Breville BJE820 Instructions Manual page 9

CoNtENtS oPERAtING YoUR PRoFESSIoNAl 800 CollECtIoN JUICE PRoCESSoR
BREvILLE PROFESSIONAL 800 COLLECTION™
1
BJE820_JUICER_FA.indd 16-17
(CoNtINUED)
operating
oPERAtING YoUR BREVIllE PRoFESSIoNAl 800 CollECtIoN™ DUAl DISC JUICER PRoCESSoR
WItH JUICE ExtRACtoR oR PUREE ExtRACtoR
StEP 1 StEP 4
Wash your selection of fruit and/or vegetables Plug the power cord into a 230/240v power
ready for juicing. Prepare fruits according to outlet and then turn the power on at the outlet.
charts above. The light surrounding the 'Start | Stop" button
will illuminate.
StEP 2
NOTE: The light will be illuminated for 2
Based on the type of fruit or vegetable you are
minutes before fading into sleep mode.
juicing/pureeing select either the Juice Extractor
The light will come back on by activating
or the Puree Extractor.
any of the controls.
WARNING: Do Not PUt HARD FRUIt
AND VEGEtABlES (IE.
CARRotS, APPlES, FRESH StEP 5
BEEtRoot, EtC.) oR ICE
Use the speed selector table as a guide for
tHRoUGH JUICER WHEN
juicing different fruit and vegetables. Push the
USING PUREE ExtRACtoR.
"Start | Stop" button and the unit will
tHIS CoUlD DAMAGE PARtS
automatically start.
oF tHE UNIt.
StEP 6
With the motor running, place food into the Feed
StEP 3
chute Using the Food Pusher, gently guide food
down the Feed Chute. Do not exert excess
Ensure the Professional 800 Collection Dual Disc
pressure. To extract the maximum amount of
Juice Processor is correctly assembled – see
juice, always push the Food Pusher down slowly.
previous instructions. Ensure the Juice Extractor
or Puree Extractor is thoroughly cleaned before
each use (refer to cleaning on pages 26-27).
Ensure you place the Juice Jug (or glass) under
spout before commencing juicing.
StEP 7 – USING tHE JUICE ExtRACtoR
As fruits and vegetables are processed juice will
flow into the juice jug and the separated pulp will
accumulate in the Pulp Container.
The Pulp Container can be emptied during
juicing by turning Juicer OFF at the control panel
and then carefully removing the Pulp Container.
Replace the empty Pulp Container into position
before continuing to juice.
NOTE: Do not allow the Pulp Container to
over fill as this may affect the operation of
appliance.
1 1
3/6/08 3:19:24 PM