Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Torpedo7 Quest
Summary of Contents for Torpedo7 Quest
- Page 1 Torpedo7 Quest, Wanderer & Viper HOME ASSEMBLY INSTRUCTIONS...
- Page 2 Torpedo7 store and book in with our workshop for assembly, free of charge. Alternatively, if you do not have a Torpedo7 store close by, any local bike store will be able to assist in building your bike. A service fee may apply.
- Page 3 Remove the bike from the box, carefully remove all Ensure the fork is in the correct orientation, with packaging and set aside any parts so you have a the brake facing forwards. Unclip the brake noodle clear working space. Have someone to assist while to allow the wheel to pass through.
- Page 4 Use the 5mm allen key to loosen the cable clamp. Centre the brake using the Phillips screw on the Pull the cable through to adjust the brake until the side you would like to move. Tightening (clockwise) will add tension and move the pad away from the pads are around 3-5mm away from the rim and not rim, loosening (anticlockwise) will remove tension contacting the tyre.
- Page 5 (Fig 4) (Fig 3) To adjust the shifting, lift the rear wheel off the Once in 1 gear, check and adjust the low limit ground and rotate the cranks, use the gear selector screw (Fig 3) until it is just touching the derailleur to change gear one by one, to get to 1 gear.
Need help?
Do you have a question about the Quest and is the answer not in the manual?
Questions and answers