Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Star FL3X System-M
Summary of Contents for Star FL3X System-M
- Page 1 FL3X System-M Instructions for Use...
-
Page 2: Contact Information
Therefore, the product is only allowed to be used in the sense of the product use case described herein. STAR ELECTRONICS GmbH & Co. KG makes no warranty express or implied, as to this document or the information content, materials or products for any particular purpose, nor does STAR ELECTRONICS GmbH & Co. - Page 3 FL3X SFP 1000BASE-T1 2014/30/EU EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-6-2 EN 61000-6-3 EN 55011 EN 61326-1 Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 3 of 36...
-
Page 4: Revision History
Updated chapter “Create a bootable USB Flash Drive” D1V3-F 07.04.2025 Updated accessory parts Related Hardware / Software Versions Product Reference No. Version Remarks FL3X System-M 3-01050A01 Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 4 of 36... -
Page 5: Table Of Contents
Used Pictograms ..........................8 Safety and Handling Instructions ......................9 Meaning of Text Styles ........................10 Product Description ..........................11 FL3X System-M at a glance ........................ 11 Accessory Parts ..........................11 Technical Data ............................13 Electrical Characteristics ........................13 Physical Characteristics ........................13 Environmental Conditions ........................ - Page 6 Appendix B: ............................33 8.2.1 Acronyms and Abbreviations ......................33 8.2.2 List of Tables ............................. 34 8.2.3 List of Figures ............................ 35 Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 6 of 36...
-
Page 7: General
STAR ELECTRONICS GmbH & Co. KG. WARNING The FL3X System-M may be used to communicate with networked electronic systems. E.g. FlexRay, CAN or Ethernet. Any use of the product outside a fully controlled testing and/or laboratory environment... -
Page 8: Used Pictograms
WARNING The FL3X System-M is NOT designed, intended, or authorized any may NOT be used for or in connection with the following purposes and/or devices: - use as part of medical systems... -
Page 9: Safety And Handling Instructions
FL3X System-M has to be handled as described herein. Changes or modifications of the FL3X System-M are not allowed for safety and warranty reasons! STAR ELECTRONICS GmbH & Co. KG is not liable for any damages arising from non-observance of the product information. -
Page 10: Meaning Of Text Styles
NOTICE To prevent irreversible damages to the FL3X System-M: • Avoid any direct current flow through the housing of the device or the shield of the Binder connectors! • Do not connect any other signals to the interfaces as described in chapter 8.2 Accessory Parts. -
Page 11: Product Description
Product Description FL3X System-M at a glance The FL3X System-M is the mid-range variant of the FL3X System family and is characterized by high performance optimized for the multi-gigabit range and high flexibility with regard to the equipment with bus systems. - Page 12 WiFi antenna • Ethernet cable For further information about accessories for the FL3X System-M see chapter 7.2 Accessory Parts. For possible configurations of the FL3X System-M please contact sales-ee@star-cooperation.com. NOTICE Use only accessory parts from STAR ELECTRONICS GmbH & Co. KG listed in chapter 7.2 Accessory Parts to ensure proper function and for warranty reasons!
-
Page 13: Technical Data
5140 g (without accessory) Dimensions approx. L x W x H 227 x 261 x 128 mm (without WiFi antennas) Table 2: Physical Characteristics Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 13 of 36... -
Page 14: Environmental Conditions
The following illustrations are used for technical descriptions only. Not all connectors are functional or currently in use. 3.4.1 Front Slots Figure 1: FL3X System-M - Front slots (STAR Slot6 & Slot7) Created by STAR ELECTRONICS GmbH & Co. KG... - Page 15 Figure 2: STAR Slot6 mounted with 10G-CMI-Module The 10G-CMI-Module only works on CMI Slot2/STAR Slot 6. Figure 3: STAR Slot6 and Slot7 mounted with CMI-DIO-Module Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 15 of 36...
-
Page 16: Rear Slots
3.4.2 Rear Slots Figure 4: FL3X System-M - Rear slots (STAR Slot3, 4, 5) Figure 5: FL3X System-M - Rear slots - STAR Slot1 & 2 mounted with FL3X Interface-PMC Created by STAR ELECTRONICS GmbH & Co. KG Date created... - Page 17 Figure 6: FL3X System-M - Rear slots – STAR Slot 1 & 2 mounted with FL3X Interface-PCIe Figure 7: FL3X System-M - Rear slots – STAR Slot 1 & 2 mounted with Quad SFP Card If your configuration has more than one FL3X Interface-PCIe or FL3X Interface-PMC, mount the M9- Connectors on the inside first.
-
Page 18: Interfaces
Figure 8: FL3X System-M – available Slots for the ‘Mini PCIe SFP Single’ module Interfaces The following illustrations are used for technical descriptions only. Not all connectors are functional or currently in use. 3.5.1 Front Figure 9: FL3X System-M - Front interfaces Created by STAR ELECTRONICS GmbH &... -
Page 19: Rear
3.5.2 Rear Figure 10: FL3X System-M - Rear interfaces Connectors The position of each connector is shown in Figure 9: FL3X System-M - Front interfaces and Figure 10: FL3X System-M - Rear interfaces. 3.6.1 DC_IN 9-48V DC_IN: 3 Pins DC 9-48V power input... -
Page 20: Usb 3.0 (Type A)
USB 2.0 Data + Ground StdA_SSRX- SuperSpeed receiver StdA_SSRX+ SuperSpeed receiver GND_DRAIN Ground StdA_SSTX- Superspeed Transmitter StdA_SSTX+ Superspeed Transmitter Table 5: USB3.0 Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 20 of 36... -
Page 21: Usb 2.0 (Type A)
The TEMP LED is only available when the IGN-Module is installed. 3.6.6 Ethernet-RJ45 Ethernet-RJ45 Signal Name Description Transmit + Transmit - Receive + Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 21 of 36... -
Page 22: Pwr_Sw1: Power Button With Power On Led
LED Type LED Status Status Blue Power off Power LED Green Power on Blinking Blue & Green Standby Table 11: Power Button Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 22 of 36... -
Page 23: Getting Started
Ensure to grasp the plug and not the cable when disconnecting the FL3X System-M. Licensing To update the FL3X System-M with a new FL3X Config runtime license file, refer to the document Firmware Update. If you have any questions about the licensing, refer to the document FL3X Config FAQ for Software and Runtime Licenses. -
Page 24: Shipping, Maintenance And Disposal
Shipping, Maintenance and Disposal Keep the package in which the FL3X System-M was shipped. Store and transport the FL3X System-M in a cool, dry, dark environment. Don’t store or transport it near sources of magnetic fields. Dispose off properly per regulations of the country where end-of-life occurs. -
Page 25: Troubleshooting
Troubleshooting Software Repair and Update If the FL3X System-M has any issues and can’t be accessed via Ethernet anymore, the FL3X System-M image can be reset. Also, an update of the FL3X System-M image can be installed. NOTICE Third-party applications are used in the following. -
Page 26: Battery And Fuse
=> The FL3X System-M uses now the new image. Battery and Fuse The FL3X System-M has a fuse for device protection and a battery for backing up the real-time-clock (RTC). NOTICE To ensure proper function and for warranty reasons do not try to change the fuse or the battery by yourself. -
Page 27: Ordering Information
Ordering Information FL3X System-M Product Description Ordering number The FL3X System-M is multifunctional, autonomous bus system platform FL3X System-M 3-V1050A01 with flexible channel configuration Table 12: FL3X System-M Accessory Parts Product Description Ordering number The FL3X Interface-PMC is a FL3X Interface-PMC 3-V0550A01 PMC bus interface card. -
Page 28: Fl3X Interface-Pcie
7.2.1 FL3X Interface-PCIe For further information, please contact: support-ee@star-cooperation.com. 7.2.2 FL3X Interface-PMC For further information, please contact: support-ee@star-cooperation.com. 7.2.3 FL3X Config Basic For further information, please visit Download Center | STAR ELECTRONICS (flex-product.com). 7.2.4 Quad SFP Card NOTICE The configuration of the Quad SFP Card is handled by the running application software (e.g. -
Page 29: Cmi-10G Dual Port
Data Rate per Port: 10/5/2.5/1 GbE • Compatibility: High Speed CMI Socket GM-1000 • Jumbo Frames Supported: Yes • Teaming Supported: Yes Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 29 of 36... -
Page 30: Wall Mount Kit
Figure 17: Wall mount kit 1 Step 1: The mounting holes are at the bottom side of the system. Use the provided screws to fasten the bracket and the system together. Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified... - Page 31 Figure 18: Wall mount kit 2 Step 2: Fasten the screws through the bracket mounting holes to mount the system onto the wall. Figure 19: Wall mount kit 3 Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified...
-
Page 32: Related Documents
Please contact support- D10_Instructions_for_Use_FL3X_ ee@star-cooperation.com Device_PXIe_and_PCIe [5] 3-01140A01-D011 FL3X Config FL3X Config User Manual Please contact support- UserManual ee@star-cooperation.com Table 14: Related Documents Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 32 of 36... -
Page 33: Appendix
Serial advanced technology attachment Small form-factor pluggable GPIO General purpose input output Peripheral component interconnect PCIe Peripheral component interconnect express Real time clock Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 33 of 36... -
Page 34: List Of Tables
Table 8: LED board connector ..........................21 Table 9: RJ45 ..............................22 Table 10: RJ45 ..............................22 Table 11: Power Button ............................22 Table 12: FL3X System-M ........................... 27 Table 13: Accessory Parts ..........................27 Table 14: Related Documents ..........................32 Created by STAR ELECTRONICS GmbH &... -
Page 35: List Of Figures
Figure 6: FL3X System-M - Rear slots – STAR Slot 1 & 2 mounted with FL3X Interface-PCIe ........ 17 Figure 7: FL3X System-M - Rear slots – STAR Slot 1 & 2 mounted with Quad SFP Card ........17 Figure 8: FL3X System-M – available Slots for the ‘Mini PCIe SFP Single’ module ..........18 Figure 9: FL3X System-M - Front interfaces ...................... - Page 36 STAR ELECTRONICS GmbH & Co. KG A Company of the STAR COOPERATION Group Jahnstrasse 86 73037 Goeppingen Germany Phone: +49 (0)7031 6288-5656 Info@star-cooperation.com www.flex-product.com Created by STAR ELECTRONICS GmbH & Co. KG Date created 2025-04-07 Date modified 2025-04-07 Page 36 of 36...
Need help?
Do you have a question about the FL3X System-M and is the answer not in the manual?
Questions and answers