Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. 13w 2-in-1 Gen 3
  6. Hardware maintenance manual
Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual

Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual

Hide thumbs Also See for 13w 2-in-1 Gen 3:
Table of Contents

Advertisement

Quick Links

Download this manual
Lenovo 13w 2-in-1 Gen 3
Hardware Maintenance Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 13w 2-in-1 Gen 3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lenovo 13w 2-in-1 Gen 3

Summary of Contents for Lenovo 13w 2-in-1 Gen 3

  • Page 1 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 2 First Edition (March 2025) © Copyright Lenovo 2025. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-...

  • Page 3: Table Of Contents

    Locating FRUs and CRUs ... Lenovo system board self repair tool ..Major FRUs and CRUs ..
  • Page 4 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 5: About This Manual

    About this manual This manual contains service and reference information for the following products: Product name Machine type (MT) Lenovo 13w 2-in-1 Gen 3 83M9 and 83MA Use this manual along with the advanced diagnostic tests to troubleshoot problems. Important: •...
  • Page 6 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 7: Chapter 1. Safety Information

    • Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. Electrical safety Observe the following rules when working on electrical equipment. © Copyright Lenovo 2025...
  • Page 8 This practice ensures correct grounding of the units. • If an electrical accident occurs: – Use caution; do not become a victim yourself. – Switch off power. – Send another person to get medical aid. Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 9: Safety Inspection Guide

    4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-ThinkPad / non-Lenovo alterations. Use good judgment as to the safety of any non-ThinkPad / non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

  • Page 10: Grounding Requirements

    The safety notices in this section are provided in the following languages: • English • Arabic • Brazilian Portuguese • French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese Note: DANGER Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 11 DANGER DANGER DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 12 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 13 PERIGO PERIGO PERIGO Chapter 1 Safety information...
  • Page 14 PERIGO PERIGO PERIGO PERIGO PERIGO DANGER DANGER Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 15 DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 16 DANGER VORSICHT VORSICHT VORSICHT VORSICHT Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 17 VORSICHT VORSICHT VORSICHT VORSICHT Chapter 1 Safety information...
  • Page 18 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 19 Chapter 1 Safety information...
  • Page 20 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 21 Chapter 1 Safety information...
  • Page 22 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 23 Chapter 1 Safety information...
  • Page 24 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 25: Chapter 2. General Checkout

    • LCD panel cracked from the application of excessive force or from being dropped • Scratched (cosmetic) parts • Distortion, deformation, or discoloration of the cosmetic parts • Plastic parts, latches, pins, or connectors that have been cracked or broken by excessive force © Copyright Lenovo 2025...

  • Page 26: Checking The Ac Power Adapter

    Checking the battery and operational charging This system supports only batteries specially designed for this specific system and manufactured by Lenovo or an authorized manufacturer. The system does not support unauthorized batteries or batteries designed for other systems.
  • Page 27 Step 2. Perform operational charging. Click the battery status icon in the Windows notification area to display detailed battery information. If it indicates that the battery is not charging, replace the battery. Step 3. Check the battery status again. If the same error still exists, replace the system board. Chapter 2 General checkout...
  • Page 28 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 29: Chapter 3. Locations

    Chapter 3. Locations Locating computer controls and connectors Front view Description Description Item Item Microphone Infrared camera / Camera Webcam privacy shutter Touch screen Power button with / without fingerprint Trackpad reader * for selected models © Copyright Lenovo 2025...
  • Page 30 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 31: Side View

    Side view Description Description Item Item ® USB-C power connector (USB HDMI™ connector 10Gbps) Lenovo Integrated Pen Audio connector USB-A connector (USB 5Gbps) Security-lock slot * for selected models Chapter 3 Locations...

  • Page 32: Bottom View

    Bottom view Description Description Item Item Keyboard drainage hole Speaker Keyboard drainage hole Drain out liquid from your computer if you accidentally spill liquid on the keyboard. Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 33: Locating Frus And Crus

    Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual can be found at https://support.lenovo.com...

  • Page 34: Major Frus And Crus

    Major FRUs and CRUs Table 1. Major FRUs and CRUs FRU description Self-service Optional-service Base cover assembly Heat sink Thermal fan Right I/O bracket* Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 35 Speaker assembly Trackpad waterproof mylar Lenovo Integrated Pen* Pen dummy* Lenovo Integrated Pen charge board* Lenovo Integrated Pen charge board cable* Fingerprint reader cable* Power button with fingerprint reader and its bracket* Power button with bracket* Trackpad cable System board (for models with non-replaceable USB-C module)

  • Page 36: Lcd Frus And Crus

    Camera-and-microphone module* Microphone rubbers LCD cover assembly LCD hinges LCD and camera cable * for selected models Note: Depending on the computer model, your computer might look different from the illustration above. Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 37: Miscellaneous Parts

    • Trackpad waterproof mylar kit • Microphone rubber kit • Aluminium foil for camera kit Label kit: • Label • Spec Looking up FRU information For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to: https://support.lenovo.com/partslookup Chapter 3 Locations...
  • Page 38 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 39: Chapter 4. Fru Replacement Notices

    • Keep the screw kit in your tool bag. For the part number of the screw kit, go to: https://support.lenovo.com/partslookup Tighten screws as follows: • Plastic to plastic Turn an additional angle of 90 degrees after the screw head touches the surface of the plastic part. © Copyright Lenovo 2025...
  • Page 40 • Ensure that you use the correct screw. It is recommended to use new screws for replacements. If you have a torque screwdriver, tighten all screws firmly to the torque specified in the screw information table for each step. • Ensure torque screwdrivers are calibrated correctly following country specifications. Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 41: Chapter 5. Removing Or Replacing A Fru

    Click Power Options, and then click Choose what the power buttons do on the left pane. Step 3. Click Change settings that are currently unavailable at the top. Step 4. If prompted by User Account Control (UAC), click Yes. © Copyright Lenovo 2025...

  • Page 42: Lenovo Integrated Pen And Pen Dummy (For Selected Models)

    Before you start, read Generic Safety and Compliance Notices Depending on models, your computer might come with a Lenovo Integrated Pen or a pen dummy. For access, do the following: 1. Ensure that your computer is off or in sleep mode. Disconnect the computer from ac power and all connected cables.
  • Page 43 2. Turn off the computer and disconnect the computer from ac power and all connected cables. 3. Close the computer display and turn over the computer. 4. Remove the Lenovo Integrated Pen or pen dummy. See “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36.

  • Page 44: Applying Labels To The Base Cover Assembly

    For the labels that are not shipped with the new base cover assembly, peel them from the old base cover assembly, and adhere them to the new one. Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 45: Built-In Battery

    Batteries supplied by Lenovo for use with your product have been tested for compatibility and should only be replaced with approved parts. A battery other than the one specified by Lenovo, or a disassembled or modified battery may not be covered by warranty.
  • Page 46 • If the battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substances. Lenovo recommends you use a qualified repair technician or ensure that you carefully follow all instructions provided by Lenovo. The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local laws and regulations.
  • Page 47 Step 2. Before installing the built-in battery, thoroughly check the battery compartment and ensure that there are no foreign or sharp objects that could cause damage to the battery. Step 3. Install the built-in battery as shown below. Chapter 5 Removing or replacing a FRU...

  • Page 48: M.2 Solid-State Drive And M.2 Solid-State Drive Bracket

    • Do not subject the M.2 solid-state drive to physical shocks or vibration. Put the M.2 solid-state drive on a soft material, such as cloth, to absorb physical shocks. For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Tool needed: Phillips-head screwdriver Step 1.

  • Page 49: Wireless Lan Module

    Before you start, read Generic Safety and Compliance Notices For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Tool needed: Phillips-head screwdriver Step 1.

  • Page 50: Memory Module

    Before you start, read Generic Safety and Compliance Notices For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Step 1. Remove the memory module as shown below.

  • Page 51: Replaceable Usb-C Module And Replaceable Usb-C Module Bracket (For Selected Models)

    CRUable Non-CRUable For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Tool needed: Phillips-head screwdriver Attention: Do not touch the contact edge of the replaceable USB-C module. Otherwise, the replaceable USB-C module might get damaged.
  • Page 52 Remove the replaceable USB-C module and its bracket as shown below. Step 2. Install the replaceable USB-C module and its bracket as shown below. When installing, ensure that the replaceable USB-C module is attached firmly. Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 53: Heat Sink

    Before you start, read Generic Safety and Compliance Notices For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Tool needed: Phillips-head screwdriver Step 1.

  • Page 54: Thermal Fan

    Before you start, read Generic Safety and Compliance Notices For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Tool needed: Phillips-head screwdriver Step 1.

  • Page 55: Coin-Cell Battery

    Step 2. Install the thermal fan in reverse order. When installing: • Ensure that the connector is attached firmly. • Do not press the top of the fan cover and the fan hub. Coin-cell battery Before you start, read Generic Safety and Compliance Notices Chapter 5 Removing or replacing a FRU...

  • Page 56: Lenovo Integrated Pen Charge Board And Cable (For Selected Models)

    DANGER Use only the Lenovo authorized battery specified for the computer. Any other battery could ignite or explode. For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Step 1.

  • Page 57: I/O Brackets

    Before you start, read Generic Safety and Compliance Notices For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Tool needed: Phillips-head screwdriver Step 1.
  • Page 58 Step Screw (quantity) Color Torque M2 × 4 mm, flat-head, nylon-coated (7) Silver 0.181 Nm (1.85 kgf-cm) For models with replaceable USB-C module Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 59: Wireless Lan Antenna Assembly

    Before you start, read Generic Safety and Compliance Notices For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “Built-in battery” on page 39 Step 1.

  • Page 60: Antenna Locations

    • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “Built-in battery” on page 39 • “Lenovo Integrated Pen charge board and cable (for selected models)” on page 50 • “Wireless LAN antenna assembly” on page 53 Step 1.

  • Page 61: System Board

    For models with replaceable USB-C module For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “Built-in battery” on page 39 •...
  • Page 62 • Apply thermal grease on the heat sink if needed. For details, see “Heat sink” on page 47. • Ensure the adhesive side of the thermal pad is attached on the system board if a single-sided adhesive thermal pad is in use with the M.2 solid-state drive. Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...

  • Page 63: For Models With Non-Replaceable Usb-C Module

    For models with non-replaceable USB-C module For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “Built-in battery” on page 39 • “M.2 solid-state drive and M.2 solid-state drive bracket” on page 42 •...

  • Page 64: How To Input The Product Information With Lenovo System Board Self Repair Tool

    • Ensure the adhesive side of the thermal pad is attached on the system board if a single-sided adhesive thermal pad is in use with the M.2 solid-state drive. How to input the product information with Lenovo system board self repair tool...

  • Page 65: Rear Camera-And-Microphone Module And Cable

    Before you start, read Generic Safety and Compliance Notices For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “Built-in battery” on page 39 •...

  • Page 66: Power Button With Or Without Fingerprint Reader

    Before you start, read Generic Safety and Compliance Notices For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “Built-in battery” on page 39 •...
  • Page 67 Step 2. Install the power button with fingerprint reader in reverse order. Chapter 5 Removing or replacing a FRU...

  • Page 68: For Models Without Fingerprint Reader

    Before you start, read Generic Safety and Compliance Notices For access, remove this FRU: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 Tool needed: Phillips-head screwdriver Step 1.

  • Page 69: Lcd Strip Cover

    Step Screw (quantity) Color Torque M 2.5 × 5 mm, flat-head, nylon-coated (4) Silver 0.294 Nm (3.0 kgf-cm) Step 2. Install the LCD unit in reverse order. When installing, ensure that the connector is attached firmly. LCD strip cover Before you start, read Generic Safety and Compliance Notices Chapter 5 Removing or replacing a FRU...

  • Page 70: Touch Module Assembly

    For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “LCD unit” on page 62 Tool needed: Pry tool Step 1. Remove the LCD strip cover as shown below.

  • Page 71: Gravity Sensor Board And Lcd-And-Camera Cable

    Before you start, read Generic Safety and Compliance Notices For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “LCD unit” on page 62 •...

  • Page 72: Camera-And-Microphone Module

    Before you start, read Generic Safety and Compliance Notices For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “LCD unit” on page 62 •...

  • Page 73: Lcd Hinges

    Before you start, read Generic Safety and Compliance Notices For access, remove these FRUs in order: • “Lenovo Integrated Pen and pen dummy (for selected models)” on page 36 • “Base cover assembly” on page 36 • “LCD unit” on page 62 •...

  • Page 74: Lcd Cover Assembly

    • “Heat sink” on page 47 • “Thermal fan” on page 48 • “Coin-cell battery” on page 49 • “Lenovo Integrated Pen charge board and cable (for selected models)” on page 50 • “I/O brackets” on page 51 • “System board” on page 55 •...

  • Page 75: Appendix A. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 76 Trademarks Lenovo, the Lenovo logo, and ThinkPad are trademarks of Lenovo. Microsoft and Windows are trademarks of the Microsoft group of companies. The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. USB-C is a registered trademark of USB Implementers Forum.

  • Page 77: Appendix B. Abbreviation Table

    Electrically Erasable Programmable Read-Only Memory Extensible Firmware Interface Electrostatic discharge Field Replaceable Unit General Announce Variant Integrated circuits Liquid Crystal Display Machine type and model POST Power-on self-test RFID Radio-frequency identification Supervisor password UUID Universally unique identifier © Copyright Lenovo 2025...
  • Page 78 Lenovo 13w 2-in-1 Gen 3 Hardware Maintenance Manual...
  • Page 80 Part Number: SP41Q96422 Printed in China (1P) P/N: SP41Q96422 *1PSP41Q96422*...

This manual is also suitable for:

83m983ma

Table of Contents