Automatic Oven Cooking - DeLonghi DMFPSII Installation And Service Instructions Manual

AUTOMATIC OVEN COOKING

To cook food automatically in the oven, it is necessary to:
1.Set the length of the cooking time
2.Set the end of the cooking time
3.Set the temperature and the oven cooking program.
These operations are performed as follows:
1.Set the length of the cooking time by pushing the
to advance, or
The AUTO and the
2.Set the end of the cooking time by pressing the
added to the clock time will appear), and the
desired time you may get back by pushing the
After this setting, the
on the panel and a buzzer sounds, it means there was an error in the programming.
If this is the case, modify the end of cooking time or the cooking time itself by
repeating the procedure above.
3.Set the temperature and the cooking program by using the switch and thermostat
knobs of the oven (see specific chapters).
The oven is now set to turn on and off at the programmed times.
During cooking, the
the time that remains until the end of cooking.
The cooking program may be cancelled in any time by pushing
At the end of the cooking time the oven will turn off automatically, the
will turn off, AUTO will flash and a buzzer will sound, which can be turned off by
pushing any of the buttons.
Turn the temperature and thermostat knobs to zero and set the programmer to "man-
ual" by pressing the
Attention: A power failure resets the clock back to zero and cancels the set programs.
After a power failure, three zeros will flash on the panel.
22
to go back if you have passed the desired time (fig. 21).
symbol will be on.
symbol will go off. If after this setting, the AUTO flashes
symbol remains on. By pushing the
button.
Figure 21
P
A
U
T
O
button and the
button (the cooking time already
button (fig. 22); if you pass the
button.
button you can see
.
button
symbol