Oliveri Naples NA3771 Installation Instructions

VITREOUS CHINA
Counter top Basin
Installation instructions for Counter top basin
THIS BASIN MUST BE INSTALLED BY A LICENSED PLUMBER IN
ACCORDANCE WITH LOCAL REGULATIONS
Remove all products from packaging:
Check the product for damage, if the product is damaged return to store of purchase.
Check the product is complete with all components required to install.
This product is to only be installed by a licensed plumber, failing to do so will void
warranty.
This product is to be installed as per Australian Standard and local authority
requirements.
Basin Installation:
1. Determine where on the bench top the basin is to be installed.
2. Place the basin in position and check to ensure the basin waste outlet position
does not interfere with draws, internal walls or waste connection pipe work.
3. Mark the waste hole position on the bench top, using a suitable cutting devise
based on bench top material cut a hole in the bench top large enough to
accommodate the waste being used.
4. Fit waste to basin as per waste installation instruction document.
5. Run a bead of plumbers grade silicone around the underside edge of the basin.
6. Fit basin to bench top, allow silicone to set before proceeding with waste pipe
installation.
2018-12/Version 1.0
Naples
Product code:NA3771
CARE & MAINTENANCE
Avoid using abrasive or acid based cleaning products.
WARRANTY:
This basin is warranted to be free from manufacturing defects for a period of:
10 Years vitreous china
1 Year, parts and labour.
This warranty does not cover against normal wear and will be voided if the product
is misused or not installed in accordance with these instructions.
In the event this product is rendered obsolete and a replacement product is required.
Oliveri Solutions Pty Ltd reserves the right to supply a product of equal substitution
at their discretion.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be acceptable quality and the
failure does not amount to a major failure.
SERVICE
If the basin requires servicing, please contact your installer (preferably the one who
installed it). If the installer is satisfied that the problem is not due to poor installation,
contact T2 Services Pty Ltd for assistances on:
Ph :( 07) 55960738
Fax :( 07) 55273353
Email:oliveri@t2services.com.au
https://oliveri.com.au/service-and-warranty
If the warranty service agent finds that the basin is not faulty, T2 Services Pty Ltd
reserves right to pass on any callout fee to the householder.
NA3771 Installation Instructions