Scrub with a non-metallic ¡ Carefully clean the area around the rubber pads. If brush or a non-scratching the rubber pads come loose, the pan support may scouring sponge and soapy scratch the hob.
- Page 21 Troubleshooting en Fault Cause and troubleshooting Automatic ignition is The appliance is not earthed or has not been connected correctly, or the earth cable is not working. damaged. Contact an electrician. ▶ The burner flame is The burner parts are positioned incorrectly. not uniform.
- Page 22 en Service 16 Service DO NOT MODIFY THIS APPLIANCE. Only authorized ¡ Sooting up of cooking utensils. personnel from the Service Centre are qualified to work ¡ Burners not lighting properly. on the appliance. ¡ Gas valves, which are difficult to turn. Any of the following are considered to be abnormal In case the appliance fails to operate correctly, contact operation and may require servicing:...
- Page 23 BSH Hausgeräte GmbH hereby declares that the appli- A detailed RED Declaration of Conformity can be found ance with Home Connect functionality conforms to the online at www.bosch-home.com among the additional essential requirements and other relevant provisions of documents on the product page for your appliance.
- Page 24 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
Need help?
Do you have a question about the PRS9A6H40A and is the answer not in the manual?
Questions and answers