Maintenance - Tektronix 310 Instruction Manual

MAINTENANCE
Replacement of components
Tektronix will supply replacement components
components are standard electronic and radio
parts we suggest you get them from your local
dealer if you can. Be sure to consult your instruc-
tion manual first to see what tolerances are re-
We specially select some of the components,
whose values must fall within prescribed limits, by
sorting through our regular stocks. The compon-
ents so selected will have standard RETMA color-
code marks showing the values and tolerances of
the stock they were selected from, but they will
manufacture at Tektronix, are identified in the
parts lists either by notes or by our own stock
factory in Portland, Oregon.
Parts-ordering information
You will find a serial number on the frontis-
and sometimes text. These changes are in gener-
al, only appropriate to the instrument whose serial
ment that have been made after the printing of
the manual.
ing the factory test procedure, Our technicians
hand-tailor the circuits, if it seems appropriate, to
provide the widest possible latitude of operation.
cuit improvements as they are developed in our
engineering department, or when improved com-
changes are to your benefit. We have tried to
Soldering precaution
The solder used on the ceramic terminals in this
Wg
tools.
All signal feads have a single stripe. A few
letters on the diagrams.