Preparing The Tea Maker For Use - Breville BTM800 Instruction Booklet

BEFORE FIRST USE
PREPARING ThE TEA MAKER
FOR USE
In order to remove any dust or protective
residues from the manufacturing process, it
is recommended to run a boiling cycle then
discard the water.
Remove and safely discard any packing
1.
material, promotional labels and tape
from the Tea Maker.
Remove the Jug Lid then remove the
2.
Tea Basket from the magnetic post
within the Glass Jug. Wash the Jug
Lid, Tea Basket, Basket Lid and Tea
Scoop in warm soapy water with a soft
sponge, rinse and dry thoroughly.
NEVER IMMERSE ThE BASE OF
!
ThE GLASS JUG, ThE POwER
BASE, POwER CORd OR
POwER PLUG IN wATER OR
ALLOw MOISTURE TO COME IN
CONTACT wITh ThESE PARTS.
Place the Power Base on a flat, dry
3.
surface.
Without the Tea Basket in place, fill the
4.
Glass Jug to the water maximum mark
(1500mL WATeR MAX) and place on
the Power Base. Securely fit the Jug Lid
onto the Glass Jug.
NEVER FILL ThE GLASS JUG
!
wITh ChILLEd wATER. ALLOw
ThE TEA MAKER TO COOL
BEFORE REFILLING.
FILLING PAST ThE 'MAx' LINE
!
MAY RESULT IN SERIOUS BURNS
OR INJURIES AS A RESULT OF
OVERFLOwING hOT OR BOILING
wATER. FILLING BELOw ThE
'MIN' LINE wILL RESULT IN ThE
TEA MAKER SwITChING OFF
BEFORE ThE wATER hAS BOILEd
OR REAChEd ThE SELECTEd
TEMPERATURE.
Unwind the power cord completely and
5.
insert the power plug into a grounded
wall outlet.
The LCd screen will illuminate with the
6.
default brew temperature and brew
time display.
Press the left ARROW UP button
7.
until the LCd screen displays 100°C.
The 'Custom' Led will automatically
illuminate.
Press the HOT WATeR|Cancel button
8.
to start the cycle. The button surround
will illuminate and the LCd screen will
display 'ON' and the real-time heating
progress in increments of 5°C.
Once the water reaches 100°C, the
9.
tea alert will sound three times and
the HOT WATeR|Cancel button
surround will cease to illuminate.
discard the water. The Tea Maker is
10.
now ready to use.
15