Advertisement
EasyNet
150
Hz
Congratulations with your new EasyNet 150 Hz
Manual anaesthetization
EasyNet was designed in 1989 and tested with extremely fine results, i.e. very
satisfactory reliability.
EasyNet operates fish from 20 grams up to 1000 grams.
EasyNet is constructed as a basic machine, where it is possible to add on a dewater
system so it is possible to operated the machine fully automatically.
Order the EasyNet without the dewater system and later, if needed, upgrade with the
dewater system.
Before starting up for the first time, we recommend you read the EasyNet 150
manual in order to have the optimal use of the machine.
On receipt of the machine, please, inspect for transportation damage.
EasyNet 150 Hz
Edition 2 >>2021<<<
Advertisement
Table of Contents
Related Manuals for Rossi EasyNet
Summary of Contents for Rossi EasyNet
- Page 1 EasyNet operates fish from 20 grams up to 1000 grams. EasyNet is constructed as a basic machine, where it is possible to add on a dewater system so it is possible to operated the machine fully automatically. Order the EasyNet without the dewater system and later, if needed, upgrade with the dewater system.
- Page 2 EasyNet 150 Hz with EasyBuff 2000 SP EasyBuff Edition 1 >>2021<<<...
-
Page 3: Powering Up The Machine
Powering up the machine When powering the EasyNet 150 Hz up this page pups up Press Start ”clockwise” and turn the paddle round until you See the paddle in Anesthetic position Then press ”Load data” press 3 sec. Now the machine... - Page 4 Display Structure EasyNet 150 Numerale Keypad EasyNet 150 Hz Edition 2 >>2021<<<...
-
Page 5: Emergency Stop
By reset emergency the paddle start to turn (need to find the zero point) and after it has stopped in anesthetic position, press run and its is ready Press Stop and the paddle turns to anesthetic position and stop her EasyNet 150 Hz Edition 2 >>2021<<<... - Page 6 Adjust settings Press ”Option” You see next page Press ”EasyNet 150 hz” You see next page For adjustments se page 7 EasyNet 150 Hz Edition 2 >>2021<<<...
-
Page 7: Adjust Settings
Factory settings Anastetic to dewater 40Hz Dewater to fish out 20Hz Fish out and back to anastetic 30Hz In case of too many fish on the paddle, the speed maybe need to be increased Edition 2 >>2021<<< EasyNet 150 Hz... - Page 8 By restart the timer starts from zero again Can also be used as back up program if 1 of thies scenario shut occur the Pulse system fails the Zero function fails EasyNet 150 Hz Edition 2 >>2021<<<...
- Page 9 The paddle starts and stop by pressing the remote start 5 Select Manuel run no programmed stop, delay´s The paddle starts and stop by pressing the remote start 8 Step mode with stop With programmed stops, with out delay´s EasyNet 150 Hz Edition 2 >>2021<<<...
- Page 10 Remote start of EasyBuff EasyNet programs 1/2/3 & 4 If you have purchased an EasyNet together with an EasyBuff, you can connect these machines together, so that EasyBuff is controlled by EasyNet To make remote control of EasyBuff to work, there has to be installed 2 wire, where Blue wire is common minus 24 Vdc &...
- Page 11 You have to move 3 wires as shown on drawing With this wiring is EasyNet & EasyBuff operated with separate remote control boxes for individual start One Box for EasyNet & 1 Box for EasyBuff EasyNet 150 Hz Edition 2 >>2021<<<...
- Page 12 NB. The speed drive can be adjusted during run in the all chosen programs Example: Parameter “4.2” Press then until you see 4.0 Press until 4.2 then Type in the new value (0.1) and press EasyNet 150 Hz Edition 2 >>2021<<<...
- Page 13 Fieldbus P 4.2 Acceleration time P 4.3 Deceleration time When 17.2 is set on ”0” all parameters in speed drive can be adjusted P 17.2 All parameter Der skal også indtastes i system parameter EasyNet 150 Hz Edition 2 >>2021<<<...
- Page 14 P 2.4 Baud 19200 P 2.6 None Dip switch on Vacon 20 > 1 & 4 on This is as standart ”Off” Press to on Rækken med 4 dip efter justering alle on Motor plate EasyNet 150 Hz Edition 2 >>2021<<<...
-
Page 15: Pulse System
The magnet has to be adjusted so the distant to the encoder is be twin 8 to 15 mm NB Don’t use ion nuts, or screws Stainless Steel ore Brass only EasyNet 150 Hz Edition 2 >>2021<<<... - Page 16 Vacon 20 0,37KW 2 Power supply 24 Vdc Idec 3 Relays 24 Vdc 12 Amp Idec 4 Fuse 230 Vac 5 Amp Dia. 5mm x 20 5 Fuse 24 Vdc 2 amp Dia. 5mm x 20 EasyNet 150 Hz Edition 2 >>2021<<<...
-
Page 17: Overall Drawing
Option : on order quick drain of the content PVC pips 4 wheels 2 wheels 2 feet Option feet Length on order “max 1000 mm” Standard 800 mm EasyNet 150 Hz Edition 2 >>2021<<<... - Page 18 Operations step by step Fish entering EasyNet Dewater position Exit to EasyVac New cycle Rotation counter clockwise EasyNet 150 Hz Edition 2 >>2021<<<...
- Page 19 Dimensional sketch EasyNet 150 Hz EasyNet 150 Hz Edition 2 >>2021<<<...
-
Page 20: Water Content
Water content The scale is divided up into 50 litre mark The EasyNet 150 Hz contain max volume of water Max. 300 litres Normal amount of water 150 to 200 litres The time used fore dewatering 300 L app. 1,45 min “one outlet only”... - Page 21 Oxygen & Dewater inlet Oxygen All EasyNet models are equipped with oxygen diffuser Connect the oxygen to the blue air hose Adjust the flow of oxygen according to your needs Inlet dewater system (Option) The dewater inlets are made in stainless steel rods with a diameter...
- Page 22 Option 110 Vac It is possible to get the EasyNet 150 Hz, equipped as 110V ac machine to do so, we build in one transformer witch is placed on the machine frame close to the motor. fore the safety we use a transformer with galvanic separation,...
-
Page 23: Technical Information
The 2-30 volt is not dangerous, but the fish will feel it If earth is not available take a wire 6 mm² and mount it to the machine then put the other end in the water EasyNet 150 Hz Edition 2 >>2021<<<... -
Page 24: Declaration Of Conformaty
Sandøvej 7 DK- 8700 Horsens Phone : +45 28 400 368 Mail.: rossi@profibermail.dk hereby declares that EasyNet 150 Hz Type: Year / week : 2020 /49 Product No : 10.125 A was manufactured in accordance with the regulations of the Council’s directive of the 14th June 1989 on mutual approximation of the member states’... - Page 25 Sandøvej 7 DK- 8700 Horsens Phone : +45 28 400 368 Mail.: rossi@profibermail.dk hereby declares that EasyNet 150 Hz Type: Year / week : 2020 /49 Product No : 10.125 C was manufactured in accordance with the regulations of the Council’s directive of the 14th June 1989 on mutual approximation of the member states’...
Need help?
Do you have a question about the EasyNet and is the answer not in the manual?
Questions and answers