Utilities - Toshiba Satellite P10-304 User Manual

Low Battery
Automatic
Hibernation
Hibernation
Standby
Before entering Standby mode, be sure to save your data.
Do not install or remove a memory module while the computer is in
Standby mode. The computer or the module could be damaged.
Do not remove the battery pack while the computer is in Standby mode.
Data in memory will be lost.

Utilities

This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility's online manual, help files or
readme files.
TOSHIBA Power
Management Utility
TOSHIBA Console
Satellite P10 Series
When battery power is exhausted to the point
that computer operation cannot be continued,
the system automatically enters Hibernation and
shuts down. You can specify the setting in the
TOSHIBA Power Management Utility.
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk, when you
turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power section in Chapter 3,
Getting Started, for details.
In Standby mode, power to the system remains
on, but the CPU and all other devices are in
sleep mode. When the computer is in standby
mode, the Power LED flashes in amber. The
computer enters Standby mode regardless of
the Hibernate setting. Refer to the Turning off the
power section in Chapter 3, Getting Started, for
details.
There are two ways to display the Windows XP
Control Panel. The default is Category View.
TOSHIBA Power Management Utility is under the
Performance and Maintenance item.
TOSHIBA Console is a graphical user interface
that provides easy access to help and services.
It is the default function launched by the
TOSHIBA Console button.
Introduction
1-9