◦ If it turns off, it is programmed for your component ◦ If it does not turn off, use the Pre-Programmed 3-Digit code Method or Scanning Method 4. Repeat the steps above for both components (DTA, TV) if needed https://astound-prod.mindtouch.us/all-equipment/remote-controls/dta-hddta/ur2-dta Updated: Sat, 08 Mar 2025 00:44:30 GMT Powered by...
Page 3
4. Once you have found the correct code, save it by pressing the same [DEVICE] button one more time ◦ The DTA LED light will blink twice to confirm that the code was sucessfully stored https://astound-prod.mindtouch.us/all-equipment/remote-controls/dta-hddta/ur2-dta Updated: Sat, 08 Mar 2025 00:44:30 GMT Powered by...
5. The DTA LED light will blink twice to confirm that the code was successfully stored. 6. Repeat the Auto-Search Method for those Components you could not program earlier with the PreProgrammed Method https://astound-prod.mindtouch.us/all-equipment/remote-controls/dta-hddta/ur2-dta Updated: Sat, 08 Mar 2025 00:44:30 GMT Powered by...
LED will turn off ◦ 10 blinks represents the number zero ▪ Example : 103 would be: One blink (pause) Ten blinks (pause) Three blinks https://astound-prod.mindtouch.us/all-equipment/remote-controls/dta-hddta/ur2-dta Updated: Sat, 08 Mar 2025 00:44:30 GMT Powered by...
Page 6
4. The DTA LED will blink twice to confirm the programming If you wish to have the volume and mute keys operate your DTA Box, repeat these steps using the [DTA] device button in Step 3. https://astound-prod.mindtouch.us/all-equipment/remote-controls/dta-hddta/ur2-dta Updated: Sat, 08 Mar 2025 00:44:30 GMT Powered by...
Page 7
Memory Lock System This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control. https://astound-prod.mindtouch.us/all-equipment/remote-controls/dta-hddta/ur2-dta Updated: Sat, 08 Mar 2025 00:44:30 GMT Powered by...
Need help?
Do you have a question about the UR2-DTA and is the answer not in the manual?
Questions and answers