Montage und Betriebsanleitung Brillant 1503 ... 1704 LED CG-S Inhaltsverzeichnis Pos. Titel Seite Aufbau Brillant 1503/1504 LED CG-S Aufbau Brillant 1603/1604 LED CG-S Aufbau Brillant 1703/1704 LED CG-S Maßbilder Sicherheitshinweise Normenkonformität/Verwendung Technische Daten Kurzbeschreibung Installation Adressierung Wartung/Instandhaltung Recycling Contents: Pos. Titel Page Construction of Brillant 1503/1504 LED CG-S Construction of Brillant 1503/1504 LED CG-S...
Montage und Betriebsanleitung Brillant 1503 ... 1704 LED CG-S 2 Maßbilder/Dimensional Drawings 1504, 1604, 1704 1504 LED CG-S 1604 LED CG-S 1704 LED CG-S...
Montage und Betriebsanleitung Brillant 1503 ... 1704 LED CG-S 3. Sicherheitshinweise p Die Leuchte ist bestim mungs gemäß in unbeschädigtem und einwandfreiem Zustand zu betreiben! p Als Ersatz dürfen nur Originalteile von CEAG verwendet werden! p Bei Arbeiten an der Notleuchte ist erst die Anlage zu blockieren, der Batteriekreis zu unterbrechen und dann das Netz abzuschalten.Anbei das Hinweisschild auf der Notleuchte: p Vor der ersten Inbetriebnahme muss die Leuchte entsprechend den im Abschnitt Installation genannten Anweisungen geprüft werden!
Montage und Betriebsanleitung Brillant 1503 ... 1704 LED CG-S 5.1 Kurzbeschreibung / Verwendungsbereich Die Rettungszeichenleuchten Brillant LED CG-S sind für den Betrieb an CEAG Sicherheitsbe- leuchtungsanlagen nach EN 50 172, DIN VDE 0100-718 und E DIN VDE 0108-100 geeignet. Die besondere Schalt- und Überwachungsfunktion wird nur mit CEAG CG-S-Technologie ermöglicht.
Mounting and Operating Instructions Brillant 1503 ... 1704 LED CG-S 3. Safety Notes p The luminaire shall only be used for its intended purpose and in an indamaged and perfect condition! p Only genuine CEAG spare parts may be used for replacement and repair! p When working on the emergency luminaire first the system must be blocked, battery operation must be interrupted and mains must be cut off.
Mounting and Operating Instructions Brillant 1503 ... 1704 LED CG-S 5.1 Brief description / Scope of application The exit luminaires Brillant LED CG-S are suitable for operation on CEAG emergency lighting sy- stems acc. to EN 50 172, DIN VDE 0100-718 and E DIN VDE 0108-100. The advanced switching and monitoring mode is only available in combination with CEAG CG-S-technology.
Need help?
Do you have a question about the CEAG Brillant 1704 LED CG-S and is the answer not in the manual?
Questions and answers