Oliveri Naples NA3771G Installation Instructions

VITREOUS CHINA
Counter Top Circular Basin
Installation instructions for Counter Top Basin
THIS BASIN MUST BE INSTALLED BY A LICENSED PLUMBER IN
ACCORDANCE WITH LOCAL REGULATIONS
Remove all products from packaging:
Check the product for damage, if the product is damaged return to store of purchase.
Check the product is complete with all components required to install.
This product is to only be installed by a licensed plumber, failing to do so will void
warranty.
This product is to be installed as per Australian Standard and local authority
requirements.
Basin Installation:
1. Determine where on the bench top the basin is to be installed.
2. Place the basin in position and check to ensure the basin waste outlet position
does not interfere with draws, internal walls or waste connection pipe work.
3. Mark the waste hole position on the bench top, using a suitable cutting devise
based on bench top material cut a hole in the bench top large enough to
accommodate the waste being used.
4. Fit waste to basin as per waste installation instruction document.
5. Run a bead of plumbers grade silicone around the underside edge of the basin.
6. Fit basin to bench top, allow silicone to set before proceeding with waste pipe
installation.
Oliveri Solutions Pty Ltd ABN 12 007 551 886
51 Naweena Rd, Regency Park SA 5010 P 08 8348 6444 E sales@oliveri.com.au
2018-12/Version 1.0
Naples
NA3771G
CARE & MAINTENANCE
Avoid using abrasive or acid based cleaning products.
WARRANTY FOR DOMESTIC USE
This basin is warranted to be free from manufacturing defects for a period of:
20 years replacement parts and 1 year labour.
Subject to the terms contained in the full warranty information available at
https://oliveri.com.au/service-and-warranty, where a genuine manufacturing defect
arises within the warranty period Oliveri will, at its election, repair the defect or
replace the product.
This warranty does not cover against normal wear and will be voided if the product is
misused or not installed in accordance with these instructions.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be acceptable
quality and the failure does not amount to a major failure.
SERVICE
If the basin requires servicing, please contact your installer (preferably the one who
installed it). If the installer is satisfied that the problem is not due to poor installation,
contact Oliveri's nominated Warranty Service Agent for assistance on:
Ph: (08) 8348 6444 (choose the after sales service and warranty option)
Email: warranty@oliveri.com.au
For full warranty information visit: https://oliveri.com.au/service-and-warranty
If a warranty service call finds that the product does not have a genuine
manufacturing fault, our Warranty Service Agent reserves the right to pass on any
call-out fee to the householder.
NA3771G Installation Instructions