Download Print this page

Care, Cleaning & Storage - Breville BKE360 Instructions Manual

Stainless steel kettle

Advertisement

Care, cleaning and storage
Always switch off at the power outlet and unplug
the appliance from the power outlet before
cleaning.
Removable filter
The kettle features a removable mesh filter to
remove scale deposits for cleaner water. To clean
the scale deposits from the filter, open the lid and
remove the filter by pressing the filter towards the
centre of the kettle to unclip.
The filter can be cleaned by placing under
running hot water and rubbing with a cleaning
cloth or brush.
To replace filter, simply clip the filter back in
position in the slot behind the spout of the kettle.
The filter could become damaged with time, please
check regularly and replace if found damaged.
The concealed element in the base of the kettle is
made from high quality stainless steel. Any brown
stains appearing are the result of mineral deposits
and are not rust.
WARNING: NEvER IMMERSE THE KETTlE BASE, SWITCH AREA, POWER BASE, POWER CORD OR
POWER PlUG IN WATER, OR AllOW MOISTURE TO COME INTO CONTACT WITH THESE PARTS.
8
Removal of mineral deposits
Mineral deposits in tap water may cause the
kettle interior and water window to discolour over
time. Stains and scales may be removed by using
the Breville Kettle Cleaner, available from most
electrical retailers.
Kettle Cleaner - directions for use:
1.
Add 125ml of Breville Kettle Cleaner to 2
litres of water.
2.
Fill kettle with mixture on a protected
surface.
3.
Bring kettle to boil and let stand for 30
minutes.
4.
Clean spout by using a cloth dampened with
Breville Kettle Cleaner, rub well. Then wipe
off.
5.
Bring the kettle to boil for a second time,
then empty solution.
6.
Fill kettle with fresh water and bring to the
boil, discard boiled water. Now your kettle is
ready to make your next cup of tea/coffee.
For best results we recommend you use the
Breville Kettle Cleaner. Alternatively, stains may
be removed by:
1.
Filling the kettle until
vinegar and 2 parts water. Boil and allow to
stand over night.
2.
Emptying the solution from the kettle. Fill the
kettle with clean water, bring to the boil and
discard the water. Repeat and the kettle will
be ready for use.
full with 1 part white
2
3

Advertisement

loading