Repacking Instructions - McIntosh C22CE Service Manual

Repacking Instructions

In the event it is necessary to repack the
unit for shipment, the unit must be packed exactly as
shown below.
IMPORTANT - The four plastic feet must
be attached to the bottom of the unit so they will
locate in the four holes of the bottom pad. Failure to
do this will result in shipping damage.
If a shipping carton or any of the interior
parts is needed, please call or write the Customer
Service Department of Mclntosh Laboratory. Order
parts from the accompanying list by part number.
Use the original shipping carton and interior
parts only if they are in good serviceable condition.
TOP PAD
UNIT WITH
(4) FEET ON
BOTTOM COVER
10-32x9/16"
SCREW WITH
WASHER (4)
BOTTOM PAD
INSIDE
CARTON
Mclntosh Laboratory, Inc., 2 Chambers Street, Binghamton, NY 139O3
Telephone (607) 723-3512
Qty.
1
2
1
1
1
4
4
4
1
C22 PREAMPLIFIER
Printed in U.S.A.
Part No. Description
033870 Shipping carton only
033884 Corner pad
033883 Inside carton only
033885 Top pad
033886 Bottom pad
017156 Plastic foot
100160 #10-32 x 9/16" Screw
104080 #10 Flat washer
033915 Shipping carton complete
with all the above parts
INSIDE
CARTON
CORNER
PAD
SHIPPING
CARTON
Part No. 040354
BE032003