Download Print this page

Campania International Charente FT-279 Assembly Instructions

Advertisement

Quick Links

Fountain Components
Image
Item Description
Charente
Fountain - Finial
La Mirande
Fountain - Small
Bowl
Charente
Fountain -
Pump Cover
Charente
Fountain -
Pump Cover
Door
Charente
Fountain - Large
Bowl
Charente
Fountain -
Pedestal
Fountain Information:
• Two people are recommended for the installation of this fountain!
• This fountain holds approximately 10 gallons of water.
• This fountain uses a large fountain cover: FTNCOV-LG
• Compatible with #10 Refill Device and LED kits
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPF140 - 140 GPH Pump (6 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Hammer
Component
Quantity
Item #
FT-279A
1
FT-289B
1
FT-279C
1
FT-279D
1
FT-279E
1
FT-279F
1
FT-279 Charente Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK140 Pump
(use large adapter only)
#10 Stopper
Approx. 15" length of 1/2" black
non-kink tubing
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
Wedges
6
2
rev 09/01/2023

Advertisement

loading
Need help?

Need help?

Do you have a question about the Charente FT-279 and is the answer not in the manual?

Questions and answers

Summary of Contents for Campania International Charente FT-279

  • Page 1 FT-279 Charente Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 10 gallons of water. • This fountain uses a large fountain cover: FTNCOV-LG • Compatible with #10 Refill Device and LED kits •...
  • Page 2 FT-279 Charente Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
  • Page 3 FT-279 Charente Fountain Assembly Instructions NOTE: The small bowl (FT-289B) may have shifted in shipping resulting in uneven pipe lengths. This can be fixed by gently tapping the pipes back in place with a hammer or similar tool. Step 8 - Center the small bowl (FT-289B) over the pump house (FT-279C). Step 9 - Use a hose clamp to secure the other end of the non-kink tubing to the pipe protruding from the bottom of the small bowl (FT-289B).
  • Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - Ensure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.