Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kaptia Multi II 433
Summary of Contents for Kaptia Multi II 433
- Page 1 Multi II 433 Quick user guide 09/2024 Page 1...
- Page 2 (fixed and rolling codes) whose frequencies are in the 433 MHz band on the same remote control. Thanks to its periodic updates, new compatibilities are introduced remotely in these devices, which avoids returns, and reduces stock. This device is compatible with the Kaptia Klever system. Status led Button 1...
- Page 3 Operation To program the remote control, it must be connected to the micro USB cable of the Kaptia Klever duplicator. The app will guide you through all the necessary steps until programming is complete. Advanced Features This remote allows button combinations, which can be programmed to increase the number of codes on the same remote.
- Page 4 Battery replacement This remote control works with 1 NON-RECHARGEABLE battery type CR2032. To replace them, you must lever the notch on the right side with a coin or similar object until it opens. Once opened, the used batteries must be removed from the battery holder and replaced with new ones of the same type, respecting the polarity.
- Page 5 Range < 100 meters Status LED color Green / Red Battery 1 x 3V (type CR2032) Compatible system Kaptia Klever / Key Updatable Yes Important: The programming connector should only be used to program the device. Using this connector for any other purpose may damage the device.
Need help?
Do you have a question about the Multi II 433 and is the answer not in the manual?
Questions and answers