Related Manuals for Jefferson INFERNO iR125
Summary of Contents for Jefferson INFERNO iR125
- Page 1 Infrared Direct Air Heater with Thermostatic Control JEFHTRAD125TC User Manual v.1.1 RoHS...
-
Page 3: Table Of Contents
ABOUT THIS DOCUMENT This manual has been compiled by Jefferson Tools and is an integrated part of the product with which it's enclosed and should be kept with it for future reference. Please read all of the information supplied in this User Manual before operating this product. -
Page 4: Introduction
JEFHTRAD125TC 125,000 BTU Infrared Direct Oil Heater INTRODUCTION The Jefferson iR125 Infrared Direct Oil Heater produces 125,000 BTU/H (36.6kW) of infrared heat which is ideal • for heating large well-ventilated spaces including garages and warehouses Suitable for use with diesel, kerosene or paraf n fuel •... -
Page 5: Safety Guidelines
Keep work area clear around the machine. Cluttered areas can cause accidents and injuries. • Check the equipment and cabling before use. Never use the heater if any damage is detected. Contact Jefferson • Tools for help and advice on all aspects or repair or maintenance of this equipment. - Page 6 USER MANUAL v1.1 JEFHTRAD125TC 125,000 BTU Infrared Direct Oil Heater ELECTRICAL SAFETY Ensure that you check the equipment thoroughly to ensure it is safe and fit for purpose before each use. It is important that you inspect all plugs, sockets, power cables and electrical fittings for wear and damage and repair or replace any defective components.
-
Page 7: Working Environment
USER MANUAL v1.1 JEFHTRAD125TC 125,000 BTU Infrared Direct Oil Heater WORKING ENVIRONMENT . WARNING! Only operate and refuel/fuel the heater in well ventilated areas. careful consideration must be given to the placement of the heater to provide safe and comfortable heating. Ensure continuous ventilation is provided to the heater operating area. -
Page 8: Unpacking & Assembly
USER MANUAL v1.1 JEFHTRAD125TC 125,000 BTU Infrared Direct Oil Heater UNPACKING & ASSEMBLY www.jeffersontools.com... -
Page 9: Operating Principle
125,000 BTU Infrared Direct Oil Heater OPERATING PRINCIPLE The Jefferson iR125 Direct Oil heater produces up to 125,000BTU/H (36.6kW) of infrared heat, which warms objects rather than the air. Infrared is the same heat we feel from an environment warmed by the sun and makes this heater an ideal solution for heating large well-ventilated spaces like garages and warehouses. -
Page 10: Operating Instructions
USER MANUAL v1.1 JEFHTRAD125TC 125,000 BTU Infrared Direct Oil Heater OPERATING INSTRUCTIONS STARTING THE HEATER 1. Fill the fuel tank until the fuel gauge points to "F". 2. Ensure the fuel cap is securely replaced. 3. Plug the mains lead into a suitable power socket and turn the mains switch on. 4. -
Page 11: Maintenance
Clean every 150-200 hours of operation or when necessary. Empty and rinse with fresh fuel. Nozzle Clean or replace once per season or when necessary. Contact Jefferson Tools or Service Centre. Photocell Clean once per season or when necessary. Contact Jefferson Tools or Service Centre. -
Page 12: Parts Diagram
USER MANUAL v1.1 JEFHTRAD125TC 125,000 BTU Infrared Direct Oil Heater PARTS DIAGRAM www.jeffersontools.com... -
Page 13: Parts List
USER MANUAL v1.1 JEFHTRAD125TC 125,000 BTU Infrared Direct Oil Heater PARTS LIST Description Description Fuel Tank Burner Bracket Fuel lter Burner Head Gasket Float Sensor In Diffusion Float Sensor Packing Control Base Fuel Pipe Power Cord Return Pipe Cord Bush Pipe Packing Return Hose Joint Pipe Photocell... -
Page 14: Energy Related Products (Erp) Directive Information
Permanent pilot flame power requirement Pilot ame power Ppilot requirement (if applicable) Contact Details Jefferson Professional Tools & Equipment 24 Lisgorgan Lane, Upperlands, BT46 5TE Tel: +44 (0)1244 646 048 (UK) / +353 (0)1473 0300 (ROI) Email: info@jeffersontools.com Website: www.jeffersontools.com... -
Page 15: Environmental Protection
Jefferson Professional Tools & Equipment, or hereafter "Jefferson" warrants its customers that its products will be free of defects in workmanship or material. Jefferson shall, upon suitable noti cation, correct any defects, by repair or replacement, of any parts or components of this product that are determined by Jefferson to be faulty or defective. - Page 16 Before attempting to use this product please read all the safety precautions and operating instructions outlined in this manual to reduce the risk of fire, electric shock or personal injury. Jefferson Professional Tools & Equipment 24 Lisgorgan Lane, Upperlands, BT46 5TE Tel: +44 (0)1244 646 048 (UK) / +353 (0)1473 0300 (ROI) Email: info@jeffersontools.com...
Need help?
Do you have a question about the INFERNO iR125 and is the answer not in the manual?
Questions and answers