Breville donna hay BEM800DH Instruction Booklet page 7

ASSEMBlY AND OPERATION OF YOUR WIzz
2. Press the beater, dough hook or whisk
upwards and turn clockwise until it
locks securely onto the locking pin on
the spindle.
3. Lower the mixer motor head by
depressing the tilt back hinge button
and pushing the mixer motor head
down until it locks into the horizontal
(closed) position.
4. Splash guard can now be assembled
if required. Slide main ring into position
on top of bowl, then assemble pour
spout.
OPERATING THE MIxER
Planetary Mixing Action
By replicating a similar mixing action used
by commercial mixers in bakeries and
patisseries, The Breville Wizz Planetary
®
Mixer head rotates around the bowl whilst
rotating the beater in the opposite direction.
12
® PlANETARY MIxER continued
This ensures a superior and thorough mixing
result without the need for a rotating bowl.
1. Ensure the speed control dial is set to
the 'Off' position, plug the cord into a
220-240v power outlet and switch the
power 'ON' at the power outlet. The
illuminated LED speed indicator band
will flash and the Count Up/Down timer
will display "0:00." The mixer is now
ready to be used.
NOTE: If the mixer has not been used for 3
minutes it will automatically go to a power
saving "stand by mode." The mixer can be
left in stand by until the ingredients in the
bowl are ready to be mixed. To exit stand
by and begin mixing, turn the dial to the
selected speed or press one of the 'Count
Up/Down timer buttons.
2. Add ingredients to the mixing bowl as
indicated in the recipe.
Always begin mixing by selecting a low
speed setting on the speed control dial.
This will prevent ingredients splattering.
Increase the speed as suited to the
mixing task. The speed setting can be
adjusted during operation by moving
the dial clockwise for the main mixing
settings. Use the mixing guide in this
booklet as a reference.
ASSEMBlY AND OPERATION OF YOUR WIzz
If necessary, stop the mixer during operation
and scrape any food mixture down the sides
of the mixing bowl with a spatula.
NOTE: Always turn the Breville Wizz®
Planetary Mixer off if you need to scrape
the bowl during use, and then switch back
on and continue mixing.
THE COUNT-UP TIMER
The count-up timer is especially useful to
gauge mixing time or when recipe does not
specify the mixing time. You can monitor
the time it takes to thoroughly mix the
ingredients, so that the next time you mix
the same ingredients you can set the count-
down timer for the specific time.
The count-up timer will automatically begin
counting up as soon as the dial is rotated
from 'Off' to one of the speeds. When the
dial is turned back to 'Off', the total mixing
time will be displayed on the timer and will
flash.
® PlANETARY MIxER continued
THE COUNT-DOWN TIMER
The count-down timer is especially useful for
any recipe that specifies the length of time
ingredients should be mixed. For example,
if a recipe reads, "beat for 3 minutes," you
can set the count-down timer to 3 minutes
by pressing the up/down arrows. After 3
minutes of mixing, an alarm will sound and
the motor will automatically turn off. The
count-down timer will flash "OFF". The
control dial must to be rotated to the "Off"
position to reset the timer and to continue
mixing.
To set the count down timer, press the up or
down arrows until the desired mixing time is
displayed on the LCD screen.
NOTE: Press and hold the arrows down
to scroll through the timer setting more
quickly.
Rotate the dial clockwise to select the desired
speed and to begin mixing. When the timer
has finished counting down, "0:00" will flash
on the LCD screen and a beep will sound
to notify you that the time has expired. The
mixer will automatically turn the motor off.
The control dial must be rotated to the 'OFF'
position to reset the timer and to continue
mixing.
13