Advertisement
Quick Links
CT-WirelessPTT MIL
Quick guide
pairing button
status LED
Pairing
1 Place the CT-WirelessPTT MIL close to the other
device (< 50 cm).
2 Press the pairing button until the LED turns blue.
3 Start the pairing process on the other device. The
LED flashes
4 The pairing is successful if the LED turns green.
If an error occurs, the LED turns red. In this case repeat
the pairing process.
dok1828-en-03-1024
blue
during the procedure.
function button +
PTT button
function button -
Advertisement
Related Manuals for CeoTronics CT-WirelessPTT MIL
Summary of Contents for CeoTronics CT-WirelessPTT MIL
- Page 1 PTT button status LED function button - Pairing 1 Place the CT-WirelessPTT MIL close to the other device (< 50 cm). 2 Press the pairing button until the LED turns blue. 3 Start the pairing process on the other device. The...
- Page 2 When the LED starts flashing red it is recommended to change the battery. The recommended type of battery for optimal use with the CT-WirelessPTT is CR2032. CeoTronics part number: 4008014 dok1828-en-03-1024...
Need help?
Do you have a question about the CT-WirelessPTT MIL and is the answer not in the manual?
Questions and answers