Advertisement
Quick Links
Advertisement
Related Manuals for Kaptia Simply II 433
Summary of Contents for Kaptia Simply II 433
- Page 1 Simply II 433 Simply II 433 Quick user guide 09/2024 Page 1...
- Page 2 Thanks to perio- dic updates, new compatibilities are introduced remotely on these devices, which avoids returns and allows stock to be reduced. There are models for the 433 and 868 MHz band, both compatible with the Kaptia Klever system. Status led...
- Page 3 Operation To program the remote control, it must be connected to the micro USB cable of the Kaptia Klever duplicator. The app will guide you through all the necessary steps until programming is complete. Indicator light The device LED reports the following situations:...
- Page 4 Battery replacement This remote control works with 1 NON-RECHARGEABLE battery type CR2032. To replace them, you must lever the notch on the right side with a coin or similar object until it opens. Once opened, the used batteries must be removed from the battery holder and replaced with new ones of the same type, respecting the polarity.
- Page 5 Range < 100 meters Status LED color White Battery 1 x 3V (type CR2032) Supported system: Kaptia Klever / Key (433 version only) Updatable: Yes Important: The programming connector should only be used to program the device. Using this connector for any other purpose may damage the device.
Need help?
Do you have a question about the Simply II 433 and is the answer not in the manual?
Questions and answers