NTT docomo Foma F900iT Manual

page of 420

/ 420
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Manual

Application

for

'04.5

Table of Contents

Need help?

Do you have a question about the Foma F900iT and is the answer not in the manual?

Questions and answers

Summary of Contents for NTT docomo Foma F900iT

Page 1 Manual Application ’04.5...
Page 2: Before Using Your Foma Mobile Terminal
Thank you for purchasing FOMA F900iT mobile terminal. Both before and during use of your FOMA F900iT mobile terminal, be sure to thoroughly read this and "Basic" manual to ensure you are able to correctly and efficiently use your FOMA F900iT mobile terminal.
Page 3: Copyrights And Trademarks
Macromedia, Inc. in the United States and other countries. • QR Code is a registered trademark of Denso Wave Inc. • Bluetooth and its logo are trademarks of Bluetooth SIG, Inc. and licensed to NTT DoCoMo. • miniSD™ is a trademark of the SD Association.
Page 4: Conventions Used In This Manual
• Windows 98 is written as general term of Windows 98 and Windows 98SE. Organization of the manual The FOMA F900iT Operation Manual set consists of two manuals: "Basic" and "Application". An overview of each manual is explained below. Read each manual as needed. Use care when storing the manuals to avoid losing or misplacing them.
Page 5: How To Use This Manual
How to use this manual <Quick Reference Manual → "Basic" manual P380> The structure of this manual and the manner of description are explained here. • The operation procedure is mainly explained in Shortcut operations ( → "Basic" manual P48). For shortcut operations for the individual menu items, see menu list ( →...
Page 6: Table Of Contents
Before Using Your FOMA Mobile Terminal ........... inside front cover Copyrights and trademarks ......................1 Organization of the manual ......................2 How to use this manual ....................... 3 CONTENTS ........................... 4 Introduction Introduction Reading display .......................... 10 Reading sub-display ........................13 Multiaccess and Multitask ......................
Page 7 Chara-den Chara-den ........................... 94 Downloading Chara-den ......................94 Displaying Chara-den ........................ 95 Selecting Chara-den action ....................... 97 Using Chara-den to make video-phone calls <Chara-den> ............ 98 Taking images of Chara-den <Recording Chara-den> ............99 Setting Chara-den recording quality, etc. <Image Settings/Video Settings> ...... 102 Managing Chara-den .......................
Page 8 Short Message (SMS) Creating and sending Short Message (SMS) <Compose SMS> .......... 175 Saving Short Message (SMS) in process of creation for sending later ......177 Viewing sent/unsent Short Message (SMS) <Outbox/Unsent messages> ......178 Receiving Short Message (SMS) automatically <Receive SMS> ........180 Inquiring whether there are Short Messages (SMS) present <Check new message>...
Page 9 i-motion Playing video/i-motion ......................270 Using video/i-motion ....................... 273 Displaying detail information <Detail Information> ............. 276 Editing video/i-motion ......................278 Using album <i-motion Album> ..................... 282 Configuring "i-motion" <Settings> ..................285 Deleting video/i-motion ......................286 Sorting video/i-motion <Sort> ....................287 Melody Playing melody ........................
Page 10 Using FOMA PC Configuration Software FOMA PC configuration software ................... 338 Installing FOMA PC configuration software ................339 Making communication settings (Easy setup) ..............342 Executing communication set with FOMA PC configuration software ....... 350 Uninstalling FOMA PC configuration software ..............352 Optimizing packet communication setting with W-TCP setting ..........
Page 11: Introduction
Introduction...
Page 12: Reading Display
Reading display The descriptions of icons indicated on the top or at the bottom of the display are shown below: • Icons not explained in this section → "Basic" manual P39 123456789! " Condition Page Condition Page In data transfer mode P320 Unread i-mode Mail P145...
Page 13 Guide row Operations that can be executed by pressing m, t, , p and a are displayed in the guide row. ■ Operating with keys <Example> Guide row for Compose New Mail screen The display positions of operations correspond with the keys as shown in the figure.
Page 14: List Screen
Icon list displayed in a task bar • The icons indicated on the task bar are listed below: under "Page" columns show pages in "Basic" manual. Condition Page Condition Page Communicating by voice call Record message and Voice P93, 250 memo being activated Communicating by video-phone (32 K) Memopad displayed...
Page 15: Reading Sub-Display
INFORMATION • Please be informed that the following cases represent characteristics of LCD displays and not defects in FOMA terminals: - F900iT displays are manufactured by taking advantage of highly advanced technology but some dots may be always or never illuminated. - If the battery pack is removed from FOMA terminal by mistake before the terminal power is turned off, afterimages may remain for some time.
Page 16: Other Displays
INFORMATION • Main operations for side keys → "Basic" manual P51 • Opening FOMA terminal clears information shown on the sub-display. Displaying detail information Detail information of the date and time, phone number or mail address is displayed in ticker by pressing side key [ ▲ ] while the number of items is displayed. Up to ten detail information screens can be displayed by switching using side key [ ▼...
Page 17: Multiaccess And Multitask
Multiaccess and Multitask Multiaccess allows two communication functions, namely voice calls and packet transmission (data communication, etc. by connecting i-mode terminals, PCs, PDAs, etc. with FOMA terminals) to work simultaneously. In addition, more than one function can be activated and operations can be performed while switching screens by multitasking. •...
Page 18: Number Of Saved, Registered And Protected Items In Foma Terminal
Number of saved, registered and protected items in FOMA terminal Number of saved/ Number of protected Type Page registered items items Received message * Up to 1000 Up to 500 P145, 180, 192 Mail Sent message * Up to 200 P127, 175, 192 Up to 100 Unsent message *...
Page 19: Function Of Uim Operation Restrictions
Function of UIM operation restrictions FOMA terminal is provided with the UIM operation restriction function for protecting your data. • To protect the information provided by IP (information service provider), this function restricts the display and playing of the download data, file attached to mail and message R/F if the correct UIM is not inserted. Restricted data types are as follows: - Images (including Animation and Flash Graphics) - i-motion...
Page 21 i-mode i-mode .................... 20 Connecting to Sites ..............27 i αppli ..................... 63 Chara-den ..................94 i-motion ..................107 Message Service ................. 111 19 19...
Page 22: What's I-Mode
What's i-mode? With i-mode, you can use online services from IP (Information service provider) Site (Program) or Internet by way of i-mode Mail or i-mode compatible FOMA terminal (hereinafter referred to as i-mode terminal). • IP (Information service provider) site (program) connection This service can be accessed various sites provided by IPs (Information service providers) using a simple key sequence.
Page 23: Displaying Sites
i-mode screen Menu name Function Menu The first page displayed when connection is made to the i-mode Center, which allows access to various sites (programs), " 週刊 i ガイド ", etc. Bookmark Register addresses of your favorite homepages in the i-mode terminal to enable direct access to the pages later.
Page 24 INFORMATION • You may need to pay information fee to access certain sites (i-mode charged sites). • You also need to separately subscribe to use services provided by IPs (Information service providers). • You will not be charged for packet communication unless the i-mode Center is accessed, even if the i-mode icon blinks.
Page 25 ■ i αppliDX i αppliDX allows even more convenient and enjoyable use of i αppli by using the information on a terminal compatible with i-mode (received/sent messages, Call history, Phonebook data, etc.) for creating messages with a user-defined character screen and enabling a character for incoming communications that lets you know whom they came from and by using mails for more up-to-date information on stock prices and games in progress.
Page 26 ■ SSL communication SSL stands for Secure Sockets Layer, which is a safer data communication method that uses certification/encryption technology to protect privacy. On SSL pages, data is encrypted and sent/received to prevent information interception, impersonation or alteration, thus allowing personal customer information such as credit card numbers and street addresses, etc.
Page 27: Internet Connection
■ Message service When you subscribe to a site that provides Message Service, desired information (messages) is automatically delivered to your i-mode terminal. There are 2 type of messages services: MessageR (request) and MessageF (free). Message Request Information is delivered automatically after subscribing to a site that (MessageR) provides Message Service.
Page 28 Before using i-mode • The contents of sites (programs) and Internet Web pages are usually protected by copyright laws. All or any portion of text, image or other data imported to your i-mode terminal from a site (program) or Internet Web page cannot be altered except for personal use, and cannot be sold or redistributed in any form without the express permission of the copyright holder.
Page 29: Connecting To Sites
Connecting to sites <i Menu> You connect to i-mode to view various sites. For the site screen using Flash Graphic, you can select items by tapping . Direct tapping items on the site screen is not effective. Press d1 on the stand-by display, select "English" and press Blinks while in i-mode.

Page 30 INFORMATION To operate from a site display, press and select " Menu". • You may need to pay information fee to access certain sites (i-mode pay sites). • You may also need to separately subscribe to use services provided by IPs (Information service providers).

Page 31 Connecting to SSL page You can display SSL compatible sites (SSL pages) using the same operation as for displaying ordinary sites. • Some SSL pages may not allow connection if date/time setting is not made. → "Basic" manual P66 • To connect to FirstPass compatible site, you need to download a User certificate for the site from the FirstPass center and save it on Green UIM ( →...

Page 32: Operations Enabled During Site Display
Operations enabled during site display The basic operations enabled during site display are explained below. • Operation procedure of touch panel → "Basic" manual P36 Selecting items The following operations are available on some sites during i-mode. Displaying linked pages Items used to jump to a related page from the currently displayed page are called link items.

Page 33: Entering Characters
Selecting pulldown menu With this menu, selections are hidden. Press ud to select a pulldown menu and press , press ud to select the menu item and press You can select multiple items from pulldown menu by repeating the operation of pressing ud for some sites.

Page 34: Flash Function
Flash function Flash is an animation technology that uses images and sounds, which makes colorful animations and expressive sites available. An image that employs Flash (Flash Graphic) can be taken into FOMA terminal and set as the stand-by display screen. Flash Graphics •...

Page 35 INFORMATION • When you display Page A → Page B → Page C in this order, ( ① and ② ), return to Page A ( ③ and ④ ) and proceed to Page D ( ⑤ ), the display history of Page A → Page B → Page C is erased.

Page 36: Using My Menu
Using My Menu <My Menu> You can record frequently accessed sites in My Menu, which allows you to quickly access the site later. • My Menu is carried over as it is when you change the mova service (i-mode subscription) to the FOMA service. However, there are certain sites that cannot be carried over in My Menu.

Page 37: Changing I-Mode Password
Changing i-mode password <Change i-mode password> You need your i-mode password to record/delete sites in/from My Menu, subscribe to or cancel Message Service, i-mode pay sites, or make mail settings. i-mode password is set to "0000" by default; be sure to change it to another unique number. Be careful never to reveal your i-mode password to others.

Page 38: Connecting To Internet Web Page
Connecting to Internet Web page <Internet connection> You connect to the Internet and access i-mode compatible Web pages. You specify Internet Web pages by entering the address (URL). • The Internet Web pages not compatible with i-mode may not be displayed correctly. Pressd31on the stand-by display.

Page 39 Displaying characters correctly <Switch encode> When characters of sites or Internet Web pages are not displayed correctly, they may be displayed correctly by changing the character encoding. While the site or Internet Web page is displayed, press m951. The switch encode is switched in the following order: Auto switch → SJIS → EUC →...

Page 40: Registering Web Pages And Sites For Quick Browsing
Registering Web pages and sites for quick browsing <Bookmark> If you frequently browse the same page of a site such as the weather forecast for a specific area or the price of certain stock, you can add it as a bookmark for convenient access later.

Page 41 Select the folder and press • Icon definitions: : Without i-mode shortcut : With i-mode shortcut : Key No. of i-mode shortcut - i-mode shortcut → P42 ■ Checking URL Select bookmark to check the URL and press m4. Select Bookmark of the site to be displayed and press You are connected to the site or Internet Web page.

Page 42 Renaming Bookmark folder You can change the saved Bookmark folder name. Press d2 on the stand-by display. The folder list is displayed. Select a folder to rename and press m3. • You can enter up to eight two-byte or 16 one-byte characters.

Page 43 Renaming bookmark The titles of saved bookmarks can be changed. Press d2 on the stand-by display, select the folder and press The Bookmark list is displayed. Select Bookmark to change the title and press m1. • You can enter up to 12 two-byte or 24 one-byte characters. •...

Page 44 Connecting to site using simple key sequence <i-mode Shortcut> If you set a Bookmark as an i-mode shortcut, you can quickly display the site or Internet Web page from the stand-by display. Setting as i-mode shortcut Press d2 on the stand-by display, select the folder and press The folder list of Bookmark is displayed.

Page 45: Storing Site Contents
Storing site contents <Screen Memo> You save screens of your favorite sites as screen memos. Storing screen memo • The maximum size of a screen memo file that can be saved is 100 Kbytes including images, etc. in the screen. Display the site to save as a screen memo and press m The currently displayed site is saved as a screen memo.

Page 46 Renaming screen memo title The title of saved Screen Memo is changed. Press d4 on the stand-by display. The screen memo list is displayed. Select the screen memo to rename the title and press m • You can enter up to 12 two-byte or 24 one-byte characters. •...

Page 47 Deleting screen memo You delete screen memos one at a time or all at once. • Protected screen memos cannot be deleted. Even when you perform Delete all, protected screen memos are not deleted. Cancel protection first and then delete them. Press d4 on the stand-by display .

Page 48: Downloading Image From Site
Downloading image from site <Save image> You save your favorite images or frames from sites to FOMA terminal. Saved images can be viewed using Image or set on the stand-by display. • The maximum size of an image file that can be saved is 100 Kbytes. •...

Page 49 Press p. mode" folder of "Image". → P245 Image is saved to " • Frame or Using as stamp images are saved in "Item" folder. You can set on stand-by display by pressing m. → P247 ■ When available space in image storage is not enough/the maximum number is exceeded A confirmation screen is displayed asking whether to delete an image saved in FOMA terminal.

Page 50: Downloading Melody From Site
Downloading melody from site <i-melody> You download your favorite (i-melody compatible) melodies from sites and save them to FOMA terminal. Saved melodies can be played with "Melody" ( → P288) or used as ring alert. Display a site containing the melody to download, select the melody and press You can stop downloading by pressing p.

Page 51: Useful Functions
Useful functions The phone numbers, e-mail addresses and URLs on the screen displayed can be used for directly making calls, creating messages and connecting to sites. They can also be save in Phonebook. Making call <Phone To (AV Phone To)> If a phone number is displayed on the screen (site, screen memo, Message R/F, etc.), you can make calls (including video-phone calls) directly from the screen.

Page 52 Create and send i-mode Mail. The i-mode Mail is sent to the selected mail address. • i-mode Mail creating/sending procedure → P127 INFORMATION • When several addresses are listed, the Mail to function may not be available. • You may not be able to use Mail To function on some sites. Connecting to Internet <Web To>...

Page 53 Copying URL You copy URL from the currently displayed site or screen memo, etc. Copied characters can be pasted in entry fields in the mail creation screen and phonebook registration screen, etc. • Copied characters are kept until FOMA terminal is OFF and you can paste them in other locations any number of times.

Page 54 Registering phone number and address in phonebook If a phone number or mail address is displayed on the screen (site, screen memo, Message R/F, etc.), you can register it in the phonebook. You can either newly register the data or add data to previously registered phonebook data.

Page 55 Select the phone number or mail address to register and press m82. Press 1 or 2. Select the phonebook to update and press • The selected phonebook or mail address are registered. Check the contents and register the item. • Phonebook registering procedure → "Basic" manual P115 Step 2, P125 Step 2 INFORMATION •...

Page 56 Select the Bookmark to register and press m81. The URL for the selected Bookmark is registered. • Display "Other" screen by pressing lr, and you can check the URL. Set the name, etc. and register the item. The URL for the selected Bookmark is registered. •...

Page 57: Setting More Functions
Setting more functions Set the more function of the site, Message R/F, etc. Setting image display, lighting and sound <Image & Effect Settings> Default Image: Display Animation: Display Set lighting: Always on Sound effect setting: ON The image, lighting and sound effect (when playing Flash) to be enabled when a site, Screen Memo, Message R/F, etc.

Page 58 Setting colors of site display <Display Colors> Default Font/back: Default Link color: Default You set display color used to display the sites or screen memos. • Each item color can be selected from 16 colors. Press d82 on the stand-by display. Item Description Normal setting...

Page 59 INFORMATION • The link color (Visited link) is effective when the linked screen is stored in the history. • If the color is specified in the tag of the site or screen memo, the specified color takes precedence and the specified color does not change in Customize. •...

Page 60 Press d73 on the stand-by display. ■ Restoring settings for using i-mode Select " mode" and press turns to . Go to Step 6. ■ Changing to the previously set Host Select Host and press for the selected Host turns to .

Page 61: Using Certificate
Using certificate Perform the operation of the certificate required for the SSL communication. Displaying certificate and set certificate validity <Certificate Setting> You can check the certificate for SSL communication and set the certificate validity. Displaying certificate • When the user certificate has not been downloaded, "User certificate" is not displayed. •...

Page 62 Setting certificate validity Press d74 on the stand-by display. The certificate list is displayed. Select the certificate to set and press m. • The set condition is as shown below: : ON : OFF Press p. Certificate validity ON or OFF is set. INFORMATION •...

Page 63 Select "Request your certificate" and press Select "Continue" and press • PIN2 code → "Basic" manual P193 Enter PIN2 code and press The completion screen is displayed and the user certificate is issued. Downloading certificate Press d75 on the stand-by display. Select "English"...

Page 64 Using FirstPass • FirstPass is DoCoMo's electronic authentication service. Using FirstPass allows client authentication, in which a site and the FOMA terminal exchange and verify each other's certificate for authenticating each other. • FirstPass is possible to be used for Internet communication from a FOMA terminal and Internet communication in the condition the FOMA terminal is connected to a PC.

Page 65: I Αppli
i αppli Obtaining i αppli from sites allows more convenient use of a FOMA terminal compatible with i-mode (hereinafter called i-mode terminal). For example, various games can be downloaded to the i-mode terminal for amusement and i αppli for stock price information can be obtained for automatically checking stock prices at regular intervals.

Page 66 Using saved data Some i αppliDX software allows viewing, registration and operation of saved data such as messages, redials, received calls and ring alerts in addition to the saved data available with standard i αppli (phonebook, bookmarks, schedules, images and icons). The following operations can be performed using saved data: - Add to phonebook - Search phonebook...

Page 67 ■ i αppli auto start Software can be automatically started at the user-specified time, date, day of week, etc. Some software allows auto start at the time intervals preset with the software. → P82 ■ Shooting with camera Images can be taken with FOMA terminal camera from software. → P212 •...

Page 68: Downloading Software
Downloading software You download your favorite software from sites and store it in FOMA terminal. • Downloading cannot be performed when PIM lock is active. • If there already are 5 Message i αppli mail folders when downloading Message i αppli, the software cannot be downloaded.

Page 69 ■ When available space in software storage area is not enough/the maximum number is exceeded A confirmation screen is displayed asking whether to delete software saved in FOMA terminal. To save software, follow the instructions on the screen and delete software in FOMA terminal until an available space required for saving the application is recovered.

Page 70: Starting Software
Starting software You display a list of software saved in FOMA terminal or downloaded software and start the software from that list. • Software downloaded from sites may not start or operate correctly. Hold down d for over a second on the stand-by display. •...

Page 71 INFORMATION • No sound is played when Silent mode is active. If Custom Silent mode is set, "Ring volume" (Ascending not included) setting is used. • Running software is interrupted when any of the following conditions occur. Interrupted software is automatically resumed. However, depending on the particular software, the status at the time of interruption may or may not be restored.

Page 72 ■ Connecting to site from software • Connection to a site (Web To) is not available from i αppli stand-by display. → P86 A confirmation screen is displayed asking whether to connect to the site. Select "Yes" and press When you display the site, the software program quits. ■...

Page 73: Using Pre-Installed Software
Using pre-installed software When you buy a FOMA F900iT, it contains seven items of software. If you delete the software, you can download the software from the site of "@ F ケータイ応援団 ". • It is necessary to adjust date and time. → "Basic" manual P66 •...

Page 74 Playing method Select an action from menu icons. Read the JAN code or QR code to give food to the dog. If you breed the dog playing with a ball, injecting, touching softly, and scolding, the ability level of the dog is going up, and the dog becomes to assist you. In a receiving box of the Chibi Wan mail, the dog appears in the screen, and shows various motions and feeling expression.

Page 75 麻雀牌パズル F (Mahjong tile puzzle F) This is a simple puzzle game in which a pair of the same tile are selected and eliminated from a stack of mahjong tiles accumulated orderly. It has two levels "beginner" and "normal" and four stages are prepared each. Display a software list, select "...

Page 76 Option Select the following items and press in the title screen to set or display each item. Item Description OPTION Sets ON/OFF of BGM in the game or vibrator. HELP Displays rule of the game. ルーインエクスプローラー (Ruin Explorer) Ruin Explorer is a roll playing game to search Dungeon such as underground maze, or tower.

Page 77 ■ Adventure part The adventure starts from 1st floor of Dungeon. The Dungeon is composed of multi floors (about 10 to 100 floors), and the player is ascending up or descending down to underground. The player combats with monsters in each floor and collects coins*. *: Collected coins are possible to be deposited to a coin server.

Page 78 • Level up The player gets level up by experience value which the player gets by striking down monsters during research in Dungeon. By this level up, value of HP (life) increases, and status (capability) increases. But, if the player goes out Dungeon, and returns home, the HP (life)/status value resets all and returns to level 1.

Page 79 Select " はい (YES)", and press Profession deciding screen is displayed. Press to spin the wheel, press to stop the wheel, then press Afterward, operations four to eight is played repeating number of times for persons. When the setting is finished, the game starts. ■...

Page 80 フリーセル (FreeCell) FreeCell is an easy card game selecting and moving 52 cards with a cursor to arrange in order of number. Display the list of software, select " フリーセル (FreeCell)", and press Press in the title screen. The game starts. Playing method Move cards to a home cell for each mark from a lower number card.

Page 81: Various Setting
Operate the remote control in a main operation panel. 0 to 9, *, #: Direct channel switching : Channel switching (to a lower channel) : Channel switching (to a higher channel) u : Increases sound volume d : Decreases sound volume : TV power source ON/OFF m : Display of a device select screen p : Display of a sub-operation panel...

Page 82: Checking Software Information
Checking software information <Software Description> You display information about a software program. When you execute this function from the list of software screen, you can view detailed information about individual software program. When you execute this function from the list of folders screen, you can view current setting conditions.

Page 83: Starting Software With One-Touch Button
Starting software with One-touch button <One-touch button> Software is started with simple operation. • To start software with One-touch button, it is necessary to register it beforehand. → P85 Hold down for over a second on the stand-by display. The registered software is started. INFORMATION •...

Page 84: Automatically Starting I Αppli
Automatically starting i αppli Collective setting is made for all software pieces or different conditions are set for different software pieces. • Date and time setting is required. → "Basic" manual P66 Setting conditions of auto start for each software <Set Auto Start Info.> Set the start time or method for software supporting Auto start and display the preset details.

Page 85 ■ For weekly automatic start on the specified day of week ① Press 3. ② Select Weekly field, press , select the day of week of activation and press Select the software setting field, press and press 1 or 2. Some softwares (i αppliDX) are capable of setting Auto start in its own.

Page 86 Displaying history of software which failed auto start <Start Failure History> When automatic start of the software fails, name of the software, date and time, causes are recorded. • Latest 20 failures are recorded. Press mp33 on the stand-by display. Display History select screen is displayed.

Page 87: Setting Software Operation
Setting software operation <Software Settings> You set various usage conditions for i αppli. Hold down d for over a second on the stand-by display. The folder list is displayed. Select a folder and press The software list is displayed. Select the software to set and press m7. Item Description Sets the software which supports i αppli stand-by...

Page 88: Operating I Αppli Stand-By Display
Operating i αppli stand-by display <i αppli stand-by display> You operate software set on i αppli stand-by display. • To use the i αppli stand-by display, it is necessary to register it beforehand. → P85 • While i αppli stand-by display is set, (α...
Page 89 Canceling i αppli stand-by display You cancel the software for i αppli stand-by display from the stand-by display. Press cf on the i αppli stand-by display. Select "Terminated" and press i αppli stand-by display is canceled. You can temporally exit the i αppli stand-by display by selecting "Ended" and .

Page 90: Setting Lighting And Vibrator During Software Execution
Setting lighting and vibrator during software execution <Display Light/Vibrator> You can set the lighting method and the vibrator operation during software execution. Setting Display light Default Use phone settings Press mp324 on the stand-by display. Item Description Use phone setting The light is turned ON depending on the display light in the settings menu ( →...

Page 91: Managing I Αppli
Managing i αppli FOMA terminal is provided with various management functions for easier use of software. Upgrading software <Upgrade> When a new version of the software is placed in a site, you can easily upgrade the software. • Cannot be downloaded when PIM is locked. •...

Page 92 Creating/deleting folder for software Folders for saving i αppli can be created and deleted. Creating folder • You can create up to 20 folders. Hold down d for over a second on the stand-by display. The folder list is displayed. Press m4, enter the folder name and press •...

Page 93 Changing order of software in a folder The sorting of folders in the folder list can be changed. Hold down d for over a second on the stand-by display. The folder list is displayed. Select folder to move, press m and press 5 or Pressing 5 moves folder upward by one.

Page 94 Deleting software Delete one software item at a time or all software items in a folder collectively. • The protected software cannot be deleted by "Delete current". Delete software after releasing the protection. Alternatively, select "Delete all", enter the terminal security code or authenticate your fingerprint and then delete the software by selecting "Delete all."...

Page 95: Using Various Functions From I Αppli
Using various functions from i αppli Various functions such as shooting with camera, infrared communication, etc. are available with some i αppli. Using camera function from i αppli Images can be taken with camera from i αppli. Hold down d for over a second on the stand-by display. The folder list is displayed.

Page 96: Chara-Den
Chara-den Chara-den is a character to display on the screen instead of your own image when you use video-phone. The character can be made to move or casually express a feeling at a given time by pressing dial keys during a video-phone call. Also, still images or video of Chara-den being displayed can be recorded and saved.

Page 97: Displaying Chara-Den
Displaying Chara-den Chara-den saved in FOMA terminal or Chara-den saved after download is displayed. • Chara-den are saved in the following fixed folders: Folder name Type of Chara-den i-mode Chara-den obtained from sites Preinstalled Chara-den preset in FOMA terminal by default Press m34 on the stand-by display.

Page 98 • Preinstalled Chara-den actions - Boon Boon (Dimo) 全体アクション喜ぶ (Pleased) ありがとう (Thanks) ノーリアクション (Full motion) (No reaction) 怒る (Angry) ラブラブ (Lovey-dovey) バイバイ (Bye-bye) 悲しむ (Sad) ごめんなさい (Sorry) びっくり (Surprised) - Ai 全体アクションうれしい！ (Happy!) ZZZ・・・(ZZZ...) シクシク (Sob) (Full motion) ムカッ！！...

Page 99: Selecting Chara-Den Action
Selecting Chara-den action You can have a Chara-den make motions and change how it makes actions. • The 2 types of Chara-den action can be selected. Item Description Action The entire body of the character is activated to represent emotions. (Full motion mode) Action of parts Body parts or facial expression of the character are activated to...

Page 100: Using Chara-Den To Make Video-Phone Calls
Using Chara-den to make video-phone calls <Chara-den> When using video-phone, you can have Chara-den displayed as substitute image. Chara-den displayed is activated while talking. Press m34 on the stand-by display, select folder and press Chara-den list is displayed. Select Chara-den and press t. •...

Page 101: Taking Images Of Chara-Den
Taking images of Chara-den <Recording Chara-den> Chara-den can be recorded as still image or video for displaying and saving it. ■ Viewing the Chara-den recording screen • Icon definitions: Type of record : Video + Voice : Only video (w/ mic) : Only video (w/o mic) : Still image - Other icons →...

Page 102 INFORMATION • To switch Still image/Video record on the Chara-den recording screen, press and select "Type of record". • The numbers for the submenu items depend on the screen to operate. and select "Settings" → To switch actions from the Chara-den recording screen, press "Change Action".

Page 103 Press p. Ending sound is heard, recording is finished and video recorded up to that point is saved in "Saved image" of "i-motion". → P270 • Press to pause while recording. Press again to resume shooting. • If the size of video file reaches the limit while recording, recording is automatically stopped and video recorded up to that point is saved.

Page 104: Setting Chara-Den Recording Quality, Etc.
Setting Chara-den recording quality, etc. <Image Settings/Video Settings> Set the still image size, quality or shutter sound for recording Chara-den as still image or video. Make separate settings for still images and videos. Making still settings Quality: Standard Size restriction: 9000 byte Shutter sound: Standard Default Rec.File Restriction: Unrestricted Auto save: Yes Save to: Terminal Display size: Large Make settings for recording Chara-den as still images.

Page 105 Making video settings Quality: Standard Size restriction: Msg. attachment size Shutter sound: Standard Default Rec.File Restriction: Unrestricted Auto save: Yes Save to: Terminal Display size: Large Make settings for recording Chara-den as videos. Display the Chara-den video shooting screen and press •...

Page 106: Managing Chara-Den
Managing Chara-den Chara-den saved in FOMA terminal or downloaded Chara-den can be managed. Sorting Chara-den <Sort> Default Sort criteria: Save date & time Order: Descending Sorting of Chara-den list is changed. Press m34 on the stand-by display, select folder and press Chara-den list is displayed.

Page 107 Deleting folder • Default folders ("i-mode" "Preinstalled") cannot be deleted. • Deleting a folder with any Chara-den left in it deletes all Chara-den in the folder. Press m34 on the stand-by display. The list of folders is displayed. Select folder to delete and press m3. A confirmation screen is displayed asking whether to delete the folder.

Page 108: Viewing Detail Information
Viewing detail information <Detail information> Detail information on Chara-den can be viewed. • The following items are displayed: - Check title* - Original title - File name - File restriction - Rec.file restriction - Display size - File size - Created date & time - Saved date &...

Page 109: Downloading I-Motion
Downloading i-motion You can download video and sound from sites and Internet Web pages and play/store them. Images or sounds saved in FOMA terminal can be played on "i-motion" or can be set on movie ringtone (ring alert, etc.). • To download i-motion with the replay duration and period set, date and time setting is required. →...

Page 110 INFORMATION • There are following types of i-motion file. The type is already decided for each i-motion file and it cannot be selected. Type Description Replay type Type The i-motion file is played while receiving the data. Normal type Replay while (can be saved*) retrieving data After data reception is completed, you can play it in the...

Page 111 Select "Save" and press Enter the title and press to set the Title (Displayname). You can enter up to 36 one- or two-byte characters. • Information at i-motion save, such as Title (Display name), are reflected in the detail information of the file that is referred from "i-mode"...

Page 112: Setting Whether To Play I-Motion Files Automatically
INFORMATION • If a link to a phone number (Phone To (AV Phone To) → P49), a mail address (Mail To → P49), a site (Web To → P50), etc. is set within the subtitle, a confirmation screen is displayed after replay is finished, allowing you to perform the operation.

Page 113: Receiving Message R/F Automatically
Receiving Message R/F automatically <Receive Message R/F> When Message R/F is received, you are informed by the screen display, ring alert, vibrator, or incoming light. The received Message R/F is saved in FOMA terminal. Receives message R/F. Blinks while Message R/F is received. : Unread MessageR in memory of the Blinks terminal...

Page 114 INFORMATION • Message R/F is automatically received but the reception screen or reception result screen is not displayed and incoming message ring alert/alert light is not activated in the following conditions; - When a display other than the stand-by display is shown (other function is running) - When All lock is activated - During Driving mode - During PIM lock is activated...

Page 115: Setting Operation When Message R/F Is Received
Setting operation when Message R/F is received <Incoming Msg. Alert> Select ring tone: ON/ 着信音 1 (Tone 1) Incoming Alert Light: Flash/Ocean Default Vibrator: OFF Ring time: 10 seconds You set how to operate when Message R/F is received. Press d94 on the stand-by display. Press 1 or 2.

Page 116: Checking For Message R/F
Checking for Message R/F <Message Retrieval> You can check whether Message R/F is delivered to i-mode Center while FOMA terminal is out of the service or turned OFF. • Depending on radio wave condition, you may not be able to perform Message Retrieval operations. Press d6 on the stand-by display.

Page 117: Viewing Received Message R/F
Viewing received Message R/F You display Message R/F stored in FOMA terminal. • If received unread Message R/F exists, is indicated on the stand-by display. When FOMA terminal is closed, is indicated on the sub-display. <Example> Displaying MessageR Press d51 on the stand-by display. Page number/number of pages Reception date/time, subject •...

Page 118 Reloading images in Message R/F <Reload> Any unreceived image in Message R/F text can be reloaded. • If "Not display" is set for "Image& Effect Settings", images cannot be received even if reload is attempted. → P55 • Some images may not be displayed even if reload is attempted. Display the message R/F list.

Page 119 Deleting Message R/F You can delete selected message individually, read Message R/F or all Message R/F. • Protected Message R/F cannot be deleted. Even though you perform Delete all, protected MessageR/F remains. Cancel protection first and then delete the desired message. Display the message R/F list.

Page 121: Mail Function
Mail Mail Function ................120 i-mode Mail .................. 127 Short Message (SMS) ..............175 Mail Box ..................190 Setting Mail Function ..............202...

Page 122: Foma Terminal Mail Function
FOMA terminal mail function FOMA terminal provides two mail functions: i-mode Mail and Short Message (SMS). • You must apply to use i-mode Mail. • You can use Short Message (SMS) without applying for i-mode. Send/Receive mail function FOMA terminal → mova i-mode terminal FOMA terminal →...

Page 123 • Of the messages through providers other than above, those from the specified domain(s) are received. → P172 * Messages from NTT DoCoMo's i-mode, i-shot, charge notice service, e-billing charges notification and M-stage visual net are all received. ② Receive/Reject Selected Mail •...

Page 124 ③ Receive/Reject only i-mode Mail • Only messages exchanged between i-mode terminals are accepted (messages through the Internet are rejected)/rejected. → P170 ④ Reject Mass i-mode Mail Senders • The 200th and later i-mode Mail messages sent from one i-mode terminal (including mova) in one day are rejected.

Page 125: Other Convenient Functions
When you cannot receive mail All i-mode Mail received by the i-mode Center is immediately sent to your i-mode terminal. However, when your i-mode terminal is not available for receiving the mail because a video-phone call is taking place, power is not turned on, the terminal is out of the service area, etc., or Receive option setting is ON, i-mode Mail is stored in the i-mode Center.

Page 126 i-motion Mail You can send/receive video files taken with i-motion Mail compatible terminals or downloaded from sites in the form of i-motion Mail (you cannot send video files that is not allowed to attach to mail or output from FOMA terminal). - Sending i-motion Mail →...

Page 127: Short Message (Sms)
■ DECOmail (Decoration mail) You can create and send your original messages by changing the character size and background color and by pasting images in the text as you edit i-mode Mail and enjoy received decorate mail (when decorate mail is received from PCs, operations may not be the same as on PCs because some decorations are not supported by i-mode terminals).

Page 128: Other Convenient Function
When you cannot receive Short Messages (SMS) A Short Message (SMS) sent to FOMA terminal is received by the Short Message Center and sent to FOMA terminal immediately. If FOMA terminal is powered OFF or outside of service and mail cannot be received, the Short Message (SMS) is stored in the Short Message Center.

Page 129: Creating And Sending I-Mode Mail
Creating and sending i-mode Mail <Compose New Mail> You create and send i-mode Mail. • To use the phonebook when Privacy mode is active ("Need auth. to use" set for the phonebook), entry of the security code (four to eight digits) or fingerprint authentication is required. → "Basic" manual P209 Hold down a for over a second on the stand-by display.

Page 130 Select , press , enter the message and press • You can enter up to 5,000 two-byte or 10,000 one-byte characters. • When a file is attached, the number of characters that can be entered is reduced. • You can insert line feeds in the message. Use # to enter line feeds in the 5-touch method.

Page 131 Sending mail to multiple addresses <Add address> i-mode Mail can be sent at the same time to 5 destinations at maximum (simultaneous sending). • The receiver can be one of the three types: (TO), (CC) and (BCC). Enter the address of the other party - In , add an address to which you wish to send the contents of the mail in addition to the direct receiver.

Page 132: Creating And Sending Decomail
Creating and sending DECOmail You can send your own original i-mode Mail created by changing font sizes and/or background color or inserting still images you have shot or preinstalled images ( → P133). There are two ways for decoration: one is to specify the decoration method followed by character entry ( →...

Page 133 Specifying the decoration method followed by character entry You can specify the decoration method followed by character entry. • You can also press m on the mail text entry screen, select "decorate mail" and press to obtain the same result. Display the mail creation screen.

Page 134 ■ Changing font size (Example of decoration 2) ① Press lr to select and press • You can select form "Large", "Standard" or "Small". ② Select the font size, press and enter characters. <"Large" selected> ■ Blinking characters (Example of decoration 3) ①...

Page 135 ■ Inserting separating line (ruled line) (Example of decoration 7) Press lr to select and press Lines (ruled lines) are inserted in the color specified in (Font color). ■ Inserting image (Example of decoration 8) ① Press lr to select and press The folder list of "Image"...

Page 136 Press m8 and check the decoration. You can check the decoration set to the text and accurate number of the remaining byte to use. ■ Changing decoration Press m18, move the cursor to the start position and press Subsequently, follow the procedure from Step 4 in "Decorating characters after specifying the range".

Page 137 Select the decoration method. ■ Changing font color Press 1 , select the color and press The font color is changed. • You can also change the color of lines (ruled lines) inserted by decoration. ■ Changing font size Press 2 and 1 to 3. The font size is changed.

Page 138: Saving I-Mode Mail In Process Of Creation For Sending Later
Saving i-mode Mail in process of creation for sending later i-mode Mail in the process of creation can be saved instead of sending or the saved i-mode Mail can be edited and sent. Saving i-mode Mail in the process of creation i-mode Mail in the process of creation can be saved instead of sending immediately.

Page 139: Sending I-Mode Mail With Still Images, Melodies, Videos/I-Motion
Sending i-mode Mail with still images, melodies, videos/i-motion <Attachment> You send i-mode Mail with still images and melodies attached. You can also send i-motion Mail with video recorded with FOMA terminal. • Attachable file are as shown below: Video / Still image of 10000 Still image larger Item...

Page 140 INFORMATION • When sending a melody, received melody may not be correctly played if the receiver is other than FOMA F900iT or F900i. • Playing i-motion attached to a message on a PC, etc. requires capable software. Visit the DoCoMo Web site for details. → P393...

Page 141 Changing/removing attachments Attachments can be changed or removed. <Example> Removing attachment Display the mail creation screen. • Operation procedure → P127 Select attachment to delete on Compose message screen and press a. A confirmation screen is displayed asking whether to delete. ■...

Page 142: Using Mail Template
Using mail template Mail template is used the same sentence at the beginning of messages or registered frequently used i-mode Mail content to sent similar content many times. By calling, adding to and correcting the mail template, you can easily create i-mode Mail. •...

Page 143 INFORMATION • If read a template under mail edit on which you have edited the mail text, a confirmation screen is displayed asking whether to delete the mail you are currently working on. Select "Yes" and press to save the entry in Unsent messages and set the selected template for the mail creation screen.

Page 144 Changing the contents of a template <Save as template> Set the item to record among the subject, receiver, message and attachment and change the contents of the existing template. You can register more than one receiver. The registered templates can be reset to the defaults. •...

Page 145: Viewing Sent/Unsent I-Mode Mail
Viewing sent/unsent i-mode Mail <Outbox/Unsent messages> Sent i-mode Mail are saved in "Outbox". Unsent messages contains i-mode Mail that were saved without sending or that failed to be sent are save in "Unsent messages". • When Privacy mode is active, the folder list or folders are hidden according to Privacy mode settings for mail. →...

Page 146 Select i-mode Mail to display and press Status icon, Attachment/SMS icon, Mail number/count • Icon definitions: : Sent date and time : TO : CC : BCC : Subject • You can select the font size for sent message. → P197 •...

Page 147: Automatically Receiving I-Mode Mail
Automatically receiving i-mode Mail <Mail auto receive> When there is incoming i-mode Mail, it is automatically received and the screen display and ring tone, vibrator or light alert notify you that i-mode Mail has been received. The received i-mode Mail is saved in the Inbox. Receive i-mode Mail.

Page 148 INFORMATION • When a new i-mode Mail is delivered, you will also receive other i-mode Mail stored in the i-mode Center. • Setting "ON" for Receive option setting allows selective reception of desired messages only without automatically receiving all messages. → P147, P148 •...

Page 149: Setting Not To Receive I-Mode Mail Automatically
Setting not to receive i-mode Mail automatically <Receive option> You set to select and receive i-mode Mail stored in the i-mode Center without receiving automatically. Selecting and receiving only necessary mail <Receive option> You set to check and select subjects of i-mode Mail stored in the i-mode Center and receive only necessary mail.

Page 150 Setting receive option <Receive option setting> Default You can set whether to receive i-mode Mail automatically. Press a95 on the stand-by display. Press 1 or 2. Receive option setting is set. INFORMATION • If you set "ON", delivered i-mode Mail is stored in the i-mode Center and not automatically sent to FOMA terminal.

Page 151: Checking For Mail
Checking for mail <i-mode message> You can check whether i-mode Mail is delivered to i-mode Center while FOMA terminal was out of service or turned OFF. • Depending on radio wave condition, you may not be able to perform "i-mode message" operations. Hold down side key [ ▼...

Page 152: Viewing Received I-Mode Mail
Viewing received i-mode Mail <Inbox> Received i-mode Mail is saved in "Inbox". • When Privacy mode is active, the folder list or folders are hidden according to Privacy mode settings for mail. → "Basic" manual P209 - When "Need auth. to use" set, displaying the folder list requires entry of the security code (four to eight digits) or fingerprint authentication.

Page 153 Select the i-mode Mail and press Status icon, Attachment icon, Mail number/count * You can check which of TO, CC and BCC is applied to you as a recipient. • Icon definitions: : Reception date and time : Sender : Sender that cannot reply to : TO : To (unable to reply) : CC...

Page 154: Replying To Received I-Mode Mail
Replying to received i-mode Mail <Reply> You reply to received i-mode Mail. • You may not be able to reply to some received mail. Press a1 on the stand-by display. The folder list is displayed. Select a folder and press •...

Page 155: Forwarding Received I-Mode Mail
Forwarding received i-mode Mail <Forward> You forward received i-mode Mail to other addresses. • It is forwarded by i-mode Mail. Press a1 on the stand-by display. The folder list is displayed. Select a folder and press The received mail list is displayed. Select i-mode Mail to forward and press a.

Page 156: Displaying And Saving Attached Still Image
Displaying and saving attached still image <Displaying/Saving image> You display and save images attached to received mail. Saved still images can be viewed using "Image" or set for the stand-by display. Displaying still image When a received mail to which still image is attached is displayed, the still image is displayed following to the text.

Page 157 Saving still image You save attached still images as frames or stamps used for editing images. Press a1 on the stand-by display. The folder list is displayed. Select a folder and press The received mail list is displayed. Select i-mode Mail with a still image attached and press The received mail detail information screen is displayed.

Page 158 Checking title of still image <Check title> Check the title given to a still image. Press a1 on the stand-by display. The folder list is displayed. Select a folder and press The received mail list is displayed. Select i-mode Mail with a still image attached and press Received mail detail screen is displayed.

Page 159: Playing And Saving Attached Melody
You play and save melodies attached to received mail. Saved melodies can be played with "Melody" or used as a ring tone. • If the sender uses a terminal other than FOMA F900iT and F900i, the received melody may not be played correctly.

Page 160 Saving melody Press a1 on the stand-by display. The folder list is displayed. Select a folder and press The received mail list is displayed. Select the i-mode Mail with a melody attached and press The received mail detail information screen is displayed. Select the melody to be saved and press m62.

Page 161 Checking title of melody <Check title> Check the title given to the melody. Press a1 on the stand-by display. The folder list is displayed. Select a folder and press The received mail list is displayed. Select i-mode Mail with a melody attached and press The received mail detail information screen is displayed.

Page 162: Receiving And Playing I-Motion
Receiving and playing i-motion <Receiving/Playing i-motion> When the sender attaches a video/i-motion to mail, it is stored at the i-motion Mail Center and an icon of the i-motion is inserted in the received mail (i-motion Mail). Select the icon item to receive the i-motion and play it. •...

Page 163 Press p. mode" folder of "i-motion". → P270 i-motion is saved in " Select "Back" and press The mail detail information screen reappears. INFORMATION • You can play video/i-motion files attached to sent mail as well. Not that you cannot play the video/i-motion if it has been deleted from your FOMA terminal.

Page 164: Deleting Attachment
Deleting attachment <Delete attachment> You can delete still images and melodies attached to received mail. • Melodies displayed in the message cannot be deleted. • You cannot delete links to play i-motion or start software. <Example> Deleting attached still image Press a1 on the stand-by display.

Page 165: Setting Whether To Receive Attachments
Setting whether to receive attachments <Incoming mail attach> Default Image : Receive Melody : Receive You set whether to receive still images and melodies attached to i-mode Mail. Press a96 on the stand-by display. Select the item to set and press to set it.

Page 166: Setting I-Mode Mail Address And Mail Rejection
Setting i-mode Mail address and mail rejection <Mail Settings> Connect to the i-mode Center and set i-mode Mail address, rejection, etc. • Mail settings can only be configured from FOMA terminal. • For more information, see "FOMA i-MODE User’s Manual". Changing mail address You can change the i-mode Mail address as you like.

Page 167 Select the "1st preference" field, press , enter the desired mail address and press • Enter the portion of the e-mail address that will precede symbol @. In the same way as Step 4, enter second and third preferences. • The second and third choices are optional. Select "Enter i-mode Password"...

Page 168 Select "Confirm Mail Address" and press The mail address currently set is displayed. Registering secret code When you use "own phone number@docomo.ne.jp" as an i-mode Mail address, if a secret code has been registered, mail without the registered secret code (four digits) is not received.

Page 169 INFORMATION • Messages collected at the i-mode Center before Secrecy setting is made can still be received after the setting. • To cancel the secret code registration, perform Change Mail Address ( → P164) or Reset Mail Address ( → See below). •...

Page 170 Restricting size of i-mode Mail you receive You place restrictions on the data volume of i-mode Mail you receive. • It is set to "5000 two-byte characters" by default. Display Mail Settings screen from iMenu. • Operation procedure → P164 Select "Limit Mail Size", press , select number of characters to be sent and press...

Page 171 Rejecting reception of i-mode Mail You can use any of the following methods to reject i-mode Mail: • Reject Unsolicited Ad Mail You can prevent downloading of mail items that are sent without your consent for the purposes of advertisement. "Reject"...

Page 172 Select "Other Settings" in the "Receiving Mail", press select "Reject Mass i-mode Mail Senders", press select an item, and press • When selected, changes to Select i-mode password column, press , an input i-mode password, and press • Input i-mode password is displayed by " ＊ ". •...

Page 173 INFORMATION • Messages collected at the i-mode Center before setting Reject/Receive only i-mode mail can still be received after the setting. • If you set "Receive only i-mode Mail", you may not be able to receive desired mail distribution. • Depending on the settings, sending i-mode Mail resulting in an error may not cause an error message indicating wrong address to be received.

Page 174 Receive Mail from Selected Domains Display Mail Settings screen from iMenu. • Operation procedure → P164 Select "Reject/Receive Mail Settings", press , select "Receive Mail from Selected Domains" and press • When selecting, changes to To cancel the current settings registered, select "Cancel setting"...

Page 175 Checking current rejection setting You check the current rejection setting. Display Mail Settings screen from iMenu. • Operation procedure → P164 Select "Confirm Settings" and press You can check the current rejection setting. Suspending i-mode Mail function If you do not use the i-mode Mail function, you can suspend the mail function at the i-mode Center.

Page 176 Select "Enter i-mode Password" field, press , enter the i-mode password and press • The entered password is masked with " ＊ ". • The i-mode password is set to "0000" by default. Select "Select" and press The mail function is suspended. •...

Page 177: Creating And Sending Short Message (Sms)
Creating and sending Short Message (SMS) <Compose SMS> Creating and sending Short Messages (SMS) • If you use one-byte katakana and pictograms, the receiver may not be able to display them correctly. • To use the phonebook when Privacy mode is active ("Need auth. to use" set for the phonebook), entry of the security code (four to eight digits) or fingerprint authentication is required.

Page 178 INFORMATION • Depending on the model of FOMA terminal of other party, "some pictograms" ( → "Basic" manual P318) may not be displayed correctly. • You can use fixed phrases to enter face fonts, greetings and replies. → "Basic" manual P319 •...

Page 179: Saving Short Message (Sms) In Process Of Creation For Sending Later
Saving Short Message (SMS) in process of creation for sending later Short Messages (SMS) in the process of creation can be saved instead of sending or the saved Short Message (SMS) can be edited and sent. Saving Short Message (SMS) during creation You can save a Short Message (SMS) you created without sending it.

Page 180: Viewing Sent/Unsent Short Message (Sms)
Viewing sent/unsent Short Message (SMS) <Outbox/Unsent messages> Sent Short Messages (SMS) are saved in "Outbox". Unsent messages contains Short Messages (SMS) that were saved in "Unsent messages" without sending or that failed to be sent. • When Privacy mode is active, the folder list or folders are hidden according to Privacy mode settings for mail. →...

Page 181 INFORMATION • You can select phone numbers, mail addresses or URLs from the detail info screen to save in the phonebook, and also select URLs to save in Bookmarks. → P200, P201 • You can make calls, send i-mode Mail or display sites using phone numbers, mail addresses or URLs on the detail info screen.

Page 182: Receiving Short Message (Sms) Automatically
Receiving Short Message (SMS) automatically <Receive SMS> When a Short Message (SMS) is delivered, it is automatically received and the screen display and ring tone, vibrator, or incoming light notify you that a Short Message (SMS) has been received. The received Short Message (SMS) is saved in Inbox. Receive Short Message (SMS).

Page 183: Inquiring Whether There Are Short Messages (Sms) Present
INFORMATION • Short Messages (SMSs) are automatically received but the reception screen or reception result screen is not displayed and incoming message ring alert/alert light is not activated in the following conditions; - When a display other than the stand-by display is shown (other function is running) - When All lock is activated - During Driving mode - During PIM lock...

Page 184: Viewing Received Short Message (Sms)
Viewing received Short Message (SMS) <Inbox> Received Short Message (SMS) is saved in "Inbox". • When Privacy mode is active, the folder list or folders are hidden according to Privacy mode settings for mail. → "Basic" manual P209 - When "Need auth. to use" set, displaying the folder list requires entry of the security code (four to eight digits) or fingerprint authentication.

Page 185 Select Short Message (SMS) and press Status icon, SMS icon, Mail number/count Reception date and time, Sender, Subject • Icon definitions: : Receiver : Reception date and time : Sender : Sender that cannot reply to : Subject "Received SMS" "Delivered report" •...

Page 186: Replying To Received Short Message (Sms)
Replying to received Short Message (SMS) <Reply> You can reply to received Short Messages (SMS). • You cannot reply to Short Messages (SMS) for which "User unset", "Payphone" or "Not support" is displayed in the sender field. Press a1 on the stand-by display. The folder list is displayed.

Page 187: Forwarding Received Short Message (Sms)
Forwarding received Short Message (SMS) <Forward> You forward the received Short Messages (SMS) to other receivers. • It is forwarded by Short Message (SMS). Press a1 on the stand-by display. The folder list is displayed. Select a folder and press The received mail list is displayed.

Page 188: Saving Short Message (Sms) On Uim
Saving Short Message (SMS) on UIM <UIM SMS> You can save sent and received Short Messages (SMS) on the UIM by moving/ copying them. Displaying Short Message (SMS) on UIM You display Short Messages (SMS) stored on the UIM. <Example> Displaying a received Short Message (SMS) Press a71 on the stand-by display.

Page 189 Moving/Copying Short Messages (SMS) into UIM You move or copy Short Messages (SMS) stored in the Inbox or Outbox to the UIM. • Up to 20 sent/received short messages (SMS) can be saved on the UIM. • i-mode Mail cannot be saved on the UIM. •...

Page 190 Moving/Copying Short Message (SMS) in UIM to FOMA terminal (Terminal) You move or copy Short Message (SMS) from UIM to "Inbox" or "Outbox" of FOMA terminal (Terminal). • When you move or copy a sent Short Message (SMS), the corresponding delivery report is moved or copied to "Inbox"...

Page 191 Deleting Short Message (SMS) from UIM You can delete Short Message (SMS) one by one or all at once. You can also delete only all Delivery reports at once. • When you delete a sent Short Message (SMS), the corresponding delivery reports, if any, are also deleted from the UIM.

Page 192: Managing Messages
Managing messages The FOMA terminal provides various functions that use Mail more conveniently. Creating/deleting mail folders The folders for saving messages can be created and such mail folders can be deleted. • When Privacy mode is active ("Hide secrecy data" set for mail), folders cannot be created or deleted. →...

Page 193 Deleting folders • "Inbox", "Outbox" and "Unsent messages" folders set by default cannot be deleted. • No folder for Message i αppli can be deleted unless the software for the folder is deleted. → P92 <Example> Deleting Inbox folder Press a1 on the stand-by display. A list of Inbox folders is displayed.

Page 194 Protecting mail Mail is protected so that it is not overwritten, even when there is no available storage space of Received messages, Sent messages or Unsent messages. • Up to 500 received messages and up to 100 sent or unsent messages can be protected. •...

Page 195 Deleting mail You can delete unnecessary mail from "Inbox", "Unsent messages" and "Outbox". • Protected mail cannot be deleted. When deleting all mail at a time, protected mail remains undeleted even if it matches the specified criteria. Cancel protection before deleting. Deleting received message •...

Page 196 Deleting sent message and unsent message • You can delete messages in the following method: ○ : Available − : Unavailable Screen for starting operation Deleting method Message deleted Folder list Mail list Details ○ − − All items All messages ○...

Page 197 Press a991 on the stand-by display. Press 1 or 2. The type of display is set. Checking the number of mail items <Msgs. In Folder> The number of received/unsent/sent messages saved can be checked for each folder. <Example> Checking the number of received messages saved Press a1 on the stand-by display.

Page 198 Press m5. • You can select "By date", "By sender" or "By title" for the sent message. Select the sort type and press The sorting order of the message list changes temporarily. INFORMATION • When you exit the display of the message list in Inbox or Outbox, the sorting order returns to "By date".

Page 199 Changing mail font size <Font size> Default Medium (standard) You can change the font size in the display of received message , sent message and mail template, etc. • The font size cannot be changed while composing (editing) messages. <Large> <Medium (Standard)>...

Page 200 Checking mail address <Display address> You can display the mail address of the sender or receiver of received, sent and unsent message. You can view a complete mail address by this method when not all of the address can be displayed or the address is saved in the phonebook and only the name is displayed.

Page 201: Useful Functions
Useful functions When there is a phone number, mail address or URL in a displayed i-mode Mail or Short Message (SMS), you can copy the message, make a voice/video-phone call (Phone To (AV Phone To)), compose i-mode Mail (Mail To) or display a site (Web To) by selecting the displayed item.

Page 202 Press m2. Select the copy type and press • Specify the copy range for the message to copy. Operation procedure → P51 Step 2 Display the character entry screen to insert the data and paste the characters at the location. The copied character is pasted.

Page 203 Press 1 or 2. • To add as a new entry, press 1. The operations that follow are the same as saving from sites ( → P52 Step 3 and the following). • To update the entry, press 2. The operations that follow are the same as saving from sites ( →...

Page 204: Setting Operation When Mail Is Received
Setting operation when mail is received <Incoming Msg. Settings> Select mail ring tone: ON/ 着信音 1 (Tone 1) Incoming Alert Light: Flash/Ocean Default Set vibrator alert: OFF Ring time: 10 seconds You set the operation that is performed when i-mode Mail or Short Message (SMS) is received.

Page 205: Sorting Received Mail Automatically Into Designated Folders
Sorting received mail automatically into designated folders <Sort mail> Received i-mode Mails and Short Messages (SMS) can be sorted into the specified folder automatically according to the set criteria. • Up to 30 criteria can be registered. • To use the phonebook when Privacy mode is active ("Need auth. to use" set for the phonebook), entry of the security code (four to eight digits) or fingerprint authentication is required.

Page 206 Press m1. Criteria Description Mail address Sorts received mail sent from the specified mail address. The mail address specifies the entire address including the character following the @ sign (up to 50 one-byte characters). You cannot sort mail by specifying part of the mail address.

Page 207 ■ Specifying subject ① Press 2. and press p. ② Enter the subject, press ■ Specifying phonebook No. ① Press 3. ② Select phonebook and press ■ Specifying a group ① Press 4. ② Press 1 or 2. ③ Select the group to specify and press ■...

Page 208 Select the destination folder and press • The following operations are required when Privacy mode is active: - When "Need auth. to use" is set, enter the security code (four to eight digits) or authenticate your fingerprint. → "Basic" manual P209 - To sort into a folder with Privacy of Folder Settings ( →...

Page 209: Registering Mail Signatures
Registering mail signatures <Signature> Default You can register the signature added to message of i-mode Mail or Short Messages (SMS). You can also set whether to automatically insert the signature when you compose mail. Press a93 on the stand-by display. and 1 or 2.

Page 210: Setting Whether To Quote Message When Reply
Setting whether to quote message when reply <Mail Reply Format> Default Quote: Yes Quote characters: > You set whether to quote the body of the message when you reply to an i-mode Mail or Short Message (SMS). In addition, you set the type of quote characters that are added to the quoted message.

Page 211: Setting Various Conditions Of Short Message (Sms)
Setting various conditions of Short Message (SMS) <SMS Settings> Font type: Japanese Delivery report: Not request Keep in SMS center: 3 days Default SMSC: DoCoMo Type of number: International You set various usage conditions for Short Message Service (SMS). Usually, you do not need to change SMSC, Address and Type of Number settings. Press a97 on the stand-by display.

Page 213 Multimedia Camera ..................212 Image .................... 245 i-motion ..................270 Melody ..................288...

Page 214: Before Using Camera
Before using camera Recorded still images and videos available • Recorded still images and videos can be displayed and played on FOMA terminal and can also be sent via i-mode Mail or data transfer to other FOMA terminals, or via e-mail (PCs or other company's mobile phones, etc.).

Page 215 • When miniSD memory card is set as the destination, do not remove the miniSD memory card while using the camera. It may damage the miniSD or terminal. • When the free space of the miniSD memory card becomes small, shooting may not be available. Check that the miniSD memory card has a sufficient free space before using it for shoot.

Page 216: Start/End Camera
Start/end Camera To shoot still image or video, start the Camera or Video Camera first, and then display the still image shooting screen or the video recording screen. How to start/end the still image shooting screen or the video recording screen depending on the operation state of FOMA terminal is described below.

Page 217 Starting/ending Camera in turned state Start/end Camera in the turned state. • When you make FOMA terminal in the turned state during stand-by, Touch Menu is displayed. Start Camera after tapping and the stand-by display reappears. Shooting still images Hold down side key [ ] for over a second on the stand-by display.

Page 218: Using Camera To Shoot Still Images
Using camera to Shoot still images <Camera> Various modes are available for shooting still images. • You cannot disable the countdown sound and the confirmation sound of shooting (shutter sound). They are emitted even when Ring Volume is set to "Mute" or Silent mode is set to ON. •...

Page 219 Function name Description Frame settings : Set : Cancel Available → P237 & Photo-light : ON : OFF → P233 Available This icon is displayed during shooting with the out-camera. Continuous : Off (1) : Manual : Auto Available shoot → P221 Quality →...

Page 220 ■ About still image file File format JPEG Still images can be attached to i-mode Mail and sent to i-mode Image 96 × 72 (phonebook size) terminal or PCs, and can also be imported to PCs or other size 128 × 96 (Sub-QCIF) compatible terminals by using a miniSD memory card and 176 ×...

Page 221: Shooting Still Images
<In accompanying miniSD memory card (16MB)> Unit: Number of images 96 × 72 128 × 96 176 × 144 240 × 320 352 × 288 640 × 480 480 × 640 960 × Image size Quality 1280 Economy Approx. Approx. Approx.

Page 222 Press or side key [ The shot images are saved in "Camera" folder of "Image." → P245 When "miniSD card" is selected as the destination, the image is saved in "My Picture" of "miniSD card". → P312 ■ Checking still image immediately after save ①...

Page 223 Press or side key [ The shot image is saved in "Camera" folder of "Image". → P245 • Operations during shooting and saving are the same to the normal shooting. → P219 INFORMATION • The duration of time before shooting can be changed. → P223 •...

Page 224 Manual continuous shooting Pictures can be continuously taken until the number reaches the Continuous shoot pictures setting in "Still image settings". → P223 Press m52 on the still image shooting screen. The icon for continuous shooting is switched from • You can press 7 to set continuous shooting. You can tap to set continuous shooting.

Page 225: Setting Image Size & Quality For Still Images
Setting image size & quality for still images <Still Image Settings> Image size: 240 × 320 Quality: Standard Shooting date/time: None Size restrictions: 9000 bytes Self -timer duration: 10 seconds Serial shoot duration: Fast Default Serial shoot pictures: 5 Auto save: No Save to: Terminal Camera time-out: 1 minutes Shutter sound: Standard Set lighting: Always on You can set the items for shooting still images.

Page 226: Recording Videos Using Video Camera
Press p. The setting is registered. INFORMATION • For Still image settings, the default settings are not restored by reset. • Even if the shooting tone is specified from "Shutter sound", you cannot check the tone in Silent mode. Recording videos using video camera <Video Camera> Various modes are available for recording videos.

Page 227 Function name Description " Zoom → P235 : Normal : 2 times : 4 times* : 6 times* : 8 times* : 10 times* Available : 12 times* : 16 times* *For recording with the out-camera only Brightness : –2 : –1 : ±0 : +1...

Page 228 • Default settings for Video Settings Item Default setting Item Default setting Quality Standard Auto save Recording Type Video + Voice Save to: Terminal Size restrictions Msg attach Camera time-out 1 min. 176 × 144 Size Shutter sound Standard Self-timer duration 10 sec.

Page 229: Recording Videos
<In accompanying miniSD memory card (16MB)> I: Image, S: Sound File size restriction Mail attachment (95Kbytes) 300KB No restriction 128 × 96 176 × 144 128 × 96 176 × 144 128 × 96 176 × 144 Item Size Recording Type I only I + S I only...

Page 230 Press p or hold down side key [ ] for over a second. End sound is stopped, recording is finished, and confirmation screen is displayed. • If the file size of the video reaches a limit value during recording, the recording finishes automatically. Video up to the finish time are objects for saving.

Page 231 INFORMATION • Even if you record video viewing in mirror image, the video is saved in normal image. • Video recorded and saved by FOMA terminal can also be played in PCs. → P393 • Even if Size restrictions is set to "300 Kbytes" for recording, the size may not be reached depending on video you recorded.

Page 232 Press p or hold down side key [ ] for over a second and press or side key [ ] on the confirmation screen. After end sound is heard, shooting is finished. • Operation during recording or saving is the same to the normal recording. → P227 INFORMATION •...

Page 233: Setting Video Quality And Recording Type
INFORMATION • Use the terminal in the open state, as the voice is recorded trough a microphone. And, do not cover the microphone. • Record the voice in quiet place possible where environmental noise is little. • Video recorded and saved by FOMA terminal can also be played in PCs. → P393 •...

Page 234 Press m6 on the video recording screen. Item Description Quality Sets the quality of video files saved after video recording. • "High quality" provides the highest quality. The maximum duration of recording depends on the quality. → P226 • If Quality is set to "Long", you cannot set Recording Type to "Voice only".

Page 235: Changing Settings For Shooting
Changing settings for shooting Settings can be changed for shooting. • The following items that can be set. Item Page Item Page Switching camera mode Below Adjusting color density* P237 Using photo-light Below Framing P237 Switching screen display P234 Setting image size* P238 (for shooting still image only) P239...

Page 236 Switching screen display Switch between display modes of shooting screen. • Switching screen display is not available for video recording screen. <Example> Image size "Stand-by size 240 × 320" • The size of the image displayed on the screen differs depending on the set image size( →...

Page 237: Applying Special Effects
Zooming Select the magnification. • During shooting with the out-camera, the display magnification can be selected from 7 options between 2x and 16x. Up to 2x zoom is available for shooting with in-camera. • This operation can be performed only while in stand-by for shooting, in shooting or in pause in shooting a video.

Page 238 Press lr to select the icon of effect on the still image shooting screen or the recording video screen. • You can also press 4 to select the icon of effect. Icon of effect Effect name Press ud or side key [ ▲▼ ] select an effect and press The effect is set.

Page 239 Adjusting color density The color density for shooting still image or video can be adjusted. • Adjustments can be done in five tones. • This operation can be performed only while in stand-by for shooting or in pause in video recording. Press lr to select the icon of color density on the still image shooting screen or the recording video screen.

Page 240 Press ud or side key [ ▲▼ ] to select an effect and press The frame is set. • Each time you press 5, the types of frame are switched. The types of frame are also switched by tapping icon of frame. or hold down 5 Select Cancel ( ) to cancel the frame and press more than 1 second for releasing the frame.

Page 241 Setting still image quality Set the quality of image files saved after still image shooting are selected from 3 options. • You can select one of the 3 types. • This operation can be performed only while in stand-by for shooting. Press lr to select the icon of quality on the still image shooting screen.

Page 242 Setting size restrictions Sets the size of files to be saved after shooting. • You can select one of 3-type still images and 2-type moving images (3 types when the "Save to:" setting is "miniSD card"). • This operation can be performed only while in stand-by for shooting. Press lr to select the icon of size restrictions on the still image shooting screen or the recording video screen.

Page 243: Sending Shot Image To The Other Party During Call
Sending shot image to the other party during call <One-Shot Message> When you shoot a still image while talking on the phone, you can attach it to i-mode Mail and then send it to the other party. • This function is available only during voice calls. •...

Page 244: Using Bar Code Reader
Using bar code reader Scanning JAN and QR codes with a camera allows use of the Phone To (AV Phone To), Mail To and Web To functions, bookmark registration, phonebook registration, character display, etc. It also allows copying and pasting of characters. •...

Page 245: Scanning Bar Code
Scanning bar code • The types of read data include the following. - Phonebook registration data - Mail interaction data - Bookmark registration data - i αppli interaction data - Text display data - Contents data • You can store up to 5 scanned data. Press mp63 on the stand-by display.

Page 246 ■ Displaying/saving still image files ① Select a sill image file and press ② Select "Display" or "Save" and press • When select "Save", still image files are saved in "Data transfer" folder of "Image". • Concatenated code The Squares showing the total number of QR codes required for concatenation is displayed and completion, and the incompletion of scanning is indicated in blue and white.

Page 247: Displaying Image
Displaying image You display images stored in "Image" of FOMA terminal. • Images are classified and stored in one of 6 fixed folders. Folder name Type of image Camera Image shot with Still camera mode Image obtained from site or i-mode Mail Edited image Image copied, image edited and saved or freehand memo Item...

Page 248 Select the image to display and press Title (Displayname) All images in a folder Use ud to display the previous or next photo during image display. Still images larger than the screen can be scrolled for display with udlr by pressing Alternatively, tapping enables you to point across, drag and scroll the images.

Page 249: Using Image
Using image You can display image on the stand-by display or attach image to i-mode Mail. Attaching still images to i-mode Mail You compose i-mode Mail with attach a still image. • i-mode Mail cannot be created from images that are not attachable. → P137 Press m31 on the stand-by display, select a folder and press The image list is displayed.

Page 250 ② Select "Yes" and press • When i αppli stand-by display is set, a confirmation screen is displayed asking whether to cancel. To set the selected image, select "Yes" and press • When animation or continuous shots are set as a stand-by display, the image is automatically played when you turn the power on or open FOMA terminal in stand-by.

Page 251 ■ Registering as the video-phone screen ① Press 5. ② Press 1 to 4. The image is set. INFORMATION • Images larger than 176 × 144 (dots) or not permitted to output from the FOMA terminal cannot be set as the video-phone screen. •...

Page 252: Creating Animation
Creating animation Multiple still images are selected in the same folder and they are registered as an animation. • Up to five still images can be registered. • When you create animation, cannot be displayed or edited individually. Press m31 on the stand-by display, select a folder and press The image list is displayed.

Page 253: Displaying Detail Information
Displaying detail information <Detail Information> You display detail information about images. • The following items are displayed. - Title* - File name* - Type - File restriction* - Format ("– – –" is displayed for Flash Graphics) - Display size (Not displayed for Flash Graphics.) - File size (Bytes) - Created date &...

Page 254 Select an image with detail information to change and press m32. Item Description Title Set titles required for management in the terminal. The set titles are displayed on the image list and used for sorting, etc. • You can enter up to 36 two-byte or one-byte characters.

Page 255: Editing Still Images
Editing still images You edit still images. • The following images cannot be edited. - Animations, Continuous shots, Image in "Item" folder - Still images upon which restrictions are placed that prevent their being attached to mail or output from FOMA terminal (except still images whose File restriction is set to "File restricted"...

Page 256: Changing Image Size
INFORMATION • Items available for editing depend on the still image size. Available: ○ Unavailable: − Editing items Horizontal/vertical (vertical/horizontal) length Still image up to 240 × ○ * ○ ○ ○ ○ ○ ○ ○ ○ ○ 320 dots Still image larger than ○...

Page 257 ■ For "Zoom in/out" ① Press 1. Actual size ② Press lr. The width is increased or decreased in increments of 5% with the horizontal to vertical ratio maintained. Pressing mp increases or decreases the width in increments of 20%. •...

Page 258 ③ Press udlr, adjust the clipping position and press Point inside the clipping frame, drag to the clipping position and press determine the position. Pressing p switches the height and width of the clipping frame. Pressing t switches between clipping sizes. Pressing m allows range specification.

Page 259 ■ For "Lighter/Darker" ① Press 1. ② Press lr, adjust the brightness and press The brightness is adjusted and the still image editing screen reappears. Pressing p maximizes the brightness and m minimizes the brightness. ■ For "Mono-tone" or "Sepia" Press 2 or 3.

Page 260 Adding frame to still image • Flames set by default → P261 Press 5. • A frame of the same display size as the image being edited is displayed. However, an image set for Use as frame is displayed regardless of the display size. Select the frame and press Press ud to switch frames .

Page 261 Press udlr and adjust the location to past stamp and press A beep sound is heard and stamp is pasted. You can adjust the stamp location by dragging. The stamp is pasted where you released the stylus pen. • You can paste stamp in other locations continuously. Press m to cancel the stamp function.

Page 262 Press p. The still image to past the text is saved and the image editing screen reappears. INFORMATION • Entering characters → "Basic" manual P309 Cutting still image Press 8. Press ud lr and then press adjusting the location of The cutout still image is registered.

Page 263 Frames/Icons list The following flames and stamps are registered by default. • A still image is put in each area. • Flames - Fit to stand-by size (240 × 320 dots) - 176 × 144 dots • Stamps ...

Page 264 Attaching freehand memo to still image Write memos on the still images using a stylus pen. Press m31 on the stand-by display, select a folder and then press A list of images appears. Select an image to be edited and then press p. A still image edit screen appears.

Page 265 Correcting still image You perform the corrections. Press m31 on the stand-by display, select a folder and press The image list is displayed. Select a still image to edit and press p. The still image editing screen is displayed. Press p. The current correction mode is indicated in the upper right-hand corner of the screen.

Page 266: Using Albums
Using albums <Image album> Images are classified based on event or genre and created an album to store. Creating album • You can create 100 albums. • You cannot change the name of fixed folder ( → P245) registered by default. Press m31 on the stand-by display.

Page 267 Moving/Copying images to album Move an image saved in a fixed folder ( → P245) to an album, move between albums and copy the image. Moving images You move images to a created album. • The operation may differ depending on the type of folder in which the images are stored. Original folder Possible operation Description...

Page 268 ■ Moving an image back to fixed folder from album ① Press m31 on the stand-by display screen, select an album and press Image list is displayed. ② Select an image and press m53. • To move back all images in the album, press m54. ③...

Page 269: Configuring "Image"
Configuring "Image" <Settings> View format: Display 12 icons Display title: Yes Display number : Yes Default Display comments: Yes Scale up image: No Scale down image: Yes You control how the Image functions. Press m31 on the stand-by display. The folder list is displayed. Press m4.

Page 270: Deleting Image
Deleting image You can delete images one at a time or all the images in the folder at once. • You cannot delete images in "Preinstall" folder. Press m31 on the stand-by display, select a folder and press The image list is displayed. Select the image to delete and press m61.

Page 271: Sorting Images
Sorting images <Sort> Default Sort criteria: Saved date & time Order: Descending Sorting of the image list is changed. Press m31 on the stand-by display, select folder and press The image list is displayed. Press m7. Item Description Sort criteria Selects the sequence to sort from "Title", "Saved date &...

Page 272: Playing Video/I-Motion
Playing video/i-motion You play video/i-motion that are saved in "i-motion" of FOMA terminal and miniSD memory card. • Videos/i-motion are classified into the following five fixed folders for saving: Folder name Type of video/i-motion Camera Videos or Chara-den shot with the camera mode Videos/i-motion obtained from sites or i-motion mail Edited movie...

Page 273 Select the video/i-motion to play and press The video/i-motion is played. • The meanings of the icons are as shown below. Playing : Playing : In stop condition : In pause Play bar Displays the progress of playing. Playing Displays the current duration of playing (less time than 10 hours).

Page 274 INFORMATION • Maximum number of videos/i-motion saved → P16 • The folder structure of miniSD memory card → P311 • When video/i-motion has been saved, images for Display 12 icons may not be available due to the effect of other application. In that case, is indicated.

Page 275: Using Video/I-Motion
Using video/i-motion You display video/i-motion on the stand-by display or attach video/i-motion to i-mode Mail. Attaching video/i-motion to i-mode Mail (i-motion mail) Video/i-motion is attached to i-mode Mail. • i-mode Mail cannot be created from videos/i-motion that are not attachable. → P137 Press m32 on the stand-by display, select a folder and press Video/i-motion list is displayed.

Page 276 Setting video/i-motion for stand-by display screen/phonebook A video/i-motion can be set for the stand-by display screen, phonebook, movie ringtone, etc. • Movie ringtone → "Basic" manual P176 • To use the phonebook when Privacy mode is active ("Need auth. to use" set for the phonebook), entry of the security code (four to eight digits) or fingerprint authentication is required.

Page 277 ② Select a phonebook data and press • The selected video/i-motion is registered. • If an image has already been registered, video/i-motion is replaced. ③ Confirm the entry and save. • Save in phonebook → "Basic" manual P116 (Step 3) ■...

Page 278: Displaying Detail Information
Displaying detail information <Detail Information> You display detail information about video/i-motion. • The following items are displayed. - Title (Displayname)* - Title (Original) - File name* - File restriction* - Copyright* - Creator* - Format - Sound - Display size - File size (KBytes) - Duration - Created date &...

Page 279 Select the video/i-motion to set detail information and press m32. Item Description Title Set titles required for management in the (Displayname) terminal. The set titles are displayed on the video/i-motion list and used for sorting, etc. You can enter up to 36 two-byte or one-byte characters.

Page 280: Editing Video/I-Motion
Editing video/i-motion Editing video shot by your terminal or video/i-motion with "File unrestricted" setting. • An edited still image/video is saved using same name of original video as title. It is saved using a file name that reflects the edited and saved date/time (e.g. "20040712123456" for July 12, 2004 12:34:56). Creating snapshot from video/i-motion You can capture an image in the video during playing and save it.

Page 281 Press (start position) and press (end position) at the clip position. • You cannot change the start position. Press The clipped video/i-motion is saved. Edited video/i-motion from a fixed folder is saved in "Edited image" folder and edited video/i-motion from an album is saved in the same album. → P270 •...

Page 282 INFORMATION • More than one image can be clipped out of the same video/i-motion for saving. • Ticker may be deleted depending on the clipping position. • The resulted file size of video/i-motion which was edited using "By size" may become smaller than the specified size.

Page 283 Select "Yes" and press Select Ticker field, press , enter the characters to be displayed as ticker and press • You can enter up to 20 two-byte or 40 one-byte characters. ■ Decorating ticker ① Press m. Item Description background color Specifies the color of the background of the ticker displayed.

Page 284: Using Album
Using album <i-motion Album> Albums for storing videos/i-motion can be created. Videos/i-motion can be classified by event, genre, etc. Creating album • You can create up to 10 albums. • You cannot change the name of fixed folder ( → P270) registered by default. Press m32 on the stand-by display.

Page 285 Moving/copying video/i-motion to album Move video/i-motion saved in fixed folder ( → P270) to album, move video/i-motion between albums and copy video/i-motion. Moving i-motion to album You move a video/i-motion to created album. • The operation may differ depending on the type of folder in which the video/i-motion is saved. Original folder Possible operation Description...

Page 286 Copying video/i-motion Make a copy of the selected video/i-motion. • i-motion for which File restriction is set (not including video recorded with your terminal) or Restriction is set cannot be copied. Press m32 on the stand-by display, select a folder and press The video/i-motion list is displayed.

Page 287: Configuring "I-Motion"
Configuring "i-motion" <Settings> View format: Display 12 icons Size adjustment: Normal Default Display light: Always on Volume: Level 3 You control how "i-motion" functions. Press m32 on the stand-by display. The folder list is displayed. Press m4. Item Description View format Specifies the list display format of i-motion.

Page 288: Deleting Video/I-Motion
Deleting video/i-motion You delete video/i-motion one at a time or all of them in the folder at once. • If you delete the default video that is saved in FOMA terminal, you cannot delete it. Press m32 on the stand-by display, select a folder and press The video/i-motion list is displayed.

Page 289: Sorting Video/I-Motion
Sorting video/i-motion <Sort> Default Sort criteria: Saved date & time Order: Descending Sorting of the video/i-motion list is changed. Press m32 on the stand-by display, select a folder and press Video/i-motion list is displayed. Press m7. Item Description Sort criteria Selects the sequence to sort from "Title (Displayname)", "Saved date &...

Page 290: Playing Melody
Playing melody You can play melody stored in "Melody" of FOMA terminal. • Melodies are stored in three fixed folders. Category Melody type mode Melodies downloaded from a site or i-mode Mail. Preinstalled Melodies restored in FOMA terminal. Data Transfer Melodies received via infrared communication, Melody copied from miniSD memory card.

Page 291 Select the melody to play and press Melody number/Number of melodies in folder Title (Displayname) of melody being played Background images (you can switch to your favorite image → P297) A progress bar indicates the current playing point. The current volume is displayed The melody is played.

Page 292: Using Melody
Using melody You set a melody for the ring tone or attach a melody to i-mode Mail. Creating i-mode Mail with melody attachments You attach melodies to i-mode Mail. • You cannot create i-mode mail from a melody that cannot be attached. → P137 •...

Page 293 Select the item to set. ■ Setting as Ring alert, Mail ring alert, Msg. Req. alert/Msg. Free alert, On- hold tone or Video call alert Press 1 to 6. Melody is set as the specified tone. ■ Setting as Memory ring alert ①...

Page 294: Viewing Detail Information
Viewing detail Information <Detail Information> Detail information on melodies can be viewed. • The following items are displayed: - Title (Displayname)* - Title (Original) - File name* - File restriction* - File Format - File size (KBytes) - Playing time - Created date &...

Page 295 Changing detail information <Edit Detail Info.> You change detail information of a melody. • You cannot change detail information of pre-installed melodies except titles (Displayname) by default. Press m33 on the stand-by display, select a folder and press The melody list is displayed. Select a melody to change detail information and press m32.

Page 296: Using Album
Using album <Melody Album> You arrange your favorite melodies on a genre or artist basis. Creating album • You can create up to 10 albums. • You cannot change the name of fixed folder ( → P288) registered by default. Press m33 on the stand-by display.

Page 297 Moving melody to album You can move melodies stored in fixed folder ( → P288) to album. • The operation may differ depending on the type of folder in which the melodies are saved. Original folder Possible operation Explanation mode Move to album Melodies can be moved to the specified album (Cannot be moved to except Album).

Page 298 Playing album You can play all melodies in an album in succession. • You cannot play melodies according to the fixed folder ( → P288) registered by default. Press m33 on the stand-by display. The folder list is displayed. Select a melody to play and press m4. Melody number/Number of melodies in album Title (Displayname) of melodies being played Background images (you can switch to any image.

Page 299: Setting Melody
Setting Melody <Settings> Volume: Level 3 Lighting pattern: Flash Lighting color: Ocean Vibrator: OFF Default Play position: Play all Play background: Standard You set how "Melody" operates. Press m33 on the stand-by display. The folder list is displayed. Press m5. Item Description Volume...

Page 300: Deleting Melody
Deleting melody You can delete a melody at a time or all melodies in the folder at once. • Default melody cannot be deleted. Press m33 on the stand-by display, select a folder and press The melody list is displayed. Select a melody to be deleted and press m51.

Page 301: Sorting Melodies
Sorting melodies <Sort> Default Sort Criteria: Saved date & time Order: Descending Sorting of the melody list can be changed. Press m33 on the stand-by display, select a folder and press The melody list is displayed. Press m7. Item Description Sort Criteria Select the sequence to sort from "Title (Displayname)", "Save date &...

Page 303: Data Transfer For Foma Terminal
Data transfer for FOMA terminal Using Infrared Communication ..........302 miniSD memory card ..............309...

Page 304: Using Infrared Communication
Infrared communication You can send and receive data to/from other FOMA terminals, mobile phones or PCs with an infrared communication function. You can expand the range of possible uses by using infrared communication with i αppli to link to devices having an infrared communication function.

Page 305: Receiving Data By Infrared Communication
Receiving data by infrared communication You receive phonebook data, sent/received mail, Bookmarks and other data from mobile phones or PCs with an infrared communication function. The following table shows receivable data and where the received data are stored: Data Storage Order of storing data Phonebook Phonebook...

Page 306 Receiving all data items Note that when all data items such as phonebook data, sent/received mail, Bookmarks are received, all currently saved data will be overwritten by the received data. • To receive all, the authentication password is required. Decide in advance on any four-digit password that is the same for the sender and recipient, which must be entered by both parties.

Page 307: Sending Data By Infrared Communication
Sending data by infrared communication You can send phonebook data or the own number to mobile phones or PCs. You can send data by retrieving each item to send one at a time or by sending all items of the specified data type at once.

Page 308 Sending all data items • To send all data items, the authentication password is required. Decide in advance on any four-digit password that is the same for the sender and recipient, which must be entered by both parties. Press mp72 on the stand-by display. Press 1 to 7.

Page 309: Infrared Communication With I Αppli Software
Infrared communication with i αppli software <i αppli infrared communication> You can send or receive data by executing infrared communications from some i αppli software. i αppli software can also be executed by receiving i αppli starting data. • i αppli → P68 •...

Page 310: Operation
Operation Perform remote control operation with the infrared data port of FOMA terminal pointed at the infrared receiver of the supported device used. For operation procedure, follow the instructions on the display. INFORMATION • Using infrared communication from i αppli → P93 •...

Page 311: Before Using Minisd Memory Card
Before using miniSD memory card You can save still image and video data recorded by FOMA terminal in miniSD memory card. In addition, videos created with external devices (PC, etc.) can be saved in miniSD memory card for playing with the FOMA terminal ( → P271). •...

Page 312: Inserting Minisd Memory Card
Inserting miniSD memory card You use the miniSD memory card by inserting it in the miniSD memory card slot of FOMA terminal. • Turn the power OFF before inserting/removing the miniSD memory card. • Do not touch metal contacts with your finger when you insert or remove the miniSD memory card. •...

Page 313: Using Minisd Memory Card
Using miniSD memory card Data including images, video/i-motion and melodies from FOMA terminal are saved into a miniSD memory card. • The miniSD memory card cannot be used when All lock or PIM lock is ON. • Animation, continuous shots and files prohibited from outputting from FOMA terminal cannot be saved. miniSD memory card folder structure ■...

Page 314 *1: DCF is an abbreviation of Design rule for Camera File System and it is a standard for file systems. *2: Files with extension 3GP or MP4 are treated as MP4 format. *3: When the STILL folder becomes full, an SUDxxx folder is automatically created. *4: When the RINGER folder becomes full, an RUDxxx folder is automatically created.

Page 315 Creating i-mode Mail with data in miniSD memory card attached Data saved in miniSD memory cards can be attached to create i-mode Mail. • Files attachable to i-mode Mail → P137 Press mp76 on the stand-by display and press 1 to 4. A list of data is displayed.

Page 316 Moving/copying data from miniSD memory cards to FOMA terminal Data saved in the miniSD memory card is moved or copied to FOMA terminal. • If data in a miniSD memory card are changed/deleted with a PC, etc., the data are no longer correctly displayed on FOMA terminal.

Page 317 Deleting data in miniSD memory cards Data saved to miniSD memory cards is deleted. Press mp76 on the stand-by display and press 1 to 4. A list of data is displayed. Select the data to delete and press m3. A confirmation screen is displayed asking whether to delete. •...

Page 318 Searching data in miniSD memory cards <Search> Search the data saved on the specific date and time. Press mp76 on the stand-by display and press 1 to 4. A list of data is displayed. Press m7 and enter date and time. •...

Page 319 Formatting miniSD memory cards <Format> Format miniSD memory cards that already have saved data or new miniSD memory cards to make them ready to use in FOMA terminal. • miniSD memory card can be formatted in the following methods: Format method Description Quick format Only the data management area in miniSD memory card is formatted.

Page 320 Updating miniSD memory card information <Sync Data Info> If data in a miniSD memory card are changed, added or deleted the data to a miniSD memory card with a PC, etc., update the information that the data are no longer correctly displayed on FOMA terminal.

Page 321 Data Communication Before using Data Communication ........... 320 Communication Configuration File ........... 326 Using FOMA PC Configuration Software ......... 338 Setting Procedure of Not Using FOMA PC Configuration Software ... 358...

Page 322: 64K Data Communication
Data communication supported by FOMA terminal This section describes the data communication and connection modes available from FOMA terminal and usage precautions. Supported communication modes FOMA terminal supports three communication modes: packet communication, 64K data communication and data transfer. • FOMA terminal does not support fax communication. •...

Page 323: Usage Precautions
• Before using this function, the device registration and wireless connection via Bluetooth are needed. → P335 • At Dialup connection (APN) setup, connect using one of the following modem; - FOMA F900iT Bluetooth Modem - Standard Modem over Bluetooth link...

Page 324 User authentication during network access Some dialup connections require user authentication (ID and password) before a connection can be established. If user authentication is required, you must use your communication software (dialup network) to enter your ID and password before connection.

Page 325 ■ Glossary of Data communication • APN (Access Point Name) String to identify an ISP or corporate LAN to connect with by packet communication. The APN for mopera, for example, is "mopera.ne.jp". • Bluetooth OFF → P375 • Bluetooth ON → P375 •...

Page 326: Flow Of Setup For Data Communication
Bluetooth device manufacturer, installing communication configuration file is not necessary. *2: "mopera" is an internet connection service of NTT DoCoMo without subscription. If you would like to make a connection with Internet easily, it is recommended to use "mopera".

Page 327: Communication Configuration File
Communication configuration file Install the communication configuration file (found on the CD-ROM) on a PC before connecting FOMA terminal to PC to perform packet communication. → P328 FOMA PC configuration software When the FOMA PC configuration software (found on the CD-ROM) is installed on the PC, a number of settings required for data communication via connection between FOMA terminal and PC can be set in an easy operation.

Page 328: Connecting Pc To Foma Terminal
Connecting PC to FOMA terminal Connect a PC and FOMA terminal with the power ON. • Be sure to install drivers before connecting with a PC for the first time. → P328 Using FOMA USB connection cable Insert one end of the FOMA USB connection cable into the FOMA terminal's external connection terminal.

Page 329 Using desktop holder You can connect your PC to the FOMA terminal using an attached desktop holder during a charge. • Use a USB cable that conforms to USB specification 1.1 or 2.0 and that contains series A or series B connector. •...

Page 330: Installing Communication Configuration File (Drivers)
Steps 1 to 4 again. • If installation fails and "FOMA F900iT USB" is not displayed on the screen of Step 2 on P333, click " スタート (Start)" menu → " ファイル名を指定して実行 (Run)". Specify "<CD-ROM drive name>¥USBDRIVE¥...

Page 331 <Example> For Windows XP • If you use an operating system other than Windows XP, the display of the screens may differ. Insert the CD-ROM for FOMA F900iT. Click " スタート (Start)". Then click " コントロールパネル (Control Panel)" → " プリンタとその他のハードウェア...

Page 332 Specify "CD-ROM-drive-name:¥BT_modem" as " 製造元のファイルのコピー元 (Copy source of manufacturer's file)" and click "OK". Select "FOMA F900iT Bluetooth Modem" and click " 次へ (Next)". Select " 選択したポート (Selected port)" and select the desired COM port number from the list. Click " 次へ (Next)".

Page 333: Checking Installed Communication Configuration File (Drivers)
Checking installed communication configuration file (drivers) The method of checking the installed driver on the PC is explained here. • When the PC does not detect the FOMA terminal correctly, settings and communication cannot be performed. <Example> To check the driver in Windows XP Click "...

Page 334 • When you connect a FOMA terminal using Standard Modem over Bluetooth link or the Bluetooth modem provided by the Bluetooth device manufacturer, installing communication configuration file is not necessary. For details of the Bluetooth devices except for FOMA F900iT Bluetooth Modem, contact the Bluetooth device manufacturers.

Page 335: Uninstalling Communication Configuration File
INFORMATION • If installation fails or when "FOMA F900iT USB" is not displayed on the screen of Step 2, click " スタート (Start)" menu → " ファイル名を指定して実行 (Run...)", specify "<CD-ROM drive name>: ¥USBDRIVE¥F900iTin.exe" and click "OK" to execute directly.

Page 336 Uninstalling when wireless connection is made using Bluetooth <Example> Uninstalling the driver in Windows XP • Disconnect the wireless connection between your FOMA terminal and the PC beforehand. → P337 Click " スタート (Start)". Then click " コントロールパネル (Control Panel)" → " プリンタとその他のハードウェア (Printer/Other Hardware)"...

Page 337: Preparing Bluetooth Communication
Preparing Bluetooth communication <Dialup Networking Service> You can communicate data from a Bluetooth-compatible PC through the FOMA terminal. After accepting all connection or connecting automatically from the FOMA terminal, perform connecting operation from a PC. • For entire Bluetooth such as detailed settings in Bluetooth, see the "Bluetooth" section. → P375 •...

Page 338 If a connection request is displayed, select "Yes" and then press When the Bluetooth passkey input screen is displayed, input a Bluetooth passkey and press • One to sixteen single-byte alphanumeric characters can be entered for the Bluetooth passkey. • Use the same Bluetooth passkey to be set as for the FOMA terminal and PC. If a registration confirmation is displayed, select "Yes"...

Page 339 Quitting dialup networking service A dialup networking service is stopped. Press mp771 on the stand-by display during the dialup networking service. A Dialup Network menu will be displayed. Press 3. Select "Yes" and then press The dialup networking services are stopped. If other Bluetooth services are not started, the power of Bluetooth is switched off and indicated on the upper...

Page 340: Foma Pc Configuration Software
FOMA PC configuration software A number of settings are required when FOMA terminal is connected to a PC with USB cable or Bluetooth to perform packet communication or 64K data communication. The FOMA PC configuration software allows you to easily perform the following settings: •...

Page 341: Installing Foma Pc Configuration Software
<Example> Installing the software under Windows XP • The screen differs when using the operating system other than Windows XP. Insert the CD-ROM for FOMA F900iT into the PC's CD-ROM drive. Click " スタート (Start)" menu → " ファイル名を指定して実行...

Page 342 Check that " タスクトレイに常駐する (Reside in task tray)" is selected and click" 次へ (Next)". The "W-TCP 設定 (W-TCP setup)" resides in the task tray after the setup. → P354 Residing in task tray is the recommended setting for optimum control of "W-TCP communication"...

Page 343 Precautions required during installation of FOMA PC configuration software When old "W-TCP configuration software" is installed The screen shown on the right is displayed when old "W-TCP configuration software" is installed. Delete old "W-TCP configuration software" using " アプリケーション（プログラム）の追加と削除 (Add/delete applications (programs))". → P352 When old "FOMA data communication configuration software"...

Page 344: Making Communication Settings (Easy Setup)
Making communication settings (Easy setup) Easy setup of FOMA PC configuration software allows simple dialup setting for FOMA by making selections and entries according to the instructions displayed. • Check that FOMA terminal is connected to the PC correctly before performing the following settings. →...

Page 345 • The following characters (one-byte characters) cannot be entered: ¥/: ?!<> " • In case of Bluetooth connection, " モデム名 (Modem name)" is Example at USB connection specified as "FOMA F900iT Bluetooth Modem" or the Bluetooth modem provided by the PC manufacturer.

Page 346 • In case of Bluetooth connection, " モデム名 (Modem name)" is specified as Example at USB connection "FOMA F900iT Bluetooth Modem" or the Bluetooth modem provided by the PC manufacturer. Click "OK". The PC must be restarted for the changes to take effect. Click " はい (Yes)" when a window prompts you to restart the PC.

Page 347 • In case of Bluetooth connection, " モデム名 (Modem name)" is specified as "FOMA F900iT Bluetooth Modem" or the Bluetooth modem provided by the PC manufacturer. ■ Advanced settings (TCP/IP settings) Click "...

Page 348 Click " 戻る (Return)" to change a setting. • In case of Bluetooth connection, " モデ Example at USB connection ム名 (Modem name)" is specified as "FOMA F900iT Bluetooth Modem" or the Bluetooth modem provided by the PC manufacturer. Click "OK".

Page 349 ¥/: ?!<> " • Select modem as follows; - For USB connection : FOMA F900iT Example at USB connection - For Bluetooth connection : FOMA F900iT Bluetooth Modem, Bluetooth リンク経由標準モデム (Standard Modem over Bluetooth link) or the Bluetooth modem provided by the PC manufacturer.

Page 350 ISDN synchronized 64Kbps access point. • Connection name : Optional • Modem selection : Select modem as follows; - For USB connection : FOMA F900iT Example at USB connection - For Bluetooth connection : FOMA F900iT Bluetooth Modem, Bluetooth リンク経由標準モデム...

Page 351 Click " 戻る (Return)" to change a setting. Example at USB connection • In case of Bluetooth connection " モデム名 (Modem name)" is specified as "FOMA F900iT Bluetooth Modem", "Bluetooth リンク経由標準モデム (Standard Modem over Bluetooth link)" or the Bluetooth modem provided by the PC manufacturer..

Page 352: Executing Communication Set With Foma Pc Configuration Software
Executing communication set with FOMA PC configuration software Starting communication set with the FOMA PC configuration software and disconnection are explained here. Operations for communications that come in while 64K data communication or voice call is taking place are also explained. •...

Page 353 To disconnect Just exiting the Internet browser may not disconnect the connection. To ensure disconnection, perform the following operation: Double-click in the task tray. The connection screen is displayed. Click " 切断 (Disconnect)". The connection is disconnected. ■ For Bluetooth connection The dialup networking service of the FOMA terminal also stops.

Page 354: Uninstalling Foma Pc Configuration Software
Uninstalling FOMA PC configuration software Procedure for uninstalling the FOMA PC Configuration Software is explained here. • The actual screens displayed depend on the operating system you use. Uninstall preparations Communication settings adapted for FOMA use must be reset before uninstalling the FOMA PC configuration software.

Page 355 Select "FOMA PC 設定ソフト (FOMA PC configuration software)" and click " 変更と削除 (Update/delete)". Select NTT DoCoMo "FOMA PC configuration software" Click here Check that you have selected the correct program for removal and click " はい (Yes)". The uninstall process of the FOMA PC configuration software starts.

Page 356: Optimizing Packet Communication Setting With W-Tcp Setting
Optimizing packet communication setting with W-TCP setting The method of optimizing the PC packet communication setting for FOMA network by means of "W-TCP configuration software" and canceling optimization is explained here. Role of W-TCP The "W-TCP configuration software" is a "TCP parameter tuning tool" for optimizing TCP/IP transmission capacity during packet communication in the FOMA network.

Page 357 ■ When the system has been optimized The screen shown on the right is displayed. Make the required settings if changes are to be made. You need restart your PC to have your changes take effect. ■ Canceling optimization Click " システム設定 (System settings)" in "W-TCP 設定（ダイヤルアップ）...

Page 358: Setting Dialup Connection (Apn)
Setting dialup connection (APN) Set dialup connection (APNs) for packet communication. Up to ten access points (APNs) can be set, which are to be registered under registration numbers (cid) 1 to 10 for management. • Check that FOMA terminal is connected to the PC correctly before performing the following settings. →...

Page 359 Saving to file To back up dialup connection (APN) settings registered in FOMA terminal or save dialup connection (APN) settings during editing, from the toolbar, click " ファイル (File)" menu → " 名前を付けて保存 (Save as...)" or " 上書き保存 (Save)". Importing settings from file To edit the access point (APN) saved on the PC or write to the FOMA terminal, from the toolbar, click "...

Page 360: Setting Dialup Network
Setting Dialup Network The method of setting dialup connection for packet communication/64K data communication without the FOMA PC configuration software is explained here. • Packet communication, 64K data communication → P320 • Conditions of packet communication and 64K data communication → P322 Setting for packet communication Setting for 64K data communication Installing network transmission setup file P328...

Page 361 Setting for packet communication Communication software to input AT commands is required for making settings. The method of setting using "HyperTerminal" that comes with Windows is explained here. Setting dialup connection(APN) Default cid1: mopera.ne.jp cid2–cid10: Not set Set dialup connection(APN) for packet communication. Up to ten dialup connections (APN) can be set, which are to be registered under registration numbers cid1–cid10 ( →...

Page 362 • Select connection procedure as follows. - For USB connection : FOMA F900iT - For Bluetooth connection : FOMA F900iT Bluetooth Modem, Bluetooth リンク経由標準モデム (Standard Modem over Bluetooth link) or the Bluetooth modem provided by the PC manufacturer When the connection screen is displayed, and click " キャン...

Page 363 The dialup connection(APN) and registration number (cid) The dialup connections(APN) for packet communication can be set for registration numbers cid1 – cid10 in FOMA terminal. By default, "mopera.ne.jp", which is the APN for connection to DoCoMo's Internet connection service "mopera", is set for cid1. For connecting to ISPs other than mopera or corporate LANs, register APN for cid2 –...

Page 364: Setting Dialup Connection
■ Turning Send caller ID function ON/OFF by dialup network settings The dialup network settings can also be used to append "186" (ON) or "184" (OFF) to the dialup connection number. If "186" (ON)/"184" (OFF) is set by both the ＊DGPIR command and dialup network settings, the result is as shown below.

Page 365 Select " モデム (Modem) "and click " 次へ (Next)". The connection name screen is displayed. • Select modem as follows ; - For USB connection : FOMA F900iT (COMX) Example at USB connection - For Bluetooth connection : FOMA F900iT Bluetooth Modem (COMX), Bluetooth リンク経由標準モデム...

Page 366 " 全般 (General)" tab. • When more than one modem is connected to the PC and select " 接続方法 (Connection method)". - For USB connection : FOMA F900iT (COMX) - For Bluetooth connection : FOMA F900iT Bluetooth Modem (COMX), Bluetooth リンク経由標準モデム (COMX)

Page 367 Click " ネットワーク (Network)" tab and check the setting of each item. • Set " 呼び出すダイヤルアップサーバーの種類 (Type of dialup server to call)" to "PPP:Windows95/98/ NT4/2000,Internet". • Select only " インターネットプロトコル (TCP/IP) (Internet protocol (TCP/IP))" in " この接続は次の項目を使用します (Use these items for this connection)" "QoS パケットスケジューラ...

Page 368 Example at USB connection information screen is displayed. • If the modem to be used is not set, select one of the followings. - For USB connection : FOMA F900iT - For Bluetooth connection : FOMA F900iT Bluetooth Modem, Bluetooth リンク経由標準モデム (COMX)

Page 369 Set each item in " 接続 (Connection)" tab as shown. Click " アドレス (Address)" tab and set each item as shown. Click "OK". Internet account connection information screen reappears. Click " 次へ (Next)". Internet account login information screen is displayed. "...

Page 370 " 全般 (General)" tab. • If multiple modems are installed in the PC, select a modem in " 接続方法 (Connection method)" item. - For USB connection : FOMA F900iT (COMX) - For Bluetooth connection : FOMA F900iT Bluetooth Modem (COMX), Bluetooth リンク経由標準モデム (COMX)

Page 371 • Check " モデムの選択 (Modem selection)" and set the proper modem. Example at USB connection - For USB connection : FOMA F900iT - For Bluetooth connection : FOMA F900iT Bluetooth Modem, Bluetooth リンク経由標準モデム (Standard Modem over Bluetooth link) or the Bluetooth modem provided by the PC...

Page 372 • Uncheck " 市外局番とダイヤルのプロパティを使う (Use area code and dial properties)" ( • Check " 接続の方法 (Connection procedure)" and set the proper modem. - For USB connection : FOMA F900iT - For Bluetooth connection : FOMA F900iT Bluetooth Modem, Bluetooth リンク経由標準モデム (Standard Modem...

Page 373 • Check " モデムの選択 (Modem selection)" and set the proper modem. Example at USB connection - For USB connection : FOMA F900iT - For Bluetooth connection : FOMA F900iT Bluetooth Modem, Bluetooth リンク経由標準モデム (Standard Modem over Bluetooth link) or the Bluetooth modem provided by the PC...

Page 374 ティを使う (Use area code and dial properties)". • Check " 接続の方法 (Connection procedure)" and select the proper modem. - For USB connection : FOMA F900iT - For Bluetooth connection : FOMA F900iT Bluetooth Modem, Bluetooth Example at USB connection リンク経由標準モデム (Standard Modem...

Page 375: Connecting Via Dialup Network
Connecting via Dialup Network The method of dialup connection for packet communication/64K data communication without the FOMA PC configuration Software is explained. • Check that FOMA terminal is connected to the PC correctly before performing the following settings. → P326, P327 The Bluetooth connection requires you to operate Accept all or Accept registered on the FOMA terminal.

Page 376 To disconnect Just exiting the Internet browser may not disconnect the connection. To ensure disconnection, perform the following operation: Double-click in the task tray. The connection screen is displayed. Click " 切断 (Disconnect)". The connection is disconnected. ■ For Bluetooth connection The dialup networking service of the FOMA terminal also stops.

Page 377: Before Starting Bluetooth
Bluetooth Before starting Bluetooth ............376 Using Bluetooth devices ............378 Setting environment ..............384 ■ Glossary of Bluetooth • Bluetooth OFF To disconnect the connection with a Bluetooth device and stop the Bluetooth feature of the FOMA terminal. ( → P10) at the top of display is disappeared. When you switch OFF Bluetooth, •...

Page 378: About Bluetooth
About Bluetooth Bluetooth is a technology that connects Bluetooth-compatible devices such as mobile phone and PC without wires. With Bluetooth mounted in the FOMA terminal, you will be able to connect your terminal to Bluetooth-compatible devices such as PCs, car navigation systems, headsets, and the like for calls or communication without using any cables in a variety of situations.

Page 379: What You Can Do With Bluetooth
What you can do with Bluetooth By preparing a Bluetooth-compatible device, you can perform wireless calls, handsfree calls, wireless packet communication, and wireless 64K data communication. Supported Bluetooth version Bluetooth Specification Ver. 1.1 compliant Supported Bluetooth profiles • Dial-up Networking profile •...

Page 380: Using Headset And Handsfree Devices
INFORMATION • F900iT terminals do not guarantee wireless connection to all Bluetooth devices. - The Bluetooth devices you want to connect your FOMA terminal to must be compliant with the Bluetooth Specification defined by Bluetooth SIG, and must be authorized by Bluetooth SIG. - Although the connection-target device is compliant with the Bluetooth Specification, some phenomena may occur (the connection is failed, the operation method/display/action differ, or data exchange is impossible, etc.), depending on the characteristics or specifications of the device which connect to.

Page 381 Registering devices <Register devices> Registers devices to the FOMA terminal and connect wirelessly to the device. • With automatic/manual connection, you can connect the FOMA terminal wirelessly to only a registered device. → P380 • Once you have registered a device, you do not need to register it again unless you unregister it or a new entry replaces it.

Page 382 Automatic connection with devices <Accept registered> Connects the FOMA terminal to the devices already registered. • The device must be registered in advance. → P379 <Example> Connecting automatically to Bluetooth Headset F01 without wires Make the Bluetooth headset waiting connection status. •...

Page 383 Select the device and press • When connecting handsfree devices, check the device name in the manual for the device. Select "Yes" and press ( → P10) About ten seconds later, Bluetooth is switched ON and lighting appears at the top of the display. Then wireless device connection starts. When the connection is established, the stand-by display reappears and blinking displayed.

Page 384: Switching Off Bluetooth
Quitting service <Quit service> Quits the active service. <Example> Quitting the headset service During the headset service, press mp773 on the stand-by display. The Headset menu is displayed. • To stop the handsfree service, press mp772. Press 3. Select "Yes" and press The headset service stops.

Page 385: Activating Bluetooth Multi-Service
Activating Bluetooth multi-service You can concurrently activate some or all of the dial-up networking service, headset service, and handsfree service being set to "Valid" in Multi-service settings and make them waiting connection status. • Register devices in advance when you activate services. •...

Page 386: Setting Up Bluetooth Environment
Press p. The Multi-service settings are completed. Activating multi-service <Activate Multi-service> You can activate concurrently the services you set to valid in Multi-service setting and connect automatically. Press mp775 on the stand-by display. About ten seconds later, Bluetooth is switched ON and ( →...

Page 387 Managing registered devices <Registered Devices> You can display the Bluetooth devices registered to the FOMA terminal. Protect/Cancel protection, Rename devices, Prioritize/Reset priority, Allow connection/Reject connection, and Delete from the list can be set for each Bluetooth device. Protect Sets to protect a registered device from being overwritten with a new entry. •...

Page 388 Select the registered device and press Device information is displayed. Status of available services: Device name (Blue) : Dialup networking service available Device address (Blue) : Handsfree service available (Blue) : Headset service available Device type (Blue) : When there is a service other than the above (Gray) : Dialup networking service unavailable (Gray) : Handsfree service unavailable (Gray) : Headset service unavailable...

Page 389 Select the item to be set, press , and set the item. Press p. Detail settings ends. INFORMATION • The FOMA terminal enters the power saving mode when: - Dialup networking service: The non-communication status continues for a while during packet communication.

Page 390: Displaying Information About Connected Device
Press 6. Press 1 or 2. The priority of dial-up connection is set. Setting incoming alert light <Light setting> Default You can set the incoming alert light flashing to ON/OFF when Bluetooth power is ON. Press mp774 on the stand-by display. The Bluetooth settings menu is displayed.

Page 391: Appendix
Appendix Appendix ..................390...

Page 392: About Foma F Series Data Link Software
Pentium 166MHz or faster processor is recommended Memory requirements 32MB or more Hard disk capacity 20MB or more free disk space Display High Color (16-bit) or better recommended Driver FOMA F900iT USB driver ® ® ® ® Software environment* Microsoft Outlook...

Page 393 INFORMATION • Some data cannot be synchronized. For details about data that can be synchronized, read Help of the software. • The same data item may go under a name in the data link software that differs from that used in the FOMA terminal.

Page 394 Starting up data link Click " スタート (Start)" menu, then select " プログラム (Programs)" (" すべてのプログラム (All programs)" for Windows XP) → "FOMA F シリーズデータリンクソフト (FOMA F series data link software)", then click "FOMA F シリーズデータリンクソフト (FOMA F series data link software)". The data link is started up and the screen shown on the right is displayed.

Page 395: Data Interchange Between Foma Terminal And External Device
Data interchange between FOMA terminal and external device This section describes video data interchange between FOMA terminals and external devices. <Video (MP4 file)> <Video (ASF file)> Mail attachment, miniSD miniSD memory card F900iT PC, etc. PC, etc. memory card, etc. Playing video data created with external device on FOMA terminal You can play some videos (MP4 and ASF files) created with external devices such as a PC on FOMA terminals by storing on miniSD memory cards.

Page 396: Error Messages
Error Messages i-mode-related error messages The following table contains error messages related to operation of i-mode and the Short Message Service (SMS). • The "(number)" or "(XXX)" in error messages is a code used to distinguish the error sent from i-mode Center. Error Messages Explanation Address is not valid.

Page 397 Error Messages Explanation Inbox full. Unable to receive Unable to receive Short Messages (SMS) because there is new messages. insufficient storage space in the Inbox. Please read unread mail, release mail protection or delete unnecessary mail. → P150, 181, 182, 189, 192, 193 Input error (205) Input data for the site or Internet Web page is in error.

Page 398 Error Messages Explanation Quit recording Chara-den. This message is displayed when Chara-den player is active at the time of saving Chara-den that has been downloaded. To save, exit Chara-den player. → P99 Receiving messages stopped. Unable to receive all Short Messages (SMS) because an error Some messages unreceived.

Page 399 Error Messages Explanation Transmission failed to some Pressing displays the receiver that the transmission failed. addresses. (561) Check to see if the address of the receiver is correct and retry transmission at another location with good radio wave condition. Transmission failed. Failed to transmit the i-mode Mail or the Short Message (SMS).

Page 400: At Commands
AT commands AT commands are commands for setting FOMA terminal functions using a PC. When the commands are entered on a PC, FOMA terminal operates according to them. AT command input format "AT" must be entered before each AT command. Commands must be entered in one- byte alphanumeric characters.

Page 401: At Command List
• When AT commands are input, entering "¥" may cause "\" to appear depending on the font setting for the PC or communication software in use. [AT] : AT command that can be used via the FOMA F900iT Command Port.* [M] : AT command that can be used via the FOMA F900iT Modem Port.

Page 402 AT command Outline Parameters/Description Command examples (continued) n=0 :Add to list. (Add APN defined by <cid> AT＊DGAPL=<n> to list of APNs permitted for incoming [, <cid>] communications.) n=1 :Delete from list. (Delete APN defined by <cid> from list of APNs permitted for incoming communications.) AT＊DGARL=<n>...

Page 403 AT command Outline Parameters/Description Command examples AT+CGMR Displays FOMA terminal AT+CGMR version. -------- 1234567890123456 AT+CGREG=<n> Sets whether to report <n> AT+CGREG=1 network service 0: OFF (default) 1: ON registration status. The (Set to "ON".) status reported is "Within AT+CGREG? When "AT+CGREG=1" is set, the status service area"...

Page 404 AT+GMI manufacturer name in FUJITSU -------- one-byte alphanumeric characters. AT+GMM Displays FOMA AT+GMM terminal's abbreviated FOMA F900iT -------- product name (FOMA F900iT) in letters and numbers. AT+GMR Displays the FOMA Displays FOMA terminal version in AT+GMR terminal version. "VerX.XX" format.

Page 405 Disconnects line when (Busy) entered during packet -------- communication or 64K data communication. NO CARRIER Displays the confirmation n=0: NTT DoCoMo ATI0 ATI<n> code. n=1: Displays abbreviated product name NTT DoCoMo (FOMA F900iT) n=2: Displays product version in "VerX.XX" format...

Page 406 AT command Outline Parameters/Description Command examples ATX<n> Sets whether there is Busy tone detection : ATX1 speed display in the Sends BUSY response when dialup CONNECT display for the connection is busy. connection. It also Dial tone detection : detects busy or dial Detects whether FOMA terminal is tones.

Page 407 AT command Outline Parameters/Description Command examples ATS7=<n> Sets waiting time n=1 to 255 (default: n=60) ATS7=60 (seconds) until end of When sending 64K data communication or connection. *1 packet communication, if the set number of seconds after FOMA terminal receives ATD input from the PC has elapsed but the FOMA terminal cannot send "CONNECT"...

Page 408: Error Messages - Display
Disconnection reason display ■ Packet communication Value Reason APN is not present or is incorrect. Disconnected by network. Terminal does not subscribe to packet communication. Disconnected normally. ■ 64K data communication Value Reason Specified number does not exist. Disconnected normally. Communication is impossible because remote device is busy.

Page 409 Supplement to AT command ■ Command name: +CGDCONT=[parameter] • Outline Sets the destination (APN) for packet communication. • Format +CGDCONT= [<cid> [, "PPP" [, "<APN>"]]] • Parameter description <cid> ＊ : 1 – 10 <APN> ＊ : Optional "<cid> ＊ " is the number used to control the destination (APN) for the packet communication to be registered in FOMA terminal.

Page 410 ■ Command name: +CGEQMIN=[parameter] • Outline Registers the criteria for judging whether to approve QoS (Quality of Service) provisioned by the network when PPP packet communication is established. • Format AT+CGEQMIN=[<cid> [,, <Maximum bitrate UL> [, <Maximum bitrate DL>]]] • Parameter description <cid>...

Page 411 ■ Command name: +CGEQREQ=[parameter] • Outline Sets QoS (Quality of Service) requested to the network when transmission is performed during PPP packet communication. • Format AT+CGEQREQ = [<cid>] • Parameter description Only commands that require connection at 64 kbps upload / 384 kbps download can be set.

Page 412: Result Codes
Result codes ■ Result codes Text display Meaning Operation performed normally CONNECT Terminal connected to other party RING Incoming call NO CARRIER Line disconnected ERROR Unable to accept command NO DIAL TONE Unable to detect dial tone BUSY Detecting the busy tone NO ANSWER Completed connection and time out 100*...

Page 413 ■ Communication protocol result code Text display Meaning PPPoverUD Connect via PPPoverUD (BC = UDI, +CBST = 116, 1, 0) AV32K AV (video-phone) connect via [32K] AV64K AV (video-phone) connect via [64K] PACKET Connected with PACKET ■ Display example of result code display When ATX0 is set Regardless of the settings of AT¥V command ( →...

Page 414: Index
INDEX +CNUM ....... 402 Multi-service settings ..383 +CR ........402 Preparing Bluetooth Add address ......129 +CRC ........402 communication ....335 Album +CREG ........ 402 Registered devices .... 385 Image ........264 +GMI ........402 Time-out to search ... 387 i-motion ......

Page 415 Mail text ......199 Short Message (SMS) ..185 Chara-den ....... 94 miniSD memory card Frames Creating folder ....104 ........313, 314 Deleting ......105 Camera ....... 237 Short Message (SMS) ..187 Deleting folder ....105 List ........261 URL ........

Page 416 Starting software ....68 Registering secret code ..166 Internet connection Upgrade software ....89 Reply ........152 Enter URL ......36 Using camera ...... 93 Setting ........ 164 URL history ......36 Using infrared Sort mail ......203 Internet service provider usage communication ....

Page 417 Sort ........299 Online data mode ....398 Remote control ..... 307 Title (Displayname) ..292 Outbox ......143, 178 Replying to Viewing detail Information By display type ....196 i-mode Mail ......152 ..........292 Checking No. of items ..195 Short Messages (SMS) ..

Page 418 setting ........ 209 Moving/Copying into UIM Editing ........ 278 Storage period ....126 (FOMA card) ...... 187 Editing from video/i-motion Moving/copying to FOMA with by method function ... 278 Signature terminal ......188 Editing from video/i-motion Icons list ......261 Number of saved/registered with by size function ..

Page 419 About Proper Telephone Etiquette Do not disturb people around you when using your FOMA terminal. Always turn OFF your FOMA terminal in the following situation. ■In a location where use of mobile terminals is prohibited There are places where you cannot use a mobile terminal. Always turn OFF your FOMA terminal when: - In an airplane or hospital * Be aware that patients use electronic medical equipment in many areas in hospitals.

Page 420 ･･･ or your manners! When using your mobile phone in a public place, don't forget to show common courtesy and consideration for others around you. Retailer NTT DoCoMo Group NTT DoCoMo Hokkaido, Inc. NTT DoCoMo Tohoku, Inc. NTT DoCoMo Tokai, Inc.

NTT docomo Foma F900iT Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NTT docomo Foma F900iT

Summary of Contents for NTT docomo Foma F900iT