Toshiba Satellite P10-304 User Manual page 44

LAN Jack
Ether
Do not cover the cooling vent or otherwise obstruct it. Doing so may
cause the computer to overheat and result in damage.
Parallel Port
If ECP is enabled, you need to enable ECP in the BIOS setup menu.
External Monitor Port This 15-pin port lets you connect an external
TV/Video Out
DC IN 19 V Jack
DC IN 19V
Satellite P10 Series
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T) and Fast
Ethernet LAN (100 megabits per second,
100BASE-Tx).
This Centronics-compatible 25-pin parallel port
is used to connect a parallel printer or other
parallel device. This port supports Extended
Capabilities Port (ECP) standard.
video display to the computer.
Plug a 4-pin S- video cable into this connector
for output of NTSC or PAL signal.
The DC-IN socket is where you plug in the AC
adapter.
The Grand Tour
2-6