1. Manuals
  2. Brands
  3. U.S. Solid Manuals
  4. Power Tool
  5. USS-LRW00005
  6. User manual

U.S. Solid USS-LRW00005 User Manual

Label rewinder
Hide thumbs

Advertisement

Table of Contents

LABEL REWINDER
User Manual
(Manual No. 6559)
Model: USS-LRW00005/07/08/15
This manual should be made available to all users of this
equipment. For best results, and for maximum durability of
the equipment, carefully read and follow all instructions.
Version 3.0 ©202412

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the USS-LRW00005 and is the answer not in the manual?

Questions and answers

Related Manuals for U.S. Solid USS-LRW00005

Summary of Contents for U.S. Solid USS-LRW00005

  • Page 1 LABEL REWINDER User Manual (Manual No. 6559) Model: USS-LRW00005/07/08/15 This manual should be made available to all users of this equipment. For best results, and for maximum durability of the equipment, carefully read and follow all instructions. Version 3.0 ©202412...

  • Page 2: Table Of Contents

    Table of Contents I. Product Specifications II. Package Lists III. Assembling Plug IV. Switch Introduction V. Operating Instructions VI. Notice VII. Warranty...

  • Page 3: Product Specifications

    I. Product Specifications 3.9 inches 4.7 inches 5.9 inches 5.9 inches MODEL LRW00007 LRW00005 LRW00008 LRW00015 (100 mm) (120 mm) (150 mm) (150 mm) Max. Label Width 7.2 inches 8.6 inches 8.6 inches 11.8 inches (185 mm) (220 mm) (220 mm) (300 mm) Max.

  • Page 4: Assembling Plug

    III. Assembling Plug The power cord and plug are packaged separately. Please assemble them as shown in the figure above. Install part ② onto part ①, then press part② down and rotate it anticlockwise. IV. Switch Introduction This rewinder is bidirectional, meaning it can be operated in either direction.

  • Page 5: Operating Instructions

    V. Operating Instructions Lock Levers Front Flange Plate Rear Flange Plate Core Fingers Adjustable Paper Guide 1. Loosen the three black Lock Levers on the rear side of the Core REWINDING LABELS Holder Flange Plate. 2. Grasp the Front Flange Plate with one hand and the Rear Flange Plate with the other.
  • Page 6 6. Now press the other two Locking Levers into the LOCK position. 7. Slide the cardboard core all the way up against the Flange Plate. 8. Pull the label web to the cardboard core and use a piece of tape to secure it in place.

  • Page 7: Warranty

    Within 30 days from the date of delivery, U.S. Solid will either work with you to get your product working with the use of replacement parts, replace the product after receiving the returned defective machine, or accept a return for a full refund.

This manual is also suitable for:

Uss-lrw00007Uss-lrw00008Uss-lrw00015

Table of Contents