WARNING: This product can be dangerous and cause serious injury or death to the operator or others. Be careful and use the product correctly. Product description The Husqvarna WT 10 MP is a pressurized water tank where the pressure is created by a manual pump device. Intended use Water pressure tanks WT 10MP are designed for supplying drills, concrete saws, grinders, etc.
Page 6
ENGLISH Safety Only trained, healthy and rested people may work with the device. You should not be under the influence of alcohol, drugs or medication. Children and adolescents must not use the device Keep the spraying devices safe from access to children. Take precautions to prevent hazardous substances from being misused.
Page 7
Scope of delivery Tank [1] with pump [2], hose [4], and Instructions for Use [5]. (Fig. 1) Technical data Type of device WT 10MP Max. filling amount 10 l (2.64 gal) Total contents 12.5 l (3.3 gal) Max. spraying pressure 3 bar (43.5 psi)
Page 8
ENGLISH 8. Create the desired pressure in the tank. (Fig. 11) The maximum pressure should not exceed 3 bar (43,5 psi) (red line on the piston pressure gauge, Fig. 11). If the maximum pressure is exceeded, the safety valve will engage and release the excess pressure.
ENGLISH Care and maintenance Observe the instructions in the section entitled “Safety”. After using the device 50 times or at least once a year: • Unscrew the pump [2] from the tank. (Fig. 7) • Dismantle the pump [2]. a) Unlock the piston rod with handle [13]. (Fig. 17) b) Pull the piston rod with handle [13] out of the cylinder tube up to the stop and turn it counterclockwise (Fig.
ENGLISH EU Declaration of Conformity We, Husqvarna AB, SE 561 82 Huskvarna, SWEDEN, Tel. +46 36 146500 declare on our sole responsibility that the product: Description Pressurized Water Tank Brand HUSQVARNA Type / Model WT 10 MP Identification Manufacture dating from 2022 and onwards, in form Month and Year, MMYY...
Page 11
ENGLISH UK Declaration of Conformity We, Husqvarna AB, SE 561 82 Huskvarna, SWEDEN, Tel. +46 36 146500 declare on our sole responsibility that the product: Description Pressurized Water Tank Brand HUSQVARNA Type / Model WT 10 MP Identification Manufacture dating from 2022 and onwards, in form Month and Year, MMYY...
VAROITUS: tämä tuote voi olla vaarallinen ja aiheuttaa vakavia vammoja tai käyttä- jän tai muiden henkilöiden kuoleman. Toimi varovasti ja käytä laitetta oikein. Tuotteen kuvaus Husqvarna WT 10MP on vesipainesäiliö, jossa paine luodaan manuaalisella pumpulla. Käyttötarkoitus Vesipainesäiliöt WT 10MP on tarkoitettu veden syöttämiseen pölyn sitomiseksi porille, betonisahoille, hiontakoneille jne.
Page 13
SUOMI Turvallisuus Laitteella saavat työskennellä ainoastaan koulutetut, terveet ja levänneet henki- löt.He eivät saa olla alkoholin, huumausaineiden tai lääkeaineiden vaikutuksen alaisia. Lapset ja nuoret eivät saa käyttää laitetta. Säilytä laite poissa lasten ulottuvilta. Estä soveltuvin toimin väärinkäyttö, jos laitteessa käytetään vaarallisia aineita. →...
SUOMI 7. Paina kahvallinen männänvarsi [13] alas ja kierrä vartta myötäpäivään. ► Kahvallinen männänvarsi on vapautettu lukituksesta. (Kuva 10) 8. Luo haluamasi paine säiliössä. (Kuva 11) Maksimipaineen ei tulisi ylittää 3 baaria (punainen viiva mäntäpainemittarissa, Kuva 11). Jos maksimipaine ylittyy, varoventtiili reagoi ja päästää ylipaineen pois. 9.
SUOMI Huolto ja hoito Ota huomioon luvussa „Turvallisuus“ annetut ohjeet. 50 käyttökerran jälkeen, vähintään kerran vuodessa: • Kierrä pumppu [2] irti säiliöstä. (Kuva 7) • Pura pumppu [2] osiin. a) Vapauta kahvallinen männänvarsi [13] lukituksesta. (Kuva 17) b) Vedä kahvallinen männänvarsi [13] rajoittimeen asti ulos sylinteriputkesta ja kierrä vartta vastapäivään.
SUOMI EU-vaatimustenmukaisuusvakuutus Me, Husqvarna AB, SE 561 82 Huskvarna, RUOTSI, Puh. +46 36 146500 vakuutamme, että tuote: Kuvaus Painevesisäiliö Merkki HUSQVARNA Tyyppi/malli WT 10 MP Merkintä Valmistus 2022 lähtien, muodossa kuukausi ja vuosi, MMYY vastaa täysin seuraavia EU-direktiivejä ja -asetuksia:...
Need help?
Do you have a question about the WT 10MP and is the answer not in the manual?
Questions and answers