19.6 in / 500mm 19.6 in / 500mm Depth 19.6 in / 500mm 19.6 in / 500mm Abatement Technologies Use Weight 87 lbs / 39.5 kg 100 lbs / 45.5kg Specifications are subject to change without notice. Some values are approximate.
Inspect filter. Look for accumulated dust and dirt that would restrict airflow Abatement Dehumidifiers are used by professionals for the drying out of wet through the filter into the unit. If any is visible, vacuum out the debris. Do materials such as carpets, carpet cushions, floors, walls, building contents and not wash the filter, as it will reduce the effectiveness of the electrostatic more.
The machine will revert to STANDBY MODE but will still be on maximize the unit’s water removal efficiency. Inside the drying chamber, air unless manually turned off. Contact Abatement Technologies for service. should circulate freely. Open interior doors and turn on Air Movers to increase When Er03 error message displays, the dehumidification cycle is still on.
Operating Your Dehumidifier Touch Pad Keys (Cont.): PURGE. Press the PURGE key to empty water from the pump reservoir. Place the dehumidifier in upright position During normal operation, the pump purges automatically whenever the If the dehumidifier has been laid down in a horizontal position for any time over reservoir is full.
Page 6
How to Use the Touch Pad Control Panel Touch Pad Keys: ON/OFF. Press the ON/OFF key to turn the machine on or off. Touch pad control panel includes When the machine is turned on, it comes on in STANDBY MODE. one LCD Display, one Indicator The red indicator light and LCD light up.
Need help?
Do you have a question about the AQUATRAP AT250RS and is the answer not in the manual?
Questions and answers